Optical detection of indocyanine green encapsulated biocompatible poly (lactic-co-glycolic) acid nanoparticles with photothermal optical coherence tomography

We describe a functional imaging paradigm that uses photothermal optical coherence tomography (PT-OCT) to detect indocyanine green (ICG)-encapsulated biocompatible poly(lactic-co-glycolic) acid (PLGA) nanoparticles embedded in highly scattering tissue phantoms with high resolution and sensitivity. The ICG-loaded PLGA nanoparticles were fabricated using a modified emulsification solvent diffusion method. With a 20 kHz axial scan rate, PT-OCT based on spectral-domain interferometric configuration at 1310 nm was used to detect phase changes induced by a 808 nm photothermal excitation of ICG-encapsulated PLGA nanoparticles. An algorithm based on Fourier transform analysis of differential phase of the spectral interferogram was developed for detecting the depth resolved localized photothermal signal. Excellent contrast difference was observed with PT-OCT between phantoms containing different concentrations of ICG-encapsulated PLGA nanoparticles. This technique has the potential to provide simultaneous structural and molecular-targeted imaging with excellent signal-to-noise for various clinical applications.     

Mechanism by which a frictionally confined rod loses stability under initial velocity and position perturbations

We present a theory to reveal for the first time the distinct mechanisms by which a compressed rod confined in a channel buckles in the presence of dry friction. Contrary to the case of a frictionless contact, with friction the system can bear substantially enhanced compressive load without buckling after its stiffness turns negative, and the onset of instability is strongly affected by the amount of perturbation set by the environment. Our theory, confirmed by simulations, shows that friction enhances stability by opening a wide stable zone in the perturbation space. Buckling is initiated when the applied compressive force is such that the boundary of the stable zone touches a point set by the environment, at a much higher critical load. Furthermore, our analysis shows that friction has a strong effect on the buckling mode; an increase in friction is found to lead to higher buckling modes.     

The origin of inter-dimer-row correlated adsorption for NH3 on Si(0 0 1)

We discuss the interaction between adsorbing ammonia molecules and pre-adsorbed ammonia fragments on the Si(0 0 1) surface, searching for experimental evidence of a H-bonded precursor state predicted by modelling. While correlations along dimer rows have already been identified, these mix substrate-mediated effects due to dimer buckling with ammonia–adsorbate effects. Correlations between fragments on neighbouring dimer rows are not affected by substrate effects (in this system), allowing an analysis of direct ammonia–adsorbate effects. We present an analysis of cross-row correlations in existing high-coverage STM data which shows significant correlations between NH₂ groups on neighbouring dimer rows over a significant range, providing evidence for the H-bonded precursor state with a range of around 10 Å. We discuss implications for the interpretation of STM images of ammonia on Si(0 0 1).     

On Invariants of Graphs Related to Quantum {\mathfrak {sl}(2)} at Roots of Unity

We show how to define invariants of graphs related to quantum sl ₂ when the graph has more then one connected component and components are colored by blocks of representations with zero quantum dimensions.     

Development of a Seebeck coefficient Standard Reference Material

We have successfully developed a Seebeck coefficient Standard Reference Material (SRM^™), Bi₂Te₃, that is crucial for inter-laboratory data comparison and for instrument calibration. Certification measurements were performed using two different techniques on 10 samples randomly selected from a batch of 390 bars. The certified Seebeck coefficient values are provided from 10 to 390 K. The availability of this SRM will validate the measurement accuracy, leading to a better understanding of the structure/property relationships, and the underlying physics of new and improved thermoelectric materials. An overview of the measurement techniques and data analysis is given.     

Development of ultrahigh energy resolution gamma spectrometers for nuclear safeguards

We are developing superconducting ultrahigh resolution gamma-detectors for non-destructive analysis (NDA) of nuclear materials, and specifically for spent fuel characterization in nuclear safeguards. The detectors offer an energy resolution below 100 eV FWHM at 100 keV, and can therefore significantly increase the precision of NDA at low energies where line overlap affects the errors of the measurement when using germanium detectors. They also increase the peak-to-background ratio and thus improve the detection limits for weak gamma emissions from the fissile Pu and U isotopes at low energy in the presence of an intense Compton background from the fission products in spent fuel. Here we demonstrate high energy resolution and high peak-to-background ratio of our superconducting Gamma detectors, and discuss their relevance for measuring actinides in spent nuclear fuel.     

SQUID-detected microtesla MRI in the presence of metal

In magnetic resonance imaging performed at fields of 1 T and above, the presence of a metal insert can distort the image because of susceptibility differences within the sample and modification of the radiofrequency fields by screening currents. Furthermore, it is not feasible to perform nuclear magnetic resonance (NMR) spectroscopy or acquire a magnetic resonance image if the sample is enclosed in a metal container. Both problems can be overcome by substantially lowering the NMR frequency. Using a microtesla imaging system operating at 2.8 kHz, with a superconducting quantum interference device as the signal detector, we have obtained distortion-free images of a phantom containing a titanium bar and three-dimensional images of an object enclosed in an aluminum can; in both cases high-field images are inaccessible.     

Photochromic Benzo[b]phosphole Alkynylgold(I) Complexes with Mechanochromic Property to Serve as Multistimuli‐Responsive Materials

A series of novel benzo[b]phosphole alkynylgold(I) complexes has been demonstrated to display photochromic and mechanochromic properties upon applying the respective stimuli of light and mechanical force. Promising multistimuli‐responsive properties of this series of gold(I) complexes have been successfully achieved through judicious molecular design, which involves incorporation of the photochromic dithienylethene‐containing benzo[b]phosphole into the triphenylamine‐containing arylethynyl ligand that is susceptible to mechanical force‐induced color changes via gold(I) complexation. With excellent thermal irreversibility and robust fatigue resistance of this series of gold(I) complexes, multicolor states controlled by the photochromism and mechanochromism have been realized. Repeatable photochromic and mechanochromic cycles without apparent loss of reactivity have also been observed under ambient conditions. The present work provides important insight and an alternative strategy for the molecular design of multistimuli‐responsive materials, paving the way for further development of the underexplored photoresponsive gold(I) complexes and the multistate photocontrolled system.