Effect of variable viscosity on the peristaltic transport of a Newtonian fluid in an asymmetric channel

The effect of variable viscosity on the peristaltic flow of a Newtonian fluid in an asymmetric channel has been discussed. Asymmetry in the flow is induced due to travelling waves of different phase and amplitude which propagate along the channel walls. A long wavelength approximation is used in the flow analysis. Closed form analytic solutions for velocity components and longitudinal pressure gradient are obtained. The study also shows that, in addition to the effect of mean flow parameter, the wave amplitude also effect the peristaltic flow. This effect is noticeable in the pressure rise and frictional forces per wavelength through numerical integration.     

Copolyesteramides: synthesis and kinetic analysis

The synthesis of copolyesteramides using para-acetamido benzoic acid (PABA) and polyethylene terephthalate (PET) by melt polymerization has been studied in detail. The performance of three transesterification catalysts are assessed for three different initial compositions, PABA 60 mol%/PET 40%, PABA 50 mol%/PET 50% and PABA 40 mol%/PET 60%. The polycondensations are found to obey second order kinetics, irrespective of whether the reaction was catalysed or not. The mechanism of initial stage polymerization kinetics of the copolymers has been fully explained.It is suggested that acetic acid is evolved only by the homopolymerization of PABA and that the insertion of a monomer of homopolymer of PABA into PET does not yield any acetic acid. A set of differential equations containing three different rate constants, k₁ for homopolymerization of PABA, k₂ for PET reaction with dimer of PABA and k₃ for PABA reaction with copolymer of PABA and PET has been developed and numerically solved, to study the initial stage kinetics. The computed values of acetic acid are compared with the experimentally collected amount and the three rate constants are optimized using a differential algebraic optimization technique. The present model represents the data with an acceptable accuracy with an average % error of less than 5% between experimental and computed values for the entire experimental range. The correlation coefficient values range between 0.988 and 0.999.Differential scanning analysis of the copolyestermides indicates that 40 mol% PABA and 60% PET had the highest enthalpy values of the order of 18 kJ/mol. It is found that within the copolyesteramide series the degree of crystallinity increased with the increase of PET contents in the feed mixture to the batch reactor.     

Experimental Study of Effect of Temperature Variations on the Impedance Signature of PZT Sensors for Fatigue Crack Detection

Structural health monitoring (SHM) is recognized as an efficient tool to interpret the reliability of a wide variety of infrastructures. To identify the structural abnormality by utilizing the electromechanical coupling property of piezoelectric transducers, the electromechanical impedance (EMI) approach is preferred. However, in real-time SHM applications, the monitored structure is exposed to several varying environmental and operating conditions (EOCs). The previous study has recognized the temperature variations as one of the serious EOCs that affect the optimal performance of the damage inspection process. In this framework, an experimental setup is developed in current research to identify the presence of fatigue crack in stainless steel (304) beam using EMI approach and estimate the effect of temperature variations on the electrical impedance of the piezoelectric sensors. A regular series of experiments are executed in a controlled temperature environment (25°C–160°C) using 202 V1 Constant Temperature Drying Oven Chamber (Q/TBXR20-2005). It has been observed that the dielectric constant ε₃₃^T which is recognized as the temperature-dependent constant of PZT sensor has sufficiently influenced the electrical impedance signature. Moreover, the effective frequency shift (EFS) approach is optimized in term of significant temperature compensation for the current impedance signature of PZT sensor relative to the reference signature at the extended frequency bandwidth of the developed measurement system with better outcomes as compared to the previous literature work. Hence, the current study also deals efficiently with the critical issue of the width of the frequency band for temperature compensation based on the frequency shift in SHM. The results of the experimental study demonstrate that the proposed methodology is qualified for the damage inspection in real-time monitoring applications under the temperature variations. It is capable to exclude one of the major reasons of false fault diagnosis by compensating the consequence of elevated temperature at extended frequency bandwidth in SHM.     

Ternary systems Sr-{Ni,Cu}-Si: Phase equilibria and crystal structure of ternary phases

Phase relations were established in the Sr-poor part of the ternary systems Sr-Ni-Si (900 °C) and Sr-Cu-Si (800 °C) by light optical microscopy, electron probe microanalysis and X-ray diffraction on as cast and annealed alloys. Two new ternary compounds SrNiSi₃ (BaNiSn₃-type) and SrNi_9−xSi_4+x (own-type) were found in the Sr-Ni-Si system along with previously reported Sr(Ni_xSi_1−x)₂ (AlB₂-type). The crystal structure of SrNi_9−xSi_4+x (own-type, x=2.7, a=0.78998(3), c=1.1337(2) nm; space group P4/nbm) was determined from X-ray single crystal counter to be a low symmetry derivative of the cubic, parent NaZn₁₃-type. At higher Si-content X-ray Rietveld refinements reveal the formation of a vacant site (□) corresponding to a formula SrNi_5.5Si_6.5□_1.0. Phase equilibria in the Sr-Cu-Si system are characterized by the compounds SrCu_2−xSi_2+x (ThCr₂Si₂-type), Sr(Cu_xSi_1−x)₂ (AlB₂-type), SrCu_9−xSi_4+x (0≤x≤1.0; CeNi_8.5Si_4.5-type) and SrCu_13−xSi_x (4≤x≤1.8; NaZn₁₃-type). The latter two structure types appear within a continuous solid solution. Neither a type-I nor a type-IX clathrate compound was encountered in the Sr-{Cu,Ni}-Si systems.Structural details are furthermore given for about 14 new ternary compounds from related alloy systems with Ba.     

Crystal structure and physical properties of quaternary clathrates Ba8ZnxGe46−x−ySiy, Ba8(Zn,Cu)xGe46−x and Ba8(Zn,Pd)xGe46−x

Three series of vacancy-free quaternary clathrates of type I, Ba₈Zn_xGe_46−x−ySi_y, Ba₈(Zn,Cu)_xGe_46−x, and Ba₈(Zn,Pd)_xGe_46−x, have been prepared by reactions of elemental ingots in vacuum sealed quartz at 800 °C. In all cases cubic primitive symmetry (space group Pm3?n, a∼1.1 nm) was confirmed for the clathrate phase by X-ray powder diffraction and X-ray single crystal analyses. The lattice parameters show a linear increase with increase in Ge for Ba₈Zn_xGe_46−x−ySi_y. M atoms (Zn, Pd, Cu) preferably occupy the 6d site in random mixtures. No defects were observed for the 6d site. Site preference of Ge and Si in Ba₈Zn_xGe_46−x−ySi_y has been elucidated from X-ray refinement: Ge atoms linearly substitute Si in the 24k site whilst a significant deviation from linearity is observed for occupation of the 16i site. A connectivity scheme for the phase equilibria in the “Ba₈Ge₄₆” corner at 800 °C has been derived and a three-dimensional isothermal section at 800 °C is presented for the Ba-Pd-Zn-Ge system. Studies of transport properties carried out for Ba₈{Cu,Pd,Zn}_xGe_46−x and Ba₈Zn_xSi_yGe_46−x−y evidenced predominantly electrons as charge carriers and the closeness of the systems to a metal-to-insulator transition, fine-tuned by substitution and mechanical processing of starting material Ba₈Ge₄₃. A promising figure of merit, ZT ∼0.45 at 750 K, has been derived for Ba₈Zn_7.4Ge_19.8Si_18.8, where pricey germanium is exchanged by reasonably cheap silicon.     

Living fungal hyphae-templated porous gold microwires using nanoparticles as building blocks

Abstract  

A simple and environmentally benign green method is reported to decorate growing fungal hyphae with high loading of gold nanoparticles, which were initially produced using aqueous tea extract as a sole reducing/stabilizing agent. Inoculation of fungal spores in aqueous suspension of nanoparticles led to the growth of intensely red-coloured fungal hyphae due to the accumulation of gold nanoparticles. Heat treatment of these hybrid materials led to the formation of porous gold microwires. This report is thus an interesting example of using green and sustainable approach to produce nanostructured materials which have potential applications in catalysis, sensing and electronics.     

A sunlight-induced method for rapid biosynthesis of silver nanoparticles using an <Emphasis Type="Italic">Andrachnea chordifolia</Emphasis> ethanol extract

In this study a sunlight-induced method for rapid synthesis of silver nanoparticles using an ethanol extract of Andrachnea chordifolia is described. The silver nitrate solutions (1 mM) containing the ethanol extract of Andrachnea chordifolia were irradiated by both sunlight radiation and by sunlight radiation passed through different colored filters (red, yellow or green). The smallest size of silver nanoparticles was obtained when a silver ion solution was irradiated for 5 minutes by direct sunlight radiation. Further examination of the shape and size and of the surface chemistry of these biogenic silver nanoparticles, which were prepared under sunlight radiation, was carried out using transmission electron microscopy and infrared spectroscopy, respectively. Transmission electron microscopy images show spherical particles with an average size of 3.4 nm. Hydroxyl residues were also detected on the surface of these biogenic silver nanoparticles fabricated using plant extract of Andrachnea chordifolia under sunlight radiation. Our study on the reduction of silver ions by this plant extract in darkness shows that the synthesis process can take place under dark conditions at much longer incubations (48 hours). Larger silver polydispersed nanoparticles ranging in size from 3 to 30 nm were obtained when the silver ions were treated with the ethanol extract of Andrachnea chordifolia under dark conditions for 48 hours.