Nanoscale Broadband Viscoelastic Spectroscopy of Soft Materials Using Iterative Control

A novel approach to nanoscale broadband viscoelastic spectroscopy is presented. The proposed approach utilizes the recently developed modeling-free inversion-based iterative control (MIIC) technique to achieve accurate measurement of the material response to the applied excitation force over a broad frequency band. Scanning probe microscope (SPM) and nanoindenter have become enabling tools to quantitatively measure the mechanical properties of a wide variety of materials at nanoscale. Current nanomechanical measurement, however, is limited by the slow measurement speed: the nanomechanical measurement is slow and narrow-banded and thus not capable of measuring rate-dependent phenomena of materials. As a result, large measurement (temporal) errors are generated when material is undergoing dynamic evolution during the measurement. The low-speed operation of SPM is due to the inability of current approaches to (1) rapidly excite the broadband nanomechanical behavior of materials, and (2) compensate for the convolution of the hardware adverse effects with the material response during high-speed measurements. These adverse effects include the hysteresis of the piezo actuator (used to position the probe relative to the sample); the vibrational dynamics of the piezo actuator and the cantilever along with the related mechanical mounting; and the dynamics uncertainties caused by the probe variation and the operation condition. In the proposed approach, an input force signal with frequency characteristics of band-limited white-noise is utilized to rapidly excite the nanomechanical response of materials over a broad frequency range. The MIIC technique is used to compensate for the hardware adverse effects, thereby allowing the precise application of such an excitation force and measurement of the material response (to the applied force). The proposed approach is illustrated by implementing it to measure the frequency-dependent plane-strain modulus of poly(dimethylsiloxane) (PDMS) over a broad frequency range extending over 3 orders of magnitude (~1 Hz to 4.5 kHz).     

Soret and Dufour Effects on Double-Diffusive Free Convection Over a Vertical Truncated Cone in Porous Media with Variable Wall Heat and Mass Fluxes

This work studies the Soret and Dufour effects on the double-diffusive free convection over a downward-pointing vertical truncated cone with variable wall heat and mass fluxes in fluid-saturated porous media. A coordinate transformation is used to derive the nondimensional boundary-layer governing equations, and the obtained nonsimilar equations are then solved by the cubic spline collocation method. Results for local surface temperature and the local surface concentration are presented as functions of Soret parameters, Dufour parameters, power-law exponents, buoyancy ratios, and Lewis numbers. Results show that increasing the Dufour parameter tends to increase the local surface temperature, while it tends to decrease the local surface concentration. An increase in the Soret number leads to a decrease in the local surface temperature for buoyancy assisting flows, while it leads to an increase in the local surface temperature for buoyancy opposing flows. Increasing the Soret number tends to increase the local surface concentration. Moreover, the local surface temperature and the local surface concentration of the truncated cones with higher power-law exponents are lower than those with lower exponents.     

Study of Heat Transport in Bénard-Darcy Convection with g-Jitter and Thermo-Mechanical Anisotropy in Variable Viscosity Liquids

The effects of temperature-dependent viscosity, gravity modulation and thermo-mechanical anisotropies on heat transport in a low-porosity medium are studied using the Ginzburg–Landau model. The effect of gravity modulation is to decrease the Nusselt number, Nu and variable viscosity leads to increase in Nu. The thermo-mechanical anisotropies have opposite effect on Nu with thermal anisotropy decreasing the heat transport.     

A Note on the Legendre Series Solution of the Biharmonic Equation for Cylindrical Problems

The solution of cylindrical problems is addressed. A series solution is considered of the biharmonic equation, in which the series terms of the stress function Φ are expressions based upon Legendre polynomials and logarithmically singular functions. An explicit form of a polynomial supplementing each logarithmically singular part of the series solution is obtained.     

An Incompressible Fluid in a Weakly Deformable Shell. Part I: Analysis of the Model

We consider the flow of a viscous incompressible fluid in a pipe when the boundary is a deformable shell of Naghdi type. We prove that the corresponding system of partial differential equations has a solution when the deformation of the shell is smooth and small enough. We propose an algorithm that uncouples the unknowns and prove its convergence.     

Nonlinear analysis of laser droplet generation by means of 0–1 test for chaos

We apply the recently improved version of the 0–1 test for chaos to real experimental time series of laser droplet generation process. In particular two marginal regimes of dripping are considered: spontaneous and forced dripping. The outcomes of the test reveal that both spontaneous and forced dripping time series can be characterized as chaotic, which coincides with the previous analysis based on nonlinear time series analysis.     

北京自由电子激光最近进展──实现饱和振荡

北京自由电子激光(BFEL)装置于1993年底在10.68μm处实现了饱和振荡.输出激光能量为3mJ,饱和平顶宽度2μs.对应饱和振荡平均功率为210kW(宏脉冲),峰值功率约为20MW,比自发辐射高8个量级,单程小讯号净增益为24%,转换效率为0.45%,与理论预期结果相符.光束质量接近衍射极限.目前装置可工作于9-11μm.     

利用不完全自锁模激光研究C60的反饱和吸收效应

本文报道首次采用色心晶体的不完全自锁模激光（１０６４ｎｍ）对Ｃ６０分子反饱和吸收效应的研究，实验结果与采用平均过程的研究方法是一致的，文中还讨论了Ｃ６０分子反饱和吸收效应产生的原因。     

石油醚在流体静高压下的超声声速、衰减、密度和绝热压缩系数

 专门设计了用脉冲-回波-重合法在不同静水压下测量液体声速的装置，并对石油醚在0.1~650 MPa流体静压力范围内测量了其超声声速和衰减系数。还通过测量体积压缩量和质量得到石油醚密度ρ随流体静压力的变化。最后，给出了石油醚的绝热压缩系数β与流体静压力的关系。