Contact printing of arrayed microstructures

A novel contact printing method utilizing a sacrificial layer of polyacrylic acid (PAA) was developed to selectively modify the upper surfaces of arrayed microstructures. The method was characterized by printing polystyrene onto SU-8 microstructures to create an improved substrate for a cell-based microarray platform. Experiments measuring cell growth on SU-8 arrays modified with polystyrene and fibronectin demonstrated improved growth of NIH 3T3 (93% vs. 38%), HeLa (97% vs. 77%), and HT1080 (76% vs. 20%) cells relative to that for the previously used coating method. In addition, use of the PAA sacrificial layer permitted the printing of functionalized polystyrene, carboxylate polystyrene nanospheres, and silica nanospheres onto the arrays in a facile manner. Finally, a high concentration of extracellular matrix materials (ECM), such as collagen (5 mg/mL) and gelatin (0.1%), was contact-printed onto the array structures using as little as 5 μL of the ECM reagent and without the formation of a continuous film bridge across the microstructures. Murine embryonic stem cells cultured on arrays printed with this gelatin hydrogel remained in an undifferentiated state indicating an adequate surface gelatin layer to maintain these cells over time.     

High-pressure crystal structure of elastically isotropic CaTiO3 perovskite under hydrostatic and non-hydrostatic conditions

The structural evolution of orthorhombic CaTiO3 perovskite has been studied using high-pressure single-crystal x-ray diffraction under hydrostatic conditions up to 8.1 GPa and under a non-hydrostatic stress field formed in a diamond anvil cell (DAC) up to 4.7 GPa. Under hydrostatic conditions, the TiO6 octahedra become more tilted and distorted with increasing pressure, similar to other 2:4 perovskites. Under non-hydrostatic conditions, the experiments do not show any apparent difference in the internal structural variation from hydrostatic conditions and no additional tilts and distortions in the TiO6 octahedra are observed, even though the lattice itself becomes distorted due to the non-hydrostatic stress. The similarity between the hydrostatic and non-hydrostatic cases can be ascribed to the fact that CaTiO3 perovskite is nearly elastically isotropic and, as a consequence, its deviatoric unit-cell volume strain produced by the non-hydrostatic stress is very small; in other words, the additional octahedral tilts relevant to the extra unit-cell volume associated with the deviatoric unit-cell volume strain may be totally neglected. This study further addresses the role that three factors--the elastic properties, the crystal orientation and the pressure medium--have on the structural evolution of an orthorhombic perovskite loaded in a DAC under non-hydrostatic conditions. The influence of these factors can be clearly visualized by plotting the three-dimensional distribution of the deviatoric unit-cell volume strain in relation to the cylindrical axis of the DAC and indicates that, if the elasticity of a perovskite is nearly isotropic as it is for CaTiO3, the other two factors become relatively insignificant.     

Congruences for broken 3-diamond and 7 dots bracelet partitions

Andrews and Paule introduced broken k-diamond partitions by using MacMahon’s partition analysis. Later, Fu found a generalization which he called k dots bracelet partitions. In this paper, with the aid of Farkas and Kra’s partition theorem and a p-dissection identity of f(?q), we derive many congruences for broken 3-diamond partitions and 7 dots bracelet partitions.     

A Note on the Cops and Robber Game on Graphs Embedded in Non-Orientable Surfaces

We consider the two-player, complete information game of Cops and Robber played on undirected, finite, reflexive graphs. A number of cops and one robber are positioned on vertices and take turns in sliding along edges. The cops win if, after a move, a cop and the robber are on the same vertex. The minimum number of cops needed to catch the robber on a graph is called the cop number of that graph. Let c(g) be the supremum over all cop numbers of graphs embeddable in a closed orientable surface of genus g, and likewise ${\tilde c(g)}$ for non-orientable surfaces. It is known (Andreae, 1986) that, for a fixed surface, the maximum over all cop numbers of graphs embeddable in this surface is finite. More precisely, Quilliot (1985) showed that c(g) ≤ 2g + 3, and Schröder (2001) sharpened this to ${c(g)\le \frac32g + 3}$ . In his paper, Andreae gave the bound ${\tilde c(g) \in O(g)}$ with a weak constant, and posed the question whether a stronger bound can be obtained. Nowakowski & Schröder (1997) obtained ${\tilde c(g) \le 2g+1}$ . In this short note, we show ${\tilde c(g) \leq c(g-1)}$ , for any g ≥ 1. As a corollary, using Schröder’s results, we obtain the following: the maximum cop number of graphs embeddable in the projective plane is 3, the maximum cop number of graphs embeddable in the Klein Bottle is at most 4, ${\tilde c(3) \le 5}$ , and ${\tilde c(g) \le \frac32g + 3/2}$ for all other g.     

Characterization of anthocyanin extracts from maize kernels

The aim of the present work is to characterize the pigments present in the kernel of four native maize varieties related to the races Arrocillo, Cónico, Peruano, and Purepecha to determine their possible use as natural dyes. Total anthocyanin content is determined by a conventional spectrophotometric method, and anthocyanin analysis is done by high-performance liquid chromatography. The stability of the pigment at pH is also evaluated. The four maize samples contained anthocyanin in both the pericarp and aleurone layer. Total anthocyanin content among samples ranged from 54 mg/100 g of sample to 115 mg/100 g of sample. Anthocyanin profiles are almost the same among the four samples. Differences are observed only in the relative percentage of each anthocyanin. The anthocyanins identified are cyanidin-3-glucoside, pelargonidin- 3-glucoside, peonidin-3-glucoside, cyanidin-3-(6" malonylglucoside), and cyanidin-3-(3",6"-dimalonylglucoside). Anthocyanin extracts showed similar behavior in solutions with different pH. From pH 1-6 lambdamax values are maintained almost constant; however, above this pH value, a marked increase is observed in the bathochromic shifts, but the bluish color did not continue to change above pH 8.     

Single-cell sphingosine kinase activity measurements in primary leukemia

Sphingosine kinase (SK) is a promising therapeutic target in a number of cancers, including leukemia. Traditionally, SK has been measured in bulk cell lysates, but this technique obscures the cellular heterogeneity present in this pathway. For this reason, SK activity was measured in single cells loaded with a fluorescent sphingosine reporter. An automated capillary electrophoresis (CE) system enabled rapid separation and quantification of the phosphorylated and nonphosphorylated sphingosine reporter in single cells. SK activity was measured in tissue-cultured cells derived from chronic myelogenous leukemia (K562), primary peripheral blood mononuclear cells (PBMCs) from three patients with different forms of leukemia, and enriched leukemic blasts from a patient with acute myeloid leukemia (AML). Significant intercellular heterogeneity existed in terms of the degree of reporter phosphorylation (as much as an order of magnitude difference), the amount of reporter uptake, and the metabolites formed. In K562 cells, the average amount of reporter converted to the phosphorylated form was 39?±?26 % per cell. Of the primary PBMCs analyzed, the average amount of phosphorylated reporter was 16?±?25 %, 11?±?26 %, and 13?±?23 % in a chronic myelogenous leukemia (CML) patient, an AML patient, and a B-cell acute lymphocytic leukemia (B-ALL) patient, respectively. These experiments demonstrated the challenge of studying samples comprised of multiple cell types, with tumor blasts present at 5 to 87 % of the cell population. When the leukemic blasts from a fourth patient with AML were enriched to 99 % of the cell population, 19?±?36 % of the loaded sphingosine was phosphorylated. Thus, the diversity in SK activity remained even in a nearly pure tumor sample. These enriched AML blasts loaded significantly less reporter (0.12?±?0.2 amol) relative to that loaded into the PBMCs in the other samples (≥1 amol). The variability in SK signaling may have important implications for SK inhibitors as therapeutics for leukemia and demonstrates the value of single-cell analysis in characterizing the nature of oncogenic signaling in cancer. Figure

Phosphorylation of a fluorescent sphingosine kinase reporter was used to measure single-cell SK activity in primary cells from leukemic patients. Peripheral blood mononuclear cells as well as enriched leukemic blasts were analyzed.     

Monitoring hydration state conversion by TG-DTA

Characterization of the solid-state form (hydrate or polymorph) of a pharmaceutical active is a key scientific and regulatory requirement during development of and prior to seeking approval for marketing of the drug product. A variety of analytical methods are available to perform this task. By nature of the fundamental information it provides, TG-DTA offers advantages over other methods in regards to monitoring and quantitation of hydration state changes. In a single experiment with only a few milligrams of sample, TG-DTA perceives minor changes in phase, quantitates total water content and percent conversion, and illustrates hydrate type. All of this is accomplished without the necessity of generating time-consuming standard curves representing the differing ratios of hydrated to anhydrous forms. This study describes the use of TG-DTA to monitor and quantitate humidity induced solid–solid phase conversion of nitrofurantoin and risedronate. Percent conversion was qualitatively observed by both TG and DTA signals and quantitated by the TG.     

Association between the photodynamic loss of Bcl-2 and the sensitivity to apoptosis caused by phthalocyanine photodynamic therapy

We have reported that photodynamic therapy (PDT) using the photosensitizer phthalocyanine (Pc) 4 and red light damages the antiapoptotic protein Bcl-2. Recently, using transient transfection of Bcl-2 deletion mutants, we identified the membrane anchorage domains of Bcl-2 as necessary to form the photosensitive target. However, it is not clear how Bcl-2 photodamage sensitizes cells to Pc 4-PDT-induced apoptosis, whether overall cell killing is also sensitized or how up-regulation of Bcl-2 in tumors might make them more or less responsive to Pc 4-PDT. In this study we report on MCF-7c3 cells (human breast cancer cells expressing stably transfected procaspase-3) overexpressing wild-type Bcl-2 or certain deletion mutants in either a transient or a stable mode. By flow cytometric analysis of transiently transfected cells, we found that wild-type Bcl-2, Bcl-2delta33-54 and Bcl-2delta37-63 (each of which can be photodamaged) protected cells from apoptosis caused by Pc 4-PDT. In contrast, Bcl-2delta210-239, which lacks the C-terminal transmembrane domain and cannot be photodamaged, afforded no protection. We then evaluated the PDT sensitivity of transfected cell lines stably overexpressing high levels of wild-type Bcl-2 or one of the Bcl-2 mutants. Overexpression of wild-type Bcl-2, Bcl-2delta33-54 or Bcl-2delta37-63 resulted in relative resistance of cells to Pc 4-PDT, as assessed by morphological apoptosis or loss of clonogenicity. Furthermore, overexpression of Bcl-2 also inhibited the activation-associated conformational change of the proapoptotic protein Bax, and higher doses of Pc 4 and light were required to activate Bax in cells expressing high levels of Bcl-2. Many advanced cancer cells have elevated amounts of Bcl-2. Our results show that increasing the dose of Pc 4-PDT can overcome the resistance afforded by either Bcl-2 or the two mutants. PDT regimens that photodamage Bcl-2 lead to activation of Bax, induction of apoptosis and elimination of the otherwise resistant tumor cells.     

Laser-induced breakdown spectroscopy analysis of minerals: Carbonates and silicates

Laser-induced breakdown spectroscopy (LIBS) provides an alternative chemical analytical technique that obviates the issues of sample preparation and sample destruction common to most laboratory-based analytical methods. This contribution explores the capability of LIBS analysis to identify carbonate and silicate minerals rapidly and accurately. Fifty-two mineral samples (18 carbonates, 9 pyroxenes and pyroxenoids, 6 amphiboles, 8 phyllosilicates, and 11 feldspars) were analyzed by LIBS. Two composite broadband spectra (averages of 10 shots each) were calculated for each sample to produce two databases each containing the composite LIBS spectra for the same 52 mineral samples. By using correlation coefficients resulting from the regression of the intensities of pairs of LIBS spectra, all 52 minerals were correctly identified in the database. If the LIBS spectra of each sample were compared to a database containing the other 51 minerals, 65% were identified as a mineral of similar composition from the same mineral family. The remaining minerals were misidentified for two reasons: 1) the mineral had high concentrations of an element not present in the database; and 2) the mineral was identified as a mineral with similar elemental composition from a different family. For instance, the Ca–Mg carbonate dolomite was misidentified as the Ca–Mg silicate diopside. This pilot study suggests that LIBS has promise in mineral identification and in situ analysis of minerals that record geological processes.