采用BCB平整技术的高速850 nm垂直面发射激光器

垂直腔面发射激光器因其具有低阈值、低功耗、可实现高速调制等优势,广泛地应用于光通信和光互连等领域。寄生电容是影响激光器的调制带宽的主要因素之一。本文通过采用低k值的苯并环丁烯（BCB）平整技术有效地降低了垂直腔面发射激光器的寄生电容。详细研究了BCB平整技术的最优工艺参数,为未来高速垂直腔面发射激光器的制造技术提供参考。低k值BCB平整垂直腔面发射激光器在7 μm氧化孔径下3 dB小信号调制带宽可达15.2 GHz。     

硫酸根拉曼频移用于深海热液温度探测的方法探讨

作为一种典型的深海极端环境,热液区域不仅分布着各种硫化物矿产,而且孕育着特殊的生态群落,对热液流体理化性质的研究有助于深入了解热液的运动机制。激光拉曼光谱技术除了定性分析方面的优势外,已经被逐步用于定量分析,并且在原位探测中发挥了重要作用。该研究模拟了深海热液喷口流体的高温高压环境,探讨了水分子和硫酸根离子的拉曼光谱在热液流体温度探测中的应用价值。通过对水峰ν₁（H₂O）、硫酸根ν₁(SO2-₄)的拉曼频移与温度、离子浓度的关系进行研究,结果表明水峰ν₁（H₂O）和硫酸根ν₁(SO2-₄)的拉曼频移随温度表现出明显的变化,水峰ν₁（H₂O）的拉曼频移受流体硫酸根浓度的影响明显,因此不适用于硫酸根离子浓度变化明显的热液流体温度的测量。相比之下,ν₁(SO2-₄)的拉曼频移对流体硫酸根浓度和流体压力不敏感,为温度的反演提供了很好的依据。建立了ν₁(SO2-₄)的拉曼频移与温度的线性方程：Rν₁(SO2-₄)=-0.03T+980.69,其中,R2=0.998 6,可用于对深海热液喷口流体温度的原位探测等实际应用。     

平面镜演示实验仪器的研制和成像分析

阐述了平面镜演示实验仪器的设计与制作、使用方法及观察到的实验现象,并从光学成像的角度分析和探讨了相应的物理原理.     

表面增强拉曼光谱研究正己硫醇分子在银基底表面自组装过程的时间和浓度因素影响

表面增强拉曼光谱(SERS)是一种具有超灵敏检测能力的谱学技术,可以在单分子水平上检测分子结构的动态变化过程。烷基硫醇的自组装膜是一类典型的类晶态有序结构薄膜,在仿生、材料、电子和化学等领域有着重要的应用,越来越受到人们的关注。本文利用SERS对正己硫醇(hexanethiol,HT)分子在银基底上的吸附和组装过程进行研究,对HT的拉曼和自组装膜SERS光谱进行了指认。根据C-S,C-C和CH₃键结构的反式和旁式的特征光谱信息,研究HT吸附在银纳米粒子表面的构象,以及自组装膜结构的有序性。研究了吸附时间和浓度两个因素对成膜规律产生的影响。实验结果表明,当HT溶液浓度较高时,HT单层膜成膜速率较快,且有序性较好;当HT溶液浓度较低时,HT单层膜成膜速率较慢,且有序性较差。这一研究结果对成膜动力学以及烷基硫醇的有序单层膜的制备具有重要的指导意义,为基于烷基硫醇的自组装单层膜在防腐、器件和生物方面的应用奠定了基础。     

�����赲�ŵ���µ����������������о�

进行了介质阻挡放电低温等离子体脱除伴有SO2的烟气中NO的研究,分别进行了直接等离子体脱硫脱硝和间接等离子体脱硫脱硝实验.在直接等离子体脱硫脱硝中,模拟烟气等混合气直接通入等离子体发生器,在反应器中电离分解NO以及和生成的高能电子、离子和自由基等离子体相互反应而进行脱除NO;间接等离子体脱硫脱硝中,模拟烟气连接在等离子体发生器出口与从反应器中产生出的等离子体发生氧化反应而进行脱除NO.结果表明,无论直接形式还是间接形式,脱硝效率都要比脱硫效率高,间接脱硫脱硝能够大大降低功率输入,节省能耗,具有重要的实际应用价值和意义.氨气的加入,有利于脱除效率的提升.     

2,6-双(三甲基锡)-4,8-双(2-乙基己氧基)苯并[1,2-b∶4,5-b']二噻吩的合成与多核NMR研究

以苯并[1,2-b∶4,5-b´]二噻吩-4,8-二酮为原料合成了一种聚合物太阳能电池材料的单体2,6-双(三甲基锡)-4,8-双(2-乙基己氧基)苯并[1,2-b∶4,5-b´]二噻吩. 通过多核1D和2D NMR技术（包括1D ¹H、¹³C、¹¹⁹Sn、¹¹⁷Sn NMR、DEPT、选择性1D TOCSY及2D¹H-¹H COSY、gHSQC、gHMBC）表征了目标分子结构,完成了 ¹H、¹³C、¹¹⁹Sn 与¹¹⁷Sn NMR化学位移归属,并探讨了该化合物的NMR谱线特征.     

金属有机骨架材料-核酸适配体荧光法检测沙门氏菌

基于金属有机骨架材料(Uio-66-NH2)的荧光猝灭特性以及对核酸适配体的吸附性,结合核酸适配体的高亲和力与高特异性识别能力,构建了针对沙门氏菌检测的荧光生物传感器,当有荧光素修饰的沙门氏菌、适配体被材料吸附到表面时,由于材料诱导电子转移猝灭了荧光素的荧光,若溶液中存在沙门氏菌,则沙门氏菌与其适配体特异性结合后从材料表面脱附,材料与荧光素之间的电子转移过程被切断,荧光素的荧光恢复。基于此原理构建的荧光传感器的信号与沙门氏菌浓度的对数在101~105cfu/m L范围内呈良好的线性关系,检出限(S/N=3)为7 cfu/m L,将该方法用于虾肉样品中沙门氏菌的检测,加标回收率为90.0%~108.0%,该传感器对沙门氏菌有较好的选择性与灵敏度。     

Cascade reaction for 3-pyrrolines and pyrroles from nitroallylic acetates and N-mesyl 2-aminoethanones

Cascade reactions of nitroallylic acetates with methanesulfonyl 2-aminoethanones affords either the 3-pyrrolines or the pyrroles in one pot depending on reaction solvents and temperature. A possible mechanism for the entire sequence is proposed.     

Dynamics of the electromechanical sieve with hysteretic iron-core inductor

We study bifurcations and the chaotic behavior of a periodically forced electromechanical sieve. The dynamical behavior of the system is analyzed when supplied with the sinusoidal and square voltage sources. Analytical calculations and numerical simulations are also carried out for this electromechanical system and the results obtained are shown in terms of frequency–response diagrams, time–displacement diagrams, and phase portraits. Depending on the system parameters the analytical calculations and the numerical simulations exhibit regions of periodic and chaotic behaviors. For experimental validation, a small electromechanical sieve has been designed and realized. Amplitude jumps, hysteresis, and multistability are also observed. Good agreements are found between our theoretical results and experimental ones.

     

Bruch’s-Mimetic Nanofibrous Membranes Functionalized with the Integrin-Binding Peptides as a Promising Approach for Human Retinal Pigment Epithelium Cell Transplantation

Background: This study aimed to develop an ultrathin nanofibrous membrane able to, firstly, mimic the natural fibrous architecture of human Bruch’s membrane (BM) and, secondly, promote survival of retinal pigment epithelial (RPE) cells after surface functionalization of fibrous membranes. Methods: Integrin-binding peptides (IBPs) that specifically interact with appropriate adhesion receptors on RPEs were immobilized on Bruch’s-mimetic membranes to promote coverage of RPEs. Surface morphologies, Fourier-transform infrared spectroscopy spectra, contact angle analysis, Alamar Blue assay, live/dead assay, immunofluorescence staining, and scanning electron microscopy were used to evaluate the outcome. Results: Results showed that coated membranes maintained the original morphology of nanofibers. After coating with IBPs, the water contact angle of the membrane surfaces varied from 92.38 ± 0.67 degrees to 20.16 ± 0.81 degrees. RPE cells seeded on IBP-coated membranes showed the highest viability at all time points (Day 1, p < 0.05; Day 3, p < 0.01; Days 7 and 14, p < 0.001). The proliferation rate of RPE cells on uncoated poly(ε-caprolactone) (PCL) membranes was significantly lower than that of IBP-coated membranes (p < 0.001). SEM images showed a well-organized hexa/polygonal monolayer of RPE cells on IBP-coated membranes. RPE cells proliferated rapidly, contacted, and became confluent. RPE cells formed a tight adhesion with nanofibers under high-magnification SEM. Our findings confirmed that the IBP-coated PCL membrane improved the attachment, proliferation, and viability of RPE cells. In addition, in this study, we used serum-free culture for RPE cells and short IBPs without immunogenicity to prevent graft rejection and immunogenicity during transplantation. Conclusions: These results indicated that the biomimic BM-IBP-RPE nanofibrous graft might be a new, practicable approach to increase the success rate of RPE cell transplantation.