Improved Performance for Toluene Abatement in a Continuous-Flow Pulsed Sliding Discharge Reactor Based on Three-Electrode Configuration

Plasma Chemistry and Plasma Processing - The degradation of toluene by non-thermal plasma has been evaluated in a continuous-flow sliding dielectric barrier discharge (SLDBD) reactor based on...     

晶面可控BiOCl光催化剂的制备及其催化反应活性研究

以五水合硝酸铋和氯化钾为原料,通过水热法合成了BiOCl光催化剂,并对其结构进行表征,考察了前驱体的pH对催化剂结构和降解8-羟基喹啉活性的影响。结果表明,随前驱体pH的增加,催化剂[001]晶面暴露程度下降,带隙能减小,且催化反应活性降低,这可归因于低的带隙能和高的光生载流子复合效率。进一步考察降解体系pH对催化剂反应活性的影响,结果表明,降解体系pH影响8-羟基喹啉在催化剂表面的吸附行为,进而影响催化剂的反应活性。     

低相对分子质量有机酸对α-FeO(OH)吸附As(Ⅲ)的影响

制备并表征了α-FeO(OH),探究了4种低相对分子质量有机酸(LMW)对α-FeO(OH)吸附As(Ⅲ)的影响,并阐明了机理。 单一和混合LMW对α-FeO(OH)吸附As(Ⅲ)均有抑制作用,4种LMW的影响大小顺序为:草酸(OA)>柠檬酸(CA)>乳酸(LA)、水杨酸(SA)。 混合LMW的影响为:OA会加剧CA对α-FeO(OH)吸附As(Ⅲ)的影响,而SA几乎不起作用。 当ρ(As(Ⅲ))较低,LMW通过与α-FeO(OH)的静电引力、与α-FeO(OH)表面的铁离子形成配合物、生成沉淀从而影响α-FeO(OH)对As(Ⅲ)的吸附;当ρ(As(Ⅲ))较高,LMW还通过阻碍As(Ⅲ)在α-FeO(OH)上的扩散和沉淀作用产生影响。 实验结果为土壤中As(Ⅲ)的迁移转化、污染治理提供技术支撑。     

多孔硅/TiO2纳米线光阳极的制备及其光电催化性能

使用金属辅助化学刻蚀(MACE)法与水热法,改变贵金属粒子的刻蚀时间,制备不同n型多孔硅/TiO_2纳米线光阳极。通过扫描电镜(SEM)和X射线衍射仪(XRD)对光阳极样品进行表征,结果显示多孔硅宏孔的尺寸会随着刻蚀时间延长而增大,由0.1μm变化到0.4μm,多孔硅表面长有TiO_2纳米线为金红石相及少量锐钛矿相。测试结果显示刻蚀35 min的多孔硅/TiO_2样品具有最高的减反射率,在模拟太阳光下具有较高的光电流(光电流密度)活性,且在1.5 V外加偏压下具有最高的光电催化活性。这是由于刻蚀35 min的多孔硅基底具有优异的减反射性能,同时多孔硅与Ti O_2纳米线复合形成光阳极之后具有异质结效应和窗口效应,使得多孔硅/TiO_2纳米线光阳极具有优异光电化学性能。     

磷灰石结构荧光粉Ba10(PO4)6F2:Ce3+,Tb3+的合成、发光和能量传递

采用高温固相法合成了系列Ce~(3+)和Ce~(3+)/Tb~(3+)激活的具有磷灰石结构荧光粉Ba_(10)(PO_4)_6F_2。用X射线衍射(XRD)、扫描电镜(SEM)、激发和发射(PLE和PL)光谱对样品进行了表征分析。研究结果表明:所合成的荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)具有氟磷灰石结构,样品微观呈现不规则形貌。荧光粉Ba10-x(PO4)6F2∶x Ce~(3+)的相对发射强度随着x增加而增强,当x=0.09时,荧光强度达到最大。荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)的激发光谱为240～330 nm的宽带,发射光谱呈现出Ce~(3+)的5d→4f跃迁紫外光(335和358 nm)发射和Tb~(3+)的4f→4f跃迁绿光(542 nm)发射。光谱特性表明,发光过程中存在Ce~(3+)→Tb~(3+)能量传递,能量传递效率可以达到60%。计算Ce~(3+)和Tb~(3+)的临界距离为0.79 nm,能量传递机理是偶极-偶极交互作用。此外,详细论述了Ce~(3+)和Tb~(3+)之间的能量传递和发光的过程。通过调节Tb~(3+)的掺杂浓度,对荧光粉发光色坐标与Tb~(3+)的掺杂浓度之间的关系也进行了研究,随着Tb~(3+)的掺杂量从0增加0.52,荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)的发射光谱色坐标可以从(0.149 4,0.045 1)蓝色区变化到(0.280 1,0.585 3)绿色区。     

Handedness inversion of chiral mesoporous silica: A diffuse-reflectance circular dichroism study

Temperature-depended handedness inversion in chiral mesoporous silica was investigated by diffuse-reflectance circular dichroism spectra.     

化学优质课3C-FIAS常模的建立研究

以全国优质课评比的90节化学课为常模样本,建立化学优质课3C-FIAS教学行为变量常模,并验证了常模的适用性、科学性和实用性。此外,根据弗兰德斯特殊序对,建立了3C-FIAS特殊序对常模。     

Synergistic effects of mono-component intumescent flame retardant grafted with carbon black on flame retardancy and smoke suppression properties of epoxy resins

Journal of Thermal Analysis and Calorimetry - A mono-component intumescent flame retardant named pentaerythritol phosphate melamine salt (PPMS) was grafted on the surface of carbon black (CB) to...     

Hybrid Organic–Inorganic Thermoelectric Materials and Devices

Hybrid organic–inorganic materials have been considered as a new candidate in the field of thermoelectric materials since the last decade owing to their great potential to enhance the thermoelectric performance by utilizing the low thermal conductivity of organic materials and the high Seebeck coefficient, and high electrical conductivity of inorganic materials. Herein, we provide an overview of interfacial engineering in the synthesis of various organic–inorganic thermoelectric hybrid materials, along with the dimensional design for tuning their thermoelectric properties. Interfacial effects are examined in terms of nanostructures, physical properties, and chemical doping between the inorganic and organic components. Several key factors which dictate the thermoelectric efficiency and performance of various electronic devices are also discussed, such as the thermal conductivity, electric transportation, electronic band structures, and band convergence of the hybrid materials.