AN ACOUSTIC TRANSFORMER COMPOSED OF HORNS AND ITS APPLICATION

A new acoustic transformer was developed by connecting three horns to improve radiation performance in the frequency region below 500 Hz. The proposed acoustic transformer was evaluated by numerical analysis using the commercial computer program SYSNOISE and by experiment. The acoustic transformer is composed of three horns, one of which was used in an inverted form. A design model was developed by use of Webster's horn equation and showed that the transformer can improve radiation efficiency. This was confirmed by numerical calculation using SYSNOISE. An acoustic projector was designed by use of the developed transformer and a piezoelectric unimorph-type actuator. The sound pressure measured at the mouth of the constructed acoustic projector was compared with the sound pressures evaluated at the same location by numerical calculation to investigate the differences between the numerical simulation model and the actual acoustic projector. Sound pressures generated by several acoustic radiators were calculated numerically and compared with the measured and calculated sound pressures of the developed acoustic projector to evaluate the effects of use of the proposed acoustic transformer. The comparative evaluation shows that the proposed acoustic transformer can provide up to a 10 dB gain over use of a horn in the narrow band low-frequency region from 100 to 200 Hz.     

Optical modes in nanoscale one-dimensional spin chains

The spin chain systems with one-dimensional magnetic ordering are promising candidates for quantum optical devices. This paper shows how the optical excitation can induce various phonon modes in an ideal Cu-O chain at various lengths. The calculation was carried out at different level theories including configuration interaction singles for excited states, density functional theory and second-order Möller-Plesset perturbation. In general, the number of modes increases with chain length due to growing asymmetry of atomic positions when chain exceeds 5 nm. There were, however, only two basic modes: one is associated with the symmetric oscillation of oxygen and another with the asymmetric motion of the same along the chain. At the length below 4.3 nm, the Raman activity of the symmetric mode (440 cm⁻¹) dominates. From analysis of density of states, this mode may be associated with the excitation across the lowest LUMO bands with changing in spin state.     

Electron transfer behavior at polyoxometalate-adsorbed alkanethiol self-assembled monolayers

The interaction between polyoxometalate (POM) anions, SiMo₁₂O₄₀⁴⁻, and a self-assembled monolayer (SAM) of dodecanethiol (DT) on Au surfaces was investigated using electrochemical methods, X-ray photoelectron spectroscopy, and scanning probe microscopy. The SiMo₁₂O₄₀⁴⁻ ions adsorb on the SAM of DT on Au to form a composite organic-inorganic hybrid layer. The adsorbed SiMo₁₂O₄₀⁴⁻ ion on the SAM layer shows its characteristic redox waves with an electron transfer rate slower than that on a bare Au electrode. The electron transfer behavior at DT−SAM could be regulated by the adsorption of SiMo₁₂O₄₀⁴⁻ depending on the charge of the investigated electroactive species: a significant increase toward a positively charged Ru(NH₃)₆³⁺ ion, a moderate increase toward a neutral 1,1′-ferrocenedimethanol molecule and a slight decrease toward a negatively charged Fe(CN)₆³⁻ ion. The effect of the chain length of alkanethiols on the adsorption of SiMo₁₂O₄₀⁴⁻ ion was also investigated: as the chain length decreases, the amount of the adsorbed POM increases and the electron transfer rate through the composite layers increases. The nature of SiMo₁₂O₄₀⁴⁻ ions adsorbed on the SAMs of alkanethiols on Au is discussed in detail.     

Influence of Excitation Pulse Width on the Second-Order Correlation Functions of the Exciton-Biexciton Emissions

We investigate theoretically the population dynamics and the second-order correlation functions of photon emissions from the biexciton-exciton system of a single quantum dot with excitation from pulses to continuous wave. The dynamic equations of the correlation functions are deduced by applying quantum regression theorem to optical Bloch equations. The influences of excitation pulse width on the correlation function have been discussed in detail.     

Precipitate Contribution to the Acoustic Nonlinearity in Nickel-Based Superalloy

The influence of γ′ precipitate on the acoustic nonlinearity is investigated for a nickel-based superalloy, which is subjected to creep deformation. During creep deformation, the cuboidal γ′ precipitate is preferentially coarsened in a direction perpendicular to the applied stress axis. The length and shape factor of the γ′ precipitate increase with creep time. The increase of relative acoustic nonlinearity with increasing fraction of creep life is discussed in relation to the rafting of γ′ precipitate, which is closely related to the scattering and distortion of the acoustic wave     

MODAL ANALYSIS OF ROTATING COMPOSITE CANTILEVER PLATES

A modelling method for the modal analysis of a rotating composite cantilever plate is presented in this paper. A set of linear ordinary differential equations of motion for the plate is derived by using the assumed mode method. Two in-plane stretch variables are employed and approximated to derive the equations of motion. The equations of motion include the coupling terms between the in-plane and the lateral motions as well as the motion-induced stiffness variation terms. Dimensionless parameters are identified and the explicit mass and the stiffness matrices for the modal analysis are obtained with the dimensionless parameters. The effects of the dimensionless angular velocity and the fiber orientation angles of rotating composite cantilever plates on their modal characteristics are investigated. Natural frequency loci veering and crossing along with associated mode shape variations are observed.     

Dalitz analysis of D0-->K(0)(S)pi(+)pi(-)

In e(+)e(-) collisions using the CLEO detector, we have studied the decay of the D0 to the final state K(0)(S)pi(+)pi(-) with the initial flavor of the D0 tagged by the decay D(*+)-->D0pi(+). We use the Dalitz technique to measure the resonant substructure in this final state and clearly observe ten different contributions by fitting for their amplitudes and relative phases. We observe a K(*)(892)(+)pi(-) component which arises from doubly Cabibbo suppressed decays or D0-D0; mixing.     

Observation of B-->K(0)(S)pi(+)pi(-) and Evidence for B-->K(*+/-)pi(-/+)

We report on a search for charmless hadronic B decays to the three-body final states K(0)(S)h(+)pi(-), K(+)h(-)pi(0), K(0)(S)h(+)pi(0) (h(+/-) denotes a charged pion or kaon), and their charge conjugates, using 13.5 fb(-1) of integrated luminosity produced near sqrt[s]=10.6 GeV, and collected with the CLEO detector. We observe the decay B-->K0pi(+)pi(-) with a branching fraction (50(+10)(-9)(stat.)+/-7(syst.))x10(-6) and the decay B-->K(*+)(892)pi(-) with a branching fraction (16(+6)(-5)(stat.)+/-2(syst.))x10(-6).     

Synthesis of 5-aroylamino-3H-1,3,4-thiadiazole-2-thiones and their tautomerism

5-Aroylamino-3H-1,3,4-thiadiazole-2-thiones 2 have been synthesized by acylation of 5-amino-3H-1,3,4-thiadiazole-2-thione 1 . 5-Aroylamino-3H-1,3,4-thiadiazole-2-thiones can exist in two tautomeric forms — a thiol form and a thione form. On the basis of the ¹³C nmr spectra and additional experimental information, it has been established that the thione form is the stable form in which these compounds exist.