Surface Properties of Low Density Polyethylene upon Low-Temperature Plasma Treatment with Various Gases

The surface of a LDPE was modified by Ar, O₂, N₂, CO₂ gaseous plasma. The changes in surface morphology and surface wettability were investigated using AFM and SEM. The surface chemical changes of LDPE were also characterized by FTIR-ATR. The SEM and AFM results demonstrated variable changes in surface roughness for different types of plasma gas used, the changes being more for the Ar and N₂ plasma treatments. Considering the nature of the LDPE film, XRD studies were carried out to determine changes in the percentage crystalinity. The results showed that all low pressure O₂, Ar, N₂, CO₂ gas plasmas improved the wettability of LDPE films. Contact angles decreased significantly depending on the discharge powers and exposure times. Surface morphology was also found to vary with plasma discharge powers, exposure times, and the type of gas being used. Ar and N₂ gas plasmas in general produced more superior results.     

Biginelli reaction for synthesis of novel trifluoromethyl derivatives of bis(tetrahydropyrimidinone)benzenes

A facile one-pot three-component condensation of terephthalic aldehyde with urea and fluorinated 1,3-dicarbonyl derivatives is developed using catalytic quantities of chlorotrimethylsilane at ambient temperature. As a consequence, efficient synthesis of novel trifluoromethyl derivatives of bis(tetrahydropyrimidinone)benzenes is observed within short time periods. The procedure is shown to be equally efficient when urea is replaced with thiourea or guanidine.     

Synthesis and characterization of some Schiff-base-containing polyimides

The diamine, 4-aminophenyloxy-N-4-[(4-amiophenyloxy)benzylidene]aniline, was prepared via the nucleophilic substitution reaction and was polymerized with different dianhydrides either by one-step solution polymerization reaction or two-step procedure. The latter includes ring-opening polyaddition to give poly(amic acid), followed by cyclodehydration to polyimides. The inherent viscosity ranges from 0.61–0.79 dl/g. Some of the polymers were soluble in most of the organic solvents such as DMSO, DMF, DMAc, NMP, and m-cresol even at room temperature. The degradation temperature of the resultant polymers falls in the ranges from 240–500 °C in nitrogen with only 10% weight loss. Specific heat capacity at 200 °C ranges from 1.0929–2.6275 J g⁻¹ k⁻¹. The temperature at which the maximum degradation of the polymer occurs ranges from 600–630 °C. The glass transition temperature (Tg) values of the polyimides ranged from 185 to 272 °C. The activation energy and enthalpy of the polyimides ranged from 47.5–55.0 kJ/mole and 45.7–53.0 kJ/mole and the moisture absorption in the range of 0.23–0.72%.     

Effect of end group polarity upon the lower critical solution temperature of poly(2-isopropyl-2-oxazoline)

Thermo-sensitive poly(2-isopropyl-2-oxazoline)s (PiPrOx) were functionalized with end groups of different polarity by living cationic ring-opening polymerization using the initiator and/or termination method as well as sequential block copolymerization with 2-methyl-2-oxazoline. As end groups, methyl, n-nonyl, piperidine, piperazine as well as oligo(ethylenglygol) and oligo(2-methyl-2-oxazoline) were introduced quantitatively. The lower critical solution temperature (LCST) of the aqueous solutions was investigated. The introduction of hydrophobic end groups decreases the LCST, while hydrophilic polymer tails raise the cloud point. In comparison to poly(N-isopropyl acrylamide), the impact of the end group polarity upon the modulation of the LCST was found to be significantly stronger. Surprisingly, terminal oligoethylenegycol units also decrease the LCST of PiPrOx, thus acting as moieties of higher hydrophobicity as compared to the poly(2-oxazoline) main chain. Together with the possible variation of the side group polarity, this allows a broad modulation of the LCST of poly(2-oxazoline)s.     

Manganese porphyrins/mesoporous amberlyst 15 nanocomposites: Robust biomimetic catalysts for aqueous oxidation of olefins

In this study, the manganese complexes of N-methylated meso-tetra(2-, 3-, or 4 pyridyl)porphyrins, immobilized into the pores of the sodium salt of mesoporous amberlyst 15 nanoparticles (nanoAmbSO₃Na), nanoAmbSO₃@MnT(2-MePy)P (OAc), nanoAmbSO₃@MnT(3-MePy)P (OAc), and nanoAmbSO₃@MnT(4-MePy)P (OAc), were synthesized and characterized by field-emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), thermal gravimetric analysis (TGA), nitrogen adsorption/desorption porosimetry analysis, and diffuse reflectance UV–vis spectroscopy. FESEM images revealed a particle size less than ~40 nm for the nanocomposites. The results of BET are in accord with the occupation of the larger pores of the polymer matrix in the case of MnT(2-MePy)P (OAc) as the most sterically demanding metalloporphyrin of the series, and the smaller pores in the case of the other ones. The immobilized manganese porphyrins were used as catalysts for the oxidation of olefins with sodium periodate in the presence of imidazole (ImH) as the co-catalyst. The negligible oxidative destructions of the immobilized manganese porphyrins under the oxidative conditions allowed the comparison of the inherent catalytic activity of the metalloporphyrins, decreased as nanoAmbSO₃@MnT(4-MePy)P (OAc) > nanoAmbSO₃@MnT(3-MePy)P (OAc) ≫ nanoAmbSO₃@MnT(2-MePy)P (OAc). Contrary to the general belief that electron-deficient metalloporphyrins are more efficient catalysts than the electron-rich ones, the most electron-deficient metalloporphyrin of the series, that is, nanoAmbSO₃@MnT(2-MePy)P (OAc), showed the lowest catalytic activity. Due to the high oxidative stability of the immobilized manganese porphyrins, ring opening of epoxide competes with the epoxidation reaction to decrease the yield of epoxide at longer reaction times than the optimized one.     

Synthesis of 2D Germanane (GeH): a New,Fast, and Facile Approach

Germanane (GeH), a germanium analogue of graphane, has recently attracted considerable interest because its remarkable combination of properties makes it an extremely suitable candidate to be used as 2D material for field effect devices, photovoltaics, and photocatalysis. Up to now, the synthesis of GeH has been conducted by substituting Ca by H in a β‐CaGe₂ layered Zintl phase through topochemical deintercalation in aqueous HCl. This reaction is generally slow and takes place over 6 to 14 days. The new and facile protocol presented here allows to synthesize GeH at room temperature in a significantly shorter time (a few minutes), which renders this method highly attractive for technological applications. The GeH produced with this method is highly pure and has a band gap (E_g) close to 1.4 eV, a lower value than that reported for germanane synthesized using HCl, which is promising for incorporation of GeH in solar cells.     

Selective extraction of apixaban from plasma by dispersive solid-phase microextraction using magnetic metal organic framework combined with molecularly imprinted polymer nanocomposite

This research aims to synthesize a specific and efficient sorbent to use in the extraction of apixaban from human plasma samples and its determination by high-performance liquid chromatography-tandem mass spectrometry. High specific surface area of metal-organic framework, magnetic property of iron oxide nanoparticles, selectively of molecular imprinted polymer toward the analyte, and the combination of dispersive solid-phase extraction method with a sensitive analysis system provided an efficient analytical method. In this study, first, a molecularly imprinted polymer combined with magnetic metal organic framework nanocomposite was prepared and then characterized using different techniques. Then the sorbent particles were used for selective extraction of the analyte from plasma samples. The efficiency of the method was improved by optimizing effective parameters. According to the validation results, wide linear range (1.02–200 ng mL⁻¹), acceptable coefficient of determination (0.9938), low limit of detection (0.32 ng mL⁻¹) and limit of quantification (1.02 ng mL⁻¹), high extraction recovery (78%), and good precision (relative standard deviations ≤ 2.9% for intra- (n = 6) and interday (n = 6) precisions) were obtainable using the proposed method. These outcomes showed the high potential of the proposed method for screening apixaban in the human plasma samples.     

Phytochemical Profiling,In Vitro Biological Activities,and In Silico Molecular Docking Studies of Dracaena reflexa

Dracaena reflexa, a traditionally significant medicinal plant, has not been extensively explored before for its phytochemical and biological potential. The present study was conducted to evaluate the bioactive phytochemicals and in vitro biological activities of D. reflexa, and perform in silico molecular docking validation of D. reflexa. The bioactive phytochemicals were assessed by preliminary phytochemical testing, total bioactive contents, and GC-MS analysis. For biological evaluation, the antioxidant (DPPH, ABTS, CUPRAC, and ABTS), antibacterial, thrombolytic, and enzyme inhibition (tyrosinase and cholinesterase enzymes) potential were determined. The highest level of total phenolic contents (92.72 ± 0.79 mg GAE/g extract) was found in the n-butanol fraction while the maximum total flavonoid content (110 ± 0.83 mg QE/g extract) was observed in methanolic extract. The results showed that n-butanol fraction exhibited very significant tyrosinase inhibition activity (73.46 ± 0.80) and acetylcholinesterase inhibition activity (64.06 ± 2.65%) as compared to other fractions and comparable to the standard compounds (kojic acid and galantamine). The methanolic extract was considered to have moderate butyrylcholinesterase inhibition activity (50.97 ± 063) as compared to the standard compound galantamine (53.671 ± 0.97%). The GC-MS analysis of the n-hexane fraction resulted in the tentative identification of 120 bioactive phytochemicals. Furthermore, the major compounds as identified by GC-MS were analyzed using in silico molecular docking studies to determine the binding affinity between the ligands and the enzymes (tyrosinase, acetylcholinesterase, and butyrylcholinesterase enzymes). The results of this study suggest that Dracaena reflexa has unquestionable pharmaceutical importance and it should be further explored for the isolation of secondary metabolites that can be employed for the treatment of different diseases.     

Is Genetic Engineering a Route to Enhance Microalgae-Mediated Bioremediation of Heavy Metal-Containing Effluents?

Contamination of the biosphere by heavy metals has been rising, due to accelerated anthropogenic activities, and is nowadays, a matter of serious global concern. Removal of such inorganic pollutants from aquatic environments via biological processes has earned great popularity, for its cost-effectiveness and high efficiency, compared to conventional physicochemical methods. Among candidate organisms, microalgae offer several competitive advantages; phycoremediation has even been claimed as the next generation of wastewater treatment technologies. Furthermore, integration of microalgae-mediated wastewater treatment and bioenergy production adds favorably to the economic feasibility of the former process—with energy security coming along with environmental sustainability. However, poor biomass productivity under abiotic stress conditions has hindered the large-scale deployment of microalgae. Recent advances encompassing molecular tools for genome editing, together with the advent of multiomics technologies and computational approaches, have permitted the design of tailor-made microalgal cell factories, which encompass multiple beneficial traits, while circumventing those associated with the bioaccumulation of unfavorable chemicals. Previous studies unfolded several routes through which genetic engineering-mediated improvements appear feasible (encompassing sequestration/uptake capacity and specificity for heavy metals); they can be categorized as metal transportation, chelation, or biotransformation, with regulation of metal- and oxidative stress response, as well as cell surface engineering playing a crucial role therein. This review covers the state-of-the-art metal stress mitigation mechanisms prevalent in microalgae, and discusses putative and tested metabolic engineering approaches, aimed at further improvement of those biological processes. Finally, current research gaps and future prospects arising from use of transgenic microalgae for heavy metal phycoremediation are reviewed.     

Purification, characterization, kinetic properties, and thermal behavior of extracellular polygalacturonase produced by filamentous fungus Tetracoccosporium sp

For the first time, a polygalacturonase from the culture broth of Tetracoccosporium sp. was isolated and incubated at 30°C in an orbital shaker at 160 rpm for 48h. The enzyme was purified by ammonium sulfate precipitation and two-step ion-exchange chromatography and had an apparent molecular mass of 36 kDa, as shown by sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis. Its optimum activity was at pH 4.3 and 40°C, and the K _m and V _max values of this enzyme (for polygalacturonic acid) were 3.23 mg/mL and 0.15 μmol/min, respectively. Ag⁺, Co²⁺, EDTA, Tween-20, Tween-80, and Triton X-100 stimulated polygalacturonase activity whereas Al³⁺, Ba²⁺, Ca²⁺, Fe²⁺, Fe³⁺, Ni²⁺, Mg²⁺, Mn²⁺, and SDS inhibited it. In addition, iodoacetamide and iodoacetic acid did not inhibit enzyme activity at a concentration of 1 mM, indicating that cysteine residues are not part of the catalytic site of polygalacturonase. We studied the kinetic properties and thermal inactivation of polygalacturonase. This enzyme exhibited a t _1/2 of 63 min at 60°C and its specific activity, turnover number, and catalytic efficiency were 6.17 U/mg, 113.64 min⁻¹, and 35.18 mL/(min·mg), respectively. The activation energy (ΔE ^#) for heat inactivation was 5.341 kJ/mol, and the thermodynamic activation parameters ΔG ^#, ΔH ^#, and ΔS ^# were also calculated, revealing a potential application for the industry.