Radical copolymerization of citraconic acid with styrene in dioxane solution

Styrene and citraconic acid (CA) were copolymerized in the dioxane solution ranging mole fraction of CA in feed from 0.1 to 0.9 at 70 °C. The terminal and penultimate models were used to fit the copolymer composition equation. Curve fitting, Mayo-Lewis, Joshi-Joshi, Fineman-Ross, Ezrielev-Brokhina-Roskin, Kellen-Tüd?s methods were used to solve the copolymer equation in terminal model. Besides these methods Solver in Excel 97 was used to solve copolymer equation in terminal and penultimate models of copolymerization. Experimental mole fractions of CA and those predicted from both models are agreed within the precision of the method used for the copolymer analysis, so the copolymer composition does not permit a definite choice of the adequate copolymerization model.     

Determination of nitrite as pentafluorobenzyl derivative by RP-HPLC and UV detection with and without ion-pair extraction

Summary A reversed-phase high-performance liquid chromatographic (RP-HPLC) method with UV detection (270 nm) for the determination of nitrite as its pentafluorobenzyl derivative with and without ion-pair extraction is described. Ion-pair extraction of nitrite from aqueous solutions was performed by using a 1 mol/l solution of the liquid ion exchanger methyltrioctylammonium chloride in toluene. The residue of the ion-pair extraction or an aliquot of an aqueous nitrite solution or of a biological fluid (100 l) were treated with 400 l of acetone and 10 l of pentafluorobenzyl bromide. Nitrite was converted into its pentafluorobenzyl derivative by heating at 50°C for 90 min. After evaporation of acetone the aqueous phases were diluted with 100 to 400 l of methanol, and up to 100 l were injected into the RP-HPLC system. The method allows accurate analysis of nitrite in the presence of nitrate directly in aqueous solutions and biological fluids in concentrations down to 2.0 mg/l. The method is also applicable to the determination of nitrate following its reduction to nitrite by cadmium.     

A new convenient synthesis of N-acyl-2-(dimethoxyphosphoryl)glycinates

Easily accessible N-acyl-2-triphenylphosphonioglycinate tetrafluoroborates react smoothly with trimethylphosphite in the presence of methyltriphenylphosphonium iodide to give N-acyl-2-(dimethoxyphosphoryl)glycinates in good or very good yields. The dimethoxyphosphorylglycinates may be isolated by column chromatography, or used directly for the Wadsworth-Emmons synthesis of α,β-dehydro-α-amino acids in a one-pot procedure without purification.     

Influence of nonionic emulsifier included inside carboxylated polymer particles on the formation of multihollow structure by the alkali/cooling method

The influence of nonionic emulsifier, included inside styrene-methacrylic acid copolymer [P(S-MAA)] particles during emulsion copolymerization, on the formation of multihollow structure inside the particles via the alkali/cooling method (proposed by the authors) was examined in comparison to emulsifier-free particles. It was clarified that the nonionic emulsifier included inside the P(S-MAA) particles eased the formation of multihollow structure.Part CCL of the series studies on suspension and emulsion     

Determination of organotin compounds in biological samples using accelerated solvent extraction,sodium tetraethylborate ethylation,and multicapillary gas chromatography–flame photometric detection

A method has been developed for species-selective analysis of organotin compounds in solid, biological samples. The procedure is based on accelerated solvent extraction (ASE) of analytes and includes extraction of the tin species with a methanol–water (90% methanol) solution of acetic acid/sodium acetate containing tropolone (0.03% w/v), their ethylation with NaBEt₄, and separation and detection by GC–FPD. The analytical procedure was optimized with an unspiked sample of harbor porpoise (Phocoena phocoena) liver. Effects of ASE operational variables (extraction temperature and pressure, solvent composition, number of static extraction steps) are discussed. Method detection limits (MDL) were in the range 6–10 ng(Sn) g^–1 dry weight and 7–17 ng(Sn) g^–1 dry weight for butyl- and phenyltin compounds, respectively. Recoveries were comparable with or better than those obtained by use of other procedures reported in the literature. The analytical procedure was validated by analysis of NIES No. 11 (fish tissue) certified reference material.     

Own N-layered integrated molecular orbital and molecular mechanics study of the reaction of OH<Superscript>−</Superscript> with polychlorinated hydrocarbons CH<Subscript>(4−n)</Subscript>Cl<Subscript>n</Subscript> (n=2–4)

The reliability of the two-layer own N-layered integrated molecular orbital and molecular mechanics (ONIOM) method was examined for the S_N2 reaction CH_(4–n)Cl_n+OH^–. In the ONIOM calculation, only the methyl chloride and OH^–were treated at a high level and the effect of polychlorination was taken into account only at a low level. The ONIOM results were compared with the target CCSD(T)/aug-cc-pVDZ//MP2/aug-cc-pVDZ results obtained by Borisov etal. [(2001) J. Phys. Chem. A 105:7724]. The ONIOM[MP2/aug-cc-pVDZ:B3LYP/6-31+G(d)] was found to reproduce well the target geometry and energy at the MP2/aug-cc-pVDZ level. The single-point improved energetics at the ONIOM[CCSD(T)/aug-cc-pVDZ:MP2/6-31+G(d)] is found to give results nearly as accurate as the target CCSD(T)/aug-cc-pVDZ//MP2/aug-cc-pVDZ results. The substantially reduced cost, 20% for optimization and 5% for single-point improved energy of the target cost for n=4, as well as small errors suggest that ONIOM is a powerful tool for accurate potential-energy surfaces of the reaction of large polyhalohydrocarbons.     

A new and versatile Ugi/SNAr synthesis of fused 4,5-dihydrotetrazolo[1,5-a]quinoxalines

A combinatorial synthetic route yielding fused tetrazolo[1,5-a]quinoxalines is described. The use of 2-fluorophenylisocyanide in the Ugi-tetrazole reaction (tetrazole-U-4CR) followed by a nucleophilic aromatic substitution (S_NAr) affords the tricylic tetrazolo[1,5-a]quinoxaline moiety in good yields and with high diversity.     

Unusual volumetric and hydration behavior of the catanionic system sodium undecenoate: sodecyltrimethylammonium bromide

Following the studies on the effect of double bonds in the surfactant hydrophobic tail on the formation of mixed surfactant aggregates, we studied the viscosity and density of the system Sodium 10-undecenoate (SUD)–decyltrimethylammonium bromide (DTAB)–water. We found that the partial molar volume (pmv) and intrinsic viscosity of both, micellised and unmicellised mixtures, are non-ideal, dependent on the mixture composition and related to structural changes in micelles. These phenomena are caused by the presence of the double bond at the distal extreme of the SUD molecule, which has some affinity with water by formation of hydrogen bonds. In particular, as far as we know, this is the first report on non-ideal behavior of the pmv in mixed micelles.     

The aqueous cationic system sodium undecenoate-dodecyltrimethylammonium bromide at low concentration

The aqueous sodium undecenoate (SUD) –dodecyltrimethylammonium bromide (DTAB) catanionic system was studied at low concentration. The system did not precipitate, even at a 1:1 SUD:DTAB proportion, but showed the formation of a coacervate in a range of surfactant mixture compositions. Micelles have a preferential composition of 0.37 mole fraction of SUD. This behavior is attributed to the presence of the double bond at the distal extreme of the SUD molecule, which can form hydrogen bonds with water. Consequently, the –CH=CH₂ group is situated at the interface between the hydrocarbon micelle core and water, reducing the interfacial free energy. Structural computations demonstrate that the mentioned SUD proportion produces complete coverage of the micelle surface by the double bonds.     

Substituent-dependent reactivity in the photodimerization of N-substituted dibenz[b,f]azepines

The photoprocesses of a series of N-substituted dibenz[b,f]azepines (iminostilbenes) were studied by absorption and emission spectroscopy, by laser flash photolysis, and by preparative irradiation with NMR analysis. In solutions, 2pi+2pi photodimers of N-cyano and N-acyl dibenzazepines are formed via the triplet state upon acetone- or benzophenone-sensitized energy transfer. T-T absorption spectra were measured and absorption coefficients were determined. The triplet energy transfer is equally efficient for N-alkyl dibenzazepines, which do not dimerize. Excited states of npi* character in the latter cases are discussed to rationalize the different reactivities. In spite of negligible intersystem crossing of 21 dibenzazepine derivatives, photodimers of N-acyl and N-cyano dibenzazepines are formed upon direct excitation in concentrated solutions (0.01-0.1 mol dm(-3)) as well as in the solid state. A selective anti-configuration of the photodimers was found throughout.