Dual‐Amplification of Antigen–Antibody Interactions via Backfilling Gold Nanoparticles on (3‐Mercaptopropyl) Trimethoxysilane Sol‐Gel Functionalized Interface

A new dual‐amplification strategy of electrochemical signaling from antigen–antibody interactions was proposed via backfilling gold nanoparticles on (3‐mercaptopropyl) trimethoxysilane sol‐gel (MPTS) functionalized interface. The MPTS was employed not only as a building block for the electrode surface modification but also as a matrix for ligand functionalization with first amplification. The second signal amplification strategy introduced in this study was based on the backfilling immobilization of nanogold particles to the immunosensor surface. Several coupling techniques, such as with nanogold but not MPTS or with MPTS but not nanogold, were investigated for the determination of carcinoembryonic antigen (CEA) as a model, and a very good result was obtained with nanogold and MPTS coupling immunosensor. With the noncompetitive format, the formation of the antigen–antibody complex by a simple one‐step immunoreaction between the immobilized anti‐CEA and CEA in sample solution introduced membrane potential change before and after the antigen–antibody interaction. Under optimal conditions, the proposed immunosensor exhibited a good electrochemical behavior to CEA in a dynamic concentration range of 4.4 to 85.7 ng/mL with a detection limit of 1.2 ng/mL (at 3 δ). Moreover, the precision, reproducibility and stability of the as‐prepared immunosensor were acceptable. Importantly, the proposed methodology would be valuable for diagnosis and monitoring of carcinoma and its metastasis.     

Single-site mutation and secondary structure stability: an isodesmic reaction approach. The case of unnatural amino acid mutagenesis Ala-->Lac

A method is described to evaluate backbone interactions in proteins via computational unnatural amino acid mutagenesis. Several N-acetyl polyalanyl amides (AcA(n)NH(2)) were optimized in the representative helical (3(10)-, 4(13)-, and a "hybrid" kappa-helix, n = 7, 9, 10, 14) and hairpin (two- and three-stranded antiparallel beta-sheets with type I turns betaalphaalphaepsilon, n = 6, 9, 10) conformations, and extended conformers of N-acetyl polyalanyl methylamides (n = 2, 3) were used to derive multistranded beta-sheet fragments. Subsequently, each residue of every model structure was substituted, one at a time, with l-lactic acid. The resulting mutant structures were again optimized, and group-transfer energies DeltaE(GT) were obtained as heats of the isodesmic reactions: AcA(n)NHR + AcOMe --> AcA(x)LacA(y)NHR + AcNHMe (R = H, CH(3)). These group-transfer energies correlate with the degree of charge polarization of the substituted peptide linkages as measured by the difference Deltae in H and O Mulliken populations in HN-C=O and with the H-bond distances in the "wild-type" structures. A good correlation obtains for the HF/3-21G and B3LYP/6-31G* group-transfer energies. The destabilization effects are interpreted in terms of loss of interstrand and intrastrand H-bonds, decrease in Lewis basicity of the C=O group, and O...O repulsion. On the basis of several comparisons of Ala --> Lac DeltaE(GT)'s with heats of the NH --> CH(2) substitutions, the latter contribution is estimated (B3LYP/6-31G*) to range between 1.5 and 2.4 kcal mol(-1), a figure close to the recent experimental DeltaDeltaG(o) value of 2.6 kcal mol(-1) (McComas, C. C.; Crowley, B. M.; Boger, D. L. J. Am.Chem. Soc. 2003, 125, 9314). The partitioning yields the following maximum values of the electronic association energy of H-bonds in the examined sample of model structures (B3LYP/6-31G* estimates): 3(10)-helix D(e) = -1.7 kcal mol(-1), alpha-helix D(e) = -3.8 kcal mol(-1), beta-sheet D(e) = -6.1 kcal mol(-1). The premise of experimental evaluations of the backbone-backbone H-bonding that Ala --> Lac substitution in proteins is isosteric (e.g., Koh, J. T.; Cornish, V. W.; Schultz, P. G. Biochemistry 1997, 36, 11314) is often but not always corroborated. Examination of the integrity of H-bonding pattern and phi(i), psi(i) distribution identified several mutants with significant distortions of the "wild-type" structure resulting inter alia from the transitions between i, i + 3 and i, i + 4 H-bonding in helices, observed previously in the crystallographic studies of depsipeptides (Ohyama, T.; Oku, H.; Hiroki, A.; Maekawa, Y.; Yoshida, M.; Katakai, R. Biopolymers 2000, 54, 375; Karle, I. L.; Das, C.; Balaram, P. Biopolymers 2001, 59, 276). Thus, the isodesmic reaction approach provides a simple way to gauge how conformation of the polypeptide chain and dimensions of the H-bonding network affect the strength of backbone-backbone C=O...HN bonds. The results indicate that the stabilization provided by such interactions increases on going from 3(10)-helix to alpha-helix to beta-sheet.     

The use of bathoferroine for extraction-spectrophotometric determinations of microamounts of perchlorate and perrhenate

Bathoferroine can be used for anion determinations by a method based on selective ion-pair extraction if the selectivity of extraction has been enhanced by addition of nonelectrolyte to the water phase. The method of perchlorate and perrhenate determinations characterizes parameters similar to those obtained by methods in which other cation complexes have been used. The advantage of the proposed method is the possibility of considerable concentration of ion association compound extracts by nitromethane reextraction.     

Effect of additives on the stereochemical integrity and reactivity of alpha-alkoxycarbonyl alkenylcopper intermediates. Optimal conditions for the synthesis of isomerically pure tetrasubstituted alkenes

A systematic study on the effect of additives on the isomerizability of 1-alkoxycarbonyl alkenylcopper(I) intermediates revealed that the lithium chelator 12-crown-4 is significantly more efficient than HMPA at retarding isomerization. On the other hand, 12-crown-4 alone is unable to promote effective coupling with alkyl halides. The combination of 12-crown-4 and a reduced amount of HMPA, however, led to an improved procedure for the preparation of useful, isomerically pure tetrasubstituted alkenes such as allylation reagents and skipped dienes.     

Ab initio potential energy surface, variational transition state theory, and quasiclassical trajectory studies of the F+CH4-->HF+CH3 reaction

In this work we present a study of the F+CH(4)-->HF+CH(3) reaction (DeltaHdegrees(298 K)=-32.0 kcal mol(-1)) using different methods of the chemical reaction theory. The ground potential energy surface (PES) is characterized using several ab initio methods. Full-dimensional rate constants have been calculated employing the variational transition state theory and using directly ab initio data. A triatomic analytical representation of the ground PES was derived from ab initio points calculated at the second- and fourth-order M?ller-Plesset levels with the 6-311+G(2df,2pd) basis set, assuming the CH(3) fragment to be a 15 a.m.u. pseudoatom in the fitting process. This is suggested from experiments that indicate that the methyl group is uncoupled to the reaction coordinate. A dynamics study by means of the quasiclassical trajectory (QCT) method and employing this analytical surface was also carried out. The experimental data available on the HF internal states distributions are reproduced by the QCT results. Very recent experimental information about the reaction stereodynamics is also borne out by our QCT calculations. Comparisons with the benchmark F+H(2) and analogous Cl+CH(4) reactions are established throughout.     

Synthetic enantiopure aziridinomitosenes: preparation, reactivity, and DNA alkylation studies

An enantiocontrolled route to aziridinomitosenes had been developed from l-serine methyl ester hydrochloride. The tetracyclic target ring system was assembled by an internal azomethine ylide cycloaddition reaction based on silver ion-assisted intramolecular oxazole alkylation and cyanide-induced ylide generation via a labile oxazoline intermediate (62 to 66). Other key steps include reductive detritylation of 26, methylation of the N-H aziridine 56, oxidation of the sensitive cyclohexenedione 68 to quinone 70, and carbamoylation using Fmoc-NCO. Although the aziridinomitosene tetracycle is sensitive, a range of protecting group manipulations and redox chemistry can be performed if suitable precautions are taken. A study of DNA alkylation by the first C-6,C-7-unsubstituted aziridinomitosene 11a has been carried out, and evidence for DNA cross-link formation involving nucleophilic addition to the quinone subunit is described.     

Copper‐Bismuth Bimetallic Microspheres for Selective Electrocatalytic Reduction of CO2 to Formate

Electrocatalytic carbon dioxide reduction holds great promise for reducing the atmospheric CO₂ level and alleviating the energy crisis. High‐performance electrocatalysts are often required in order to lower the high overpotential and expedite the sluggish reaction kinetics of CO₂ electroreduction. Copper is a promising candidate metal. However, it usually suffers from the issues of poor stability and low product selectivity. In this work, bimetallic Cu‐Bi is obtained by reducing the microspherical copper bismuthate (CuBi₂O₄) for selectively catalyzing the CO₂ reduction to formate (HCOO^–). The bimetallic Cu‐Bi electrocatalyst exhibits high activity and selectivity with the Faradic efficiency over 90% in a wide potential window. A maximum Faradaic efficiency of ~95% is obtained at –0.93 V versus reversible hydrogen electrode. Furthermore, the catalyst shows high stability over 6 h with Faradaic efficiency of ~95%. This study provides an important clue in designing new functional materials for CO₂ electroreduction with high activity and selectivity.     

Plasma quantification of quazepam and its 2-oxo and N-desmethyl metabolites by capillary gas chromatography

The authors have developed a gas chromatographic method for the simultaneous quantification of quazepam in plasma and its two main metabolites, 2-oxoquazepam and N-desmethylquazepam. This method involves an extraction from plasma using butyl acetate, and an analysis by electron-capture detection on a CP-Sil 5 WSCOT capillary column. Intra- and inter-day precision and accuracy were better than 10% for each of these three compounds, even near their detection limit estimated at 0.2 ng/ml. Linearity proved satisfactory between 0.2 and 60-70 ng/ml. For endogenous plasma components, adequate specificity was achieved. Despite some inconveniences, a long analysis time, a progressive saturation of the column owing to a low oven temperature, and a relatively short life-span of the CP-Sil 5 columns, this method was the only one available in the literature for the quantification of quazepam and its metabolites from the same plasma sample. It was successfully applied to phase I studies in healthy volunteers.     

Ruthenium‐catalyzed formal alkyl group transfer: Synthesis of quinolines from nitroarenes and alkylammonium halides

Nitroarenes are reductively cyclized with an array of tetraalkylammonium halides and trialkylarnmonium chlorides in the presence of a catalytic amount of a ruthenium catalyst along with tin(II) chloride dihydrate at 180° to afford the corresponding quinolines in moderate to good yields. The addition of tin(II) chloride dihydrate is necessary for the effective formation of quinolines and toluene is the solvent of choice. A reaction pathway involving initial reduction of nitroarenes to anilines and conversion of alkylammonium halides to alkylamines, alkyl group transfer from alkylamines to anilines to form an imine, dimerization of imine, and heteroannulation is proposed for this catalytic process.     

Biocompatible hydrogels based on chitosan,cellulose/starch,PVA and PEDOT:PSS with high flexibility and high mechanical strength

Fabricating mechanically strong hydrogels that can withstand the conditions in internal tissues is a challenging task. We have designed hydrogels based on multicomponent systems by combining chitosan, starch/cellulose, PVA, and PEDOT:PSS via one-pot synthesis. The starch-based hydrogels were homogeneous, while the cellulose-based hydrogels showed the presence of cellulose micro- and nanofibers. The cellulose-based hydrogels demonstrated a swelling ratio between 121 and 156%, while the starch-based hydrogels showed higher values, from 234 to 280%. Tensile tests indicated that the presence of starch in the hydrogels provided high flexibility (strain at break?>?300%), while combination with cellulose led to the formation of stiffer hydrogels (elastic moduli 3.9–6.6 MPa). The ultimate tensile strength for both types of hydrogels was similar (2.8–3.9 MPa). The adhesion and growth of human osteoblast-like SAOS-2 cells was higher on hydrogels with cellulose than on hydrogels with starch, and was higher on hydrogels with PEDOT:PSS than on hydrogels without this polymer. The metabolic activity of cells cultivated for 3 days in the hydrogel infusions indicated that no acutely toxic compounds were released. This is promising for further possible applications of these hydrogels in tissue engineering or in wound dressings.

Graphical abstract