220-MHz NMR spectra of acrylic monomer–2-substituted 1,3-diolefin alternating copolymers

An investigation by 220-MHz NMR spectroscopy was carried out on the alternating copolymers of acrylic monomer with 2-substituted 1,3-diolefin. The chain structures were determined. The acrylic monomers used were methyl methacrylate (MMA), acrylonitrile (AN), and methacrylonitrile (MAN); isoprene (IP) and chloroprene (CLP) were the 1,3-diolefins. In the MAN–IP alternating copolymer, the 1-position methylene protons of IP showed an AB quartet peak, confirming the α-1 linkage structure. Similarly, in the MMA–CLP and AN–CLP copolymers, the 1-position methylene protons of CLP showed and AB quartet and an ABX pattern, respectively, confirming the α-1 linkage structure in both these cases also. The α-1 linkage structure was also revealed by the decoupling technique in the MAN–CLP alternating copolymer. The AN–IP and MMA–IP alternating copolymers also possess a bond between the α-position of the acrylic monomer and the 1-position of IP. The monomeric units in the alternating copolymers of acrylic monomers with 2-substituted 1,3-diolefins were generally linked at the α-position of acrylic monomer and the 1-position of 1,3-diolefin. On the other hand, in the Diels-Alder adducts of acrylic monomer with 2-substituted 1,3-diolefin, the reaction takes place between the α-position of acrylic monomer and the 4-position of 1,3-diolefin. The regioselectivity of the alternating copolymers and the Diels-Alder adducts is quite compatible with the expectations from molecular orbital theory.     

Plaunol A and B,new anti-ulcer diterpenelactones from Crotonsublyratus

Two new diterpenelactones named plaunol A ($\text{2}$) and B ($\text{3}$) exhibiting anti-Shay ulcer activity were isolated from Thai medicinal plant, $\text{Croton}$$\text{sublyratus}$. Structure of $\text{2}$ was determined by X-ray analysis of its $\text{p}$-bromobenzoate and structure of $\text{3}$ was deduced from the results of chemical correlation and the spectral data.     

Regioselective oxygenative tetraamination of [60]fullerene. Fullerene-mediated reduction of molecular oxygen by amine via ground state single electron transfer in dimethyl sulfoxide

The reaction of [60]fullerene with a variety of a secondary aliphatic amines in 20% v/v dimethyl sulfoxide in chlorobenzene under an atmospheric pressure of molecular oxygen allows regioselective introduction of four amino groups and one epoxide group around one pentagon of the fullerene molecule in good to high yield. This new synthesis of tetraaminofullerene expoxide can be carried out with a simple procedure on a multigram scale at room temperature and affords a variety of functionalized fullerene derivatives. Near-infrared analysis of a mixture of [60]fullerene and piperidine in a deaerated dimethyl sulfoxide/chlorobenzene mixture indicated equilibrium formation of [60]fullerene radical anion (C60*-) that persists at least for 2 weeks at room temperature but reacts immediately with molecular oxygen to give the tetraaminofullerene expoxide. The Benesi-Hildebrand analysis of the concentration dependency of the near-infrared absorption indicated that a [C60*- piperidine*+] radical ion pair is formed with an equivalent constant of K = 0.62 +/- 0.02 M(-1) at 25 degrees C. This and other lines of evidence suggest that the oxygenative amination reaction involves C60-mediated reduction of molecular oxygen by the amine.     

Modification of Escherichia coli single-stranded DNA binding protein with gold nanoparticles for electrochemical detection of DNA hybridization

The unique binding event between Escherichia coli single-stranded DNA binding protein (SSB) and single-stranded oligonucleotides conjugated to gold (Au) nanoparticles is utilized for the electrochemical detection of DNA hybridization. SSB was attached onto a self-assembled monolayer (SAM) of single-stranded oligonucleotide modified Au nanoparticle, and the resulting Au-tagged SSB was used as the hybridization label. Changes in the Au oxidation signal was monitored upon binding of Au tagged SSB to probe and hybrid on the electrode surface. The amplified oxidation signal of Au nanoparticles provided a detection limit of 2.17 pM target DNA, which can be applied to genetic diagnosis applications. This work presented here has important implications with regard to combining a biological binding event between a protein and DNA with a solid transducer and metal nanoparticles.     

Preparation and characterization of carbonated barium-calcium hydroxyapatite solid solutions

Particles of carbonated barium-calcium hydroxyapatite solid solutions (BaCaHap) with different Ba/(Ba+Ca) (X(Ba)) atomic ratios were prepared by a wet method at 100 degrees C and characterized by various means. The crystal phases and structures of the products strongly depended on the composition of the starting solution, that is, the Ba/(Ba+Ca) atomic ratio ([X(Ba)]) and H3PO4 concentration ([H3PO4]) in the solution. BaCaHap with X(Ba)0.43 could be prepared at [X(Ba)]0.7 by changing [H3PO4], but could never be obtained at [X(Ba)]=0.8-0.95 regardless of [H3PO4]. The carbonated calcium hydroxyapatite particles prepared at [X(Ba)]=0 were fine and short rod-shaped particles (ca. 14x84 nm). With increasing [X(Ba)] from 0 to 0.8, the particles obtained became large spherical agglomerates. The carbonated barium hydroxyapatite particles formed at [X(Ba)]=1 were long rod-shaped agglomerates (ca. 0.2x2 microm) of fine primary particles. The amount of CO2 adsorbed irreversibly on a series of BaCaHaps showed a minimum at (Ba+Ca)/(P+C) atomic ratio of around 1.56, which agreed well with the minimum cation/P ratio obtained for the other hydroxyapatites, as already reported.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. VIII. Polymerization of styrene and methyl methacrylate adsorbed on aerosil

Aerosil is silica having a purity which is very high compared with that of silica gel and having, unlike silica gel, no micropores. To investigate the effects of impurities and micropores on the radiation-induced polymerization of styrene and methyl methacrylate adsorbed on silica gel, the radiation-induced polymerization of styrene and methyl methacrylate adsorbed on Aerosil was carried out. The results of both the styrene–Aerosil 300 system and the methyl methacrylate–Aerosil 300 system were similar to those of the styrene–silica gel and methyl methacrylate–silica gel systems, respectively. This suggests that in the radiation-induced polymerization of both styrene–silica gel and methyl methacrylate–silica gel systems the impurity and the presence of micropores have almost no effects on the reaction mechanism. The effect of aluminum as an impurity was investigated on the styrene–Aerosil MOX 170 system. It was found that aluminum accelerated the cationic polymerization.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. X. Influence of H2O on the styrene–silica gel system

To elucidate the reaction mechanism of radiation-induced polymerization of the styrene—silica gel system, the influence of H₂O as adsorbed water and inhibitor of cationic polymerization was investigated by two methods. Monomer conversion decreased as H₂O increased. In general, percent grafting decreased as H₂O increased, but the presence of a small amount of H₂O increased the percent grafting. Grafting at 16 Mrad has a maximum value at a water content of about 0.2%. This seems to be due to two effects of H₂O: percent grafting increases due to restraint of cationic polymerization by H₂O, but the percent grafting decreases due to adsorption water which interrupts the contact of styrene with silica gel. In GPC spectra, the low molecular weight peaks of both graft polymers and homopolymers decreased when H₂O was added. The GPC results suggest that the number of positive holes which initiate cationic polymerization is very large.     

Chemical compositional separation of styrene-methyl methacrylate copolymers using high-performance liquid chromatography with liquefied carbon dioxide as eluent

Chromatographic separation of styrene-methyl methacrylate (MMA) copolymers depending on the chemical composition was studied using liquefied carbon dioxide as an adsorption promoting solvent, and tetrahydrofuran, chloroform containing ethanol as a desorption promoting solvent in the mobile phase and the column packed non-bonded silica gel by a solvent gradient method. With the increase of MMA content, the elution was retarded indicating that the typical normal-phase type of adsorption occurred. The effects of type of desorption solvents, molecular mass of sample, and column temperature on the elution were investigated.