Time-harmonic response of a vertical crack in plates

A technique for the characterization of an interior crack perpendicular to the surface of the plates is presented. A time-harmonic line load is applied on the upper surface of the plate. The scattered displacement field is calculated by using the strip element method. It is found that there are additional superimposed oscillations in the curve of the absolute values of the displacement in the region between the load and the crack. The mean value of the peaks of the additional oscillations increases with the crack length, and is less dependent on the distance from the load to the crack. The crack position is determined from the displacement distribution curve and the crack length is determined from the mean value of the peaks of the additional oscillations. Approximate polynomial formula of degree four for predicting the length of interior vertical cracks in isotropic homogeneous plates is also proposed. Numerical examples are given to demonstrate the present technique.     

Left versus right canonical Wiener-Hopf factorization and realization

For an arbitrary rational matrix function, not necessarily analytic at infinity, the existence of a right canonical Wiener-Hopf factorization is characterized in terms of a left canonical Wiener-Hopf factorization. Formulas for the factors in a right factorization are given in terms of the formulas for the factors in a given left factorization. All formulas are based on a special representation of a rational matrix function involving a quintet of matrices.     

On finite-dimensional approximation of solutions of ill-posed problems

We show that the modified method for finite-dimensional approximation of solutions of Fredholm integral equations of the first kind presented in this paper is more economical than traditional methods for finite-dimensional approximation. Institute of Mathematies, Ukrainian Academy of Science, Kiev. Translated from Ukrainskii Matematicheskii Zhurnal, Vol. 49, No. 2, pp. 289–295, February, 1997.     

Membrane introduction mass spectrometry

An overview of membrane introduction mass spectrometry (MIMS) is presented and comparisons are made with other direct sample introduction techniques. Special attention is given to the unique advantages and the limitations of newer variants on the MIMS technique, including affinity MIMS, reverse-phase and trap MIMS. The salient features of the interfaces used in MIMS are summarized and the various membrane materials commonly used are delineated. The applicability of MIMS is illustrated via discussion of

1. (i) bioreactor monitoring (represented by yeast fermentation),

2. (ii) environmental monitoring (illustrated by analysis of contaminated ground water samples) and

3. (iii) on-line chemical reaction monitoring (exemplified by the photolysis of aryl esters).

The applicability of MIMS to the analysis of environmental samples, including complex mixtures in water, air and soil, is noted.     

Low-temperature specific heat of crystalline and amorphous Eu2(MoO4)3

The specific heat C _total of crystalline and amorphous Eu₂(MoO₄)₃ is measured in the temperature interval 4.5–30 K. The amorphous state is obtained by applying pressure ∼7 GPa at room temperature. It is found that the specific heat of the crystal at T⩽7.5 K is described by a cubic function of temperature, while the specific heat of the amorphous sample has a strongly non-Debye character in the entire experimental temperature interval. The curve of C _total for amorphous europium molybdate is analyzed in a model of soft atomic potentials, and it is shown that it agrees well with universal low-temperature anomalies of the specific heat of classical glasses obtained by quenching from the liquid. Pis’ma Zh. éksp. Teor. Fiz. 68, No. 8, 623–627 (25 October 1998)     

Selective quenching of tryptophanyl fluorescence in bovine serum albumin by the iodide ion

Modified Stern-Volmer equation is obeyed by bovine serum albumin (BSA)-iodide system showing selective quenching of tryptophanyl fluorescence of BSA. The fraction of accessible protein fluorescence is 0.56 and the effective Stern-Volmer constant is 290 M^-1 at pH 7.4 in 0.005 M phosphate buffer at 25°C. Collisional quenching is operative both in the BSA -I⁻¹ system and the model system, tryptophan-I⁻¹. It is supported by the observed relationship between the ratio of quenching rate constants (k _q ) and diffusion coefficients and alsok _q with bulk viscosity.     

Nonequilibrium Vibrational Kinetics during Hypersonic Flow of a Solid Body in Nitrogen and Its Influence on the Surface Heat Flux

Plasma Chemistry and Plasma Processing - Nonequilibrium nitrogen dissociation-recombination kinetics in the boundary layer and on the surface of a solid body during hypersonic flow. the subsequent...     

On the conjugate boundary value problem

We study the conjugate boundary-value problem with boundary conditions whose orders can be as large as the order of the differential equation or larger. We construct the Green's function of the problem over the entire space when the separating surface is a hyperplane, and we describe its properties. Bibliography: 6 titles.Translated fromMatematicheskie Metody i Fiziko-Mekhanicheskie Polya, Issue 30, 1989, pp. 20–24.     

The anomalous 3-boson couplings as an implication of the Higgs sector

We discuss the possible new electroweak interactions which may be generated by the Higgs sector at the scale of theZ mass. For this purpose, we give a set ofSU(2)×U(1) gauge invariant operators constructed in terms ofW, Z, γ and Higgs fields which in the unitary gauge describe all possible γWW andZWW anomalous couplings. The dimension of these operators varies from 6 to 12. This fact allows us to consider various scenaria for the manifestations of the New Physics. We conclude that the underlying dynamics induced by the Higgs sector can be tested through a model-independent amplitude analysis of gauge boson pair production at LEP2 and future colliders.