Adsorption properties of activated carbon from waste newspaper prepared by chemical and physical activation

Adsorption properties of activated carbons prepared from waste newspaper by chemical and physical activation were investigated using water vapor, ammonia, methane, and methylene blue (MB) as adsorbents. The water vapor adsorption isotherms show type V behavior and the maximum vapor adsorption of the chemically and physically activated products is about 1050 and 450 ml/g, respectively. The higher water vapor adsorption of the chemically activated products is attributed to the higher specific surface area (S(BET)) and greater hydrophilic activity (arising from the surface oxygen-containing functional groups) than in the physically activated products. The adsorption of ammonia and methane was measured by temperature-programmed desorption (TPD). NH(3) adsorption is found to be higher in the chemically activated product than in the physically activated product while methane adsorption is slightly higher in the physically activated products even though these have lower S(BET) values. In the MB adsorption, the chemically activated products show higher adsorption (390 mg/g) than the physically activated product. These results are suggested to be related to the surface characteristics.     

Direct measurement of the mercury content of exhaled air: a new approach for determination of the mercury dose received

A new rapid technique is presented for determination of the dose of mercury inhaled; it is based on direct measurement of the concentration of mercury in exhaled air by use of a Zeeman mercury spectrometer RA-915+. It has been demonstrated experimentally that the dose received during short-term exposure to mercury vapor is determined more reliably by this method rather than by conventional techniques based on measurement of the mercury content in blood or urine.     

Preparation of a novel molecularly imprinted polymer using a water-soluble crosslinking agent

A molecularly imprinted polymer was prepared using a water-soluble crosslinking agent. An ionic complex was utilized as the assembly for the template molecule and the functional monomer, and water as porogenic solvent during preparation of the imprinted polymer. The results of chromatographic evaluations for the prepared polymer suggested that the polymer had much lower hydrophobicity compared with usual octadecyl group bonded silica or the usual molecular imprinted polymer prepared from ethyleneglycol dimethacrylate, and the selective recognition ability for template molecule in the completely aqueous condition.     

Synthesis of CoFe2O4 nanowire in carbon nanotubes. A new use of the confinement effect

Cobalt ferrite nanowires with an average diameter of 50 nm and lengths up to several micrometers were synthesized inside carbon nanotubes under mild reaction conditions using the confinement effect provided by the carbon tubular template.     

Separation strategy for acidic chiral pharmaceuticals with capillary electrochromatography on polysaccharide stationary phases

The effect of five factors on the capillary electrochromatographic enantioseparation of acidic compounds was studied using an experimental design. The studied factors were pH, acetonitrile content in the mobile phase, temperature, buffer concentration, and applied voltage. These experiments allowed defining a generic separation strategy applicable on acidic compounds with chemical and structural diversity. The starting screening conditions consist of a 45 mM ammonium formate electrolyte at pH 2.9 mixed with 65% acetonitrile, an applied voltage of 15 kV, and a temperature of 25 degrees C. The screening phase occasionally can be followed by an optimization procedure. Evaluation of the proposed strategy pointed out that it allows achieving baseline resolution within a relatively short time when a beginning of separation is obtained at the starting conditions. This strategy revealed enantioselectivity for 11 compounds out of 15, of which 10 could be baseline-separated after the proposed optimization steps.     

The solid-phase Nicholas reaction: scope and limitations

Two libraries of alpha-substituted alkynes has been prepared on solid phase using a sequential Sonogashira/Nicholas reaction approach. The scope of nucleophiles in the Nicholas reaction on solid phase has been investigated, including carbon, oxygen, nitrogen, sulfur, fluoride, and hydride nucleophiles. The conditions for the reaction sequence have been optimized in terms of Lewis acid, catalyst for the Sonogashira step, temperature, reaction time, and decomplexation method, enabling the five-step sequence to be performed in 1 day.     

Towards novel difluorinated sugar mimetics; syntheses and conformational analyses of highly-functionalised difluorinated cyclooctenones

Highly-functionalised difluorinated cyclooctenones were synthesised from trifluoroethanol using either metallated difluoroenol acetal or carbamate chemistry, followed by a [2,3]-Wittig rearrangement or aldol reaction. Efficient RCM reactions afforded the title compounds which showed rather restricted fluxional behaviour by VT (19)F NMR. Topological characterisation by molecular modelling and NOESY/ROESY experiments offered a number of challenges, but allowed the identification of two favoured boat-chair conformers which interconverted by pseudorotation with relatively large activation barriers.     

Fullerenes separation with monomeric type C30 stationary phase in high-performance liquid chromatography

The temperature effect on the separation of fullerenes in LC was examined using monomeric type C30, C18 and C8 alkyl bonded stationary phases. It appears that the C30 phase exhibits superior separation ability for fullerenes. It is observed that the maximum retention temperature of fullerenes on the C30 phase is around 20 degrees C. A strong correlation between the changes in NMR spectra and the retention behavior of the solutes was found. The interpretation of the retention behavior of fullerenes on the alkyl bonded stationary phases, including the behavior in subambient temperature, is discussed using the information obtained by CP-MAS solid-state NMR spectroscopy and LC.     

Thermodynamic study of N-trifluoroacetyl-O-alkyl nipecotic acid ester enantiomers on diluted permethylated beta-cyclodextrin stationary phase

Thermodynamic studies were performed on 12 pairs of N-trifluoroacetyl-O-alkyl nipecotic acid ester enantiomers on diluted permethylated beta-cyclodextrin stationary phase (CP Chirasil-Dex CB). The influence of ester alkyl group structure on interaction with permethylated beta-cyclodextrin (Me-CD) and enantioselectivity was studied. The types of alkyl groups studied included n-alkyl (C1-C5) and groups containing branching at differing locations relative to the chiral center of the molecule. The results show that for a given molecular weight, the n-alkyl esters have stronger interactions with Me-CD than esters containing branched alkyl groups. However, although having weaker interactions with Me-CD, esters containing alpha-branched alkyl groups exhibit higher enantioselectivity than the corresponding n-alkyl or beta-branched isobutyl esters. From the retention data, thermodynamic parameters were estimated using the retention increment method and enthalpy-entropy compensation plots (ln R' versus deltaH) were constructed. The results suggest that ester enantiomers with branching at the alpha-carbon of the ester alkyl group have additional and/or different types of enantioselective interactions with Me-CD than the C1-C5 n-alkyl esters or beta-branched isobutyl ester. In order to obtain a qualitative sense of the interaction with Me-CD, structures of the diastereomeric complexes formed between Me-CD and some of the ester enantiomers were modeled using simulated annealing molecular dynamics.     

Effect of tip functionalization on transport through vertically oriented carbon nanotube membranes

Ionic flux through a composite membrane structure, containing vertically aligned carbon nanotubes crossing a polystyrene matrix film, was studied as a function of chemical end groups at the entrance to carbon nanotubes' (CNTs) cores. Plasma oxidation during the membrane fabrication process introduced carboxylic acid groups on the CNTs' tips that were modified using carbodiimide mediated coupling between the carboxylic acid and an accessible amine groups of the functional molecule. Functionalization molecules included straight chain alkanes, anionically charged dye molecules, and an aliphatic amine elongated by polypeptide spacers. Functionalization was confirmed by FTIR spectroscopy, and areal functional density was estimated by transmission electron microscopy studies of thiol terminated sites decorated by nanocrystalline gold. The transport through the membrane of two different sized but equally charged molecules (ruthenium bipyridine [Ru-(bipy)3(2+)] and methyl viologen [MV2+]) was quantified in a U-tube permeation cell by UV-vis spectroscopy. Relative selectivity of the permeates varied from 1.7 to 3.6 as a function of tip-functionalization chemistry. Anionic charged functional groups sharply increased the flux of the cationic permeates. This effect was reduced at higher solution ionic strength consistent with shorter Debye screening length. The observed selectivities were consistent with a hindered diffusion model with functionalization at the CNT tip and not along the length of the CNT core.