Studies on platinum(II) and palladium(II) complexes of some N,N′-disubstituted thiourea derivatives

Summary A series of new Pt^II and Pd^II complexes of N,N-disubstituted thiourea derivatives of general formulae [MLCl₂]₂, [ML₂Cl₂] and [ML₄]Cl₂ have been prepared and characterised by physicochemical and spectroscopic methods. The reaction of these ligands with [M(DMSO)₂Cl₂], M = Pt, cis- or Pd, trans-, in CHCl₃ and EtOH at ambient temperature or under reflux, is described.     

Factorial design in the optimization of preconcentration procedure for lead determination by FAAS

The present paper proposes a preconcentration procedure for lead determination using flame atomic absorption spectrometry (FAAS). It is based on lead(II) ions extraction as brilliant cresyl blue (BCB) complex and its sorption onto Diaion HP-2MG, a methacrylic ester copolymer. The optimization step was carried out using factorial design and the variables studied were pH, shaking time and reagent concentration. In the established experimental conditions, lead can be determinate with a limit of detection of 3.7 μg L⁻¹ lead (N = 20) and a relative standard deviation of 7% for a lead concentration of 100 μg L⁻¹. The accuracy was confirmed by analysis of a certified reference material, the stream sediment furnished by National Research Centre for Certified Reference Materials (NRCCRM), China (GBW 07310). Effect of other ions in the procedure proposed was also studied. The method was applied for lead determination in real samples of water, tea, soil and dust. Tests of addition/recovery in the experiments for lead determination in water samples revealed that the proposed procedure could be applied satisfactorily for analysis of these samples.     

Electrokinetic properties of sepiolite suspensions in different electrolyte media

The present paper deals with the electrokinetic characterization of sepiolite. A series of systematic zeta potential measurements have been carried out to determine the isoelectric point (iep) and potential-determining ions (pdi), and the effect of mono-, di-, and trivalent electrolytes such as NaCl, KCl, LiCl, NaNO(3), NaCH(3)COO, MgCl(2), CaCl(2), BaCl(2), CoCl(2), CuCl(2), Pb(NO(3))(2), Na(2)CO(3), Na(2)SO(4), AlCl(3), FeCl(3), and Na(3)PO(4) on the zeta potential of sepiolite. Zeta potential has been calculated with the aid of Smoluchowski's equation. Sepiolite yields an isoelectric point at pH 6.6. The zeta potential for the sepiolite has ranged from +23.3 mV at pH approximately 2 to -22.4 mV at pH approximately 8 at 20 +/- 2 degrees C in water. The valency of the ions have proven to have a great influence on the electrokinetic behavior of the suspension. Monovalent cations were found to have a weak effect, while di- and trivalent cations made the zeta potential positive. Charge reversal was observed for divalent cations at 1 x 10(-2) M and for trivalent cations at 3 x 10(-4) M. As a result, it can be said that monovalent cations are indifferent ions when di- and trivalent cations are potential-determining ions.     

Melting heat transfer in the stagnation‐point flow of an upper‐convected Maxwell (UCM) fluid past a stretching sheet

The steady laminar boundary layer flow and heat transfer past a stretching sheet arre considered. Upper‐convected Maxwell (UCM) fluid is treated as a rheological model. The resulting nonlinear differential system is solved by homotopy analysis method (HAM). The influence of melting parameter (M), Prandtl number (Pr), Deborah number (β) and stretching ratio (A = a/c) on the velocity and temperature profiles is thoroughly examined. It is noticed that fields are effected appreciably with the variation of parameters. Furthermore, it is seen that the local Nusselt number is a decreasing function of melting parameter. Copyright © 2011 John Wiley & Sons, Ltd.     

Approximation of transformation media-based reshaping action by genetic optimization

The aim of this paper is to study the laser-induced backside wet cleaning techniques for glass substrates. Two kinds of laser cleaning techniques are proposed in this study. The first involves applying an Nd:YAG laser to the backside of the substrate which is submerged in water. A metal plate is placed below the glass substrate. Most of the laser energy will be absorbed by the metal plate. The metal then vaporizes the water and generates a turbulent bubble flow. The bubble flow removes the alumina particles from the surface of the glass substrate. The second involves using a CO₂ laser to generate turbulent bubble flow to remove the particles. Both methods were successfully demonstrated for the removal of submicron particles of 0.5 μm in size. The phenomena of bubble generation and diffusion are presented in the paper. Because the laser is applied to the backside of the substrate, the damage due to the laser heat can be significantly reduced. The quality and efficient of the backside processing is better than those of the front side processing. The proposed techniques have great potential to provide an improved solution for glass cleaning.     

Online Solid-Phase Extraction of Cd(II), Cu(II), and Co(II) Using Covalently Attached Bis(salicylaldimine) to Silica Gel for Determination in Food and Water by Flame Atomic Absorption Spectrometry

In this study, a novel sorbent material bearing a bis(aldimine) group was designed and successfully synthesized by covalently bonding a 2-[N,N′-bis(salicylaldimine)]aminoethyl amine ligand to the silica gel surface that was characterized by carbon, hydrogen, and nitrogen elemental analysis, thermogravimetric analysis, and the Fourier transform infrared spectroscopy technique. The sorbent was used for the online solid-phase extraction (SPE) of Cd(II), Cu(II), and Co(II) ions for their determination at trace concentration levels by flame atomic absorption spectrometry. The effective factors for the online SPE such as the pH and the flow rate of the sample solution, and type, volume, and flow rate of eluent were investigated. The concentration levels of Cd(II), Cu(II), and Co(II) were measured in certified reference materials including Virginia tobacco leaves (CTA-VTL-2) and water-trace elements (NWTM-15.2) to validate this method. The metal levels in environmental water were determined by this method, and the values were checked by spiking and recovery experiments and independent analysis by inductively coupled plasma-mass spectrometry. The adsorption capacities of the sorbent were found to be 41.2, 31.6, and 25.6?mg/g for Cd(II), Cu(II), and Co(II), respectively. This method was also successfully used for the determination of Cd(II), Cu(II), and Co(II) concentrations in rice and molasses.     

Chiral 2-(2-hydroxyaryl)alcohols (HAROLs) with a 1,4-diol scaffold as a new family of ligands and organocatalysts

Efficient and modular syntheses of chiral 2-(2-hydroxyaryl)alcohols (HAROLs), novel 1,4-diols carrying one phenolic and one alcohol hydroxyl group, have been developed which led to generation of a small library of structurally diverse HAROLs in enantiomerically pure form. Of the different HAROLs examined, a HAROL based on the indan backbone exhibited the highest activity and enantioselectivity in the 1,2-addition of certain organometallic compounds to aldehydes in the presence of Ti(OⁱPr)₄ (up to 97% y, 88% ee) and performed as a hydrogen-bond donor organocatalyst in the Morita-Baylis-Hillman reaction, promoted by trialkylphosphines.     

A view about the short histories of the mole and Avogadro’s number

The mole and Avogadro’s number are two important concepts of science that provide a link between the properties of individual atoms or molecules and the properties of bulk matter. It is clear that an early theorist of the idea of these two concepts was Avogadro. However, the research literature shows that there is a controversy about the subjects of when and by whom the mole concept was first introduced into science and when and by whom Avogadro’s number was first calculated. Based on this point, the following five matters are taken into consideration in this paper. First, in order to base the subject matter on a strong ground, the historical development of understanding the particulate nature of matter is presented. Second, in 1811, Amedeo Avogadro built the theoretical foundations of the mole concept and the number 6.022 × 10²³ mol^?1. Third, in 1865, Johann Josef Loschmidt first estimated the number of molecules in a cubic centimetre of a gas under normal conditions as 1.83 × 10¹⁸. Fourth, in 1881, August Horstmann first introduced the concept of gram-molecular weight in the sense of today’s mole concept into chemistry and, in 1900, Wilhelm Ostwald first used the term mole instead of the term ‘gram-molecular weight’. Lastly, in 1889, Károly Than first determined the gram-molecular volume of gases under normal conditions as 22,330 cm³. Accordingly, the first value for Avogadro’s number in science history should be 4.09 × 10²² molecules/gram-molecular weight, which is calculated by multiplying Loschmidt’s 1.83 × 10¹⁸ molecules/cm³ by Than’s 22,330 cm³/gram-molecular weight. Hence, Avogadro is the originator of the ideas of the mole and the number 6.022 × 10²³ mol^?1, Horstmann first introduced the mole concept into science/chemistry, and Loschmidt and Than are the scientists who first calculated Avogadro’s number. However, in the science research literature, it is widely expressed that the mole concept was first introduced into chemistry by Ostwald in 1900 and that Avogadro’s number was first calculated by Jean Baptiste Perrin in 1908. As a result, in this study, it is particularly emphasised that Horstmann first introduced the mole concept into science/chemistry and the first value of Avogadro’s number in the history of science was 4.09 × 10²² molecules/gram-molecular weight and Loschmidt and Than together first calculated this number.