Intra-cavity spectroscopy with diode lasers

A multi-mode diode laser with an external cavity is studied experimentally and theoretically for its application to intra-cavity spectroscopy. One facet of a typical Ga_0.89Al_0.11As laser diode was antireflection-coated by deposition of HfO₂ such that 10^–3 residual reflectivity was left over. This diode was placed in an external optical cavity. The emission spectrum of this diode laser is highly sensitive to any frequency-dependent loss in the cavity, and the detectivity of such a loss grows with the pump rate. Even close to threshold, the absorption at 780 nm of Rb atoms with a density of 5×10¹⁰ cm^–3 has been detected. An adequate model for diode lasers based on rate equations and including frequency-dependent gain saturation is developed and applied to the calculations of output spectra. The sensitivity of these spectra to intra-cavity absorption is determined by the overall cavity loss — which is rather high — and the fraction of spontaneous emission in the total emission, in contrast with dye lasers where it is limited by nonlinear mode coupling. Various criteria for the sensitivity are suggested. The smallest detectable absorption with a perfectly antireflection-coated laser is 10^–6 cm^–1. Improvement of the characteristics of the laser diode would increase the sensitivity.     

Multicenter ligand transformations of thioureas on ruthenium clusters

The reaction of trirutheniumdodecacarbonyl with various thioureas was found to give, depending upon the substituents and the reaction conditions, a large variety of tri-, tetra-, penta-, and hexanuclear ruthenium clusters. The ligand systems observed in the products are derived from the thioureas employed; the fragmentation of the thiourea molecules involve N-H, C-S, C-H, and C-N activation processes.     

Stability of translating solutions to mean curvature flow

We prove stability of rotationally symmetric translating solutions to mean curvature flow. For initial data that converge spatially at infinity to such a soliton, we obtain convergence for large times to that soliton without imposing any decay rates. The authors are members of SFB 647/B3 “Raum – Zeit – Materie: Singularity Structure, Long-time Behaviour and Dynamics of Solutions of Non-linear Evolution Equations”.     

Problems, Models and Complexity. Part II: Application to the DLSP

In Part I of this study, we suggest to identify an operations research (OR) problem with the equivalence class of models describing the problem and enhance the standard computer-science theory of computational complexity to be applicable to this situation of an often model-based OR context. The Discrete Lot-sizing and Scheduling Problem (DLSP) is analysed here in detail to demonstrate the difficulties which can arise if these aspects are neglected and to illustrate the new theoretical concept. In addition, a new minimal model is introduced for the DLSP which makes this problem eventually amenable to a rigorous analysis of its computational complexity.     

Bivariate Free Knot Splines

We consider the least squares approximation of gridded 2D data by tensor product splines with free knots. The smoothing functional to be minimized—a generalization of the univariate Schoenberg functional—is chosen in such a way that the solution of the bivariate problem separates into the solution of a sequence of univariate problems in case of fixed knots. The resulting optimization problem is a constrained separable least squares problem with tensor product structure. Based on some ideas developed by the authors for the univariate case, an efficient method for solving the specially structured 2D problem is proposed, analyzed and tested on hand of some examples from the literature.     

Dielectronic Recombination of Very Heavy Lithiumlike Ions

Hyperfine Interactions - An overview of measurements of dielectronic recombination (DR) with the heaviest lithiumlike ions is presented. The experiments have been carried out at the heavy ion...     

Synthesis and polymerization of o-hexylaniline: Characterization of the corresponding polyaniline

In the field of research on soluble conducting polymers, the poly(o-alkylanilines) are very interesting because we can expect them to give more soluble polymers and new properties. Like poly(o-propylaniline) (POP), which is more soluble than polyaniline (PANi), poly(o-hexylaniline) (POH) appears to be more soluble in organic solvents than POP because of the longer alkyl groups in the 2-position. The higher solubility confers better processability on this new polymer, and because of this solubility, an NMR study in solution became possible.The nitration of hexylbenzene and the reduction of the resulting product to o-hexylaniline were performed according to the literature. The chemical polymerization was easy and it is possible to produce this polymer in large quantities.The polymerization carried out in anhydrous NH₄F, 2.35 HF medium and in 5 M perchloric acid gave a polymer with almost quantitative yield. The electrochemical behaviour of POH displayed faster electron transfers than PANi in organic solvents, depending on the acido-basicity level of the aqueous solutions. Unlike PANi, fractal growth was not observed.     

Realisation and metrological characterisation of thickness standards below 100 nm

High-accuracy film thickness measurements in the range below 100 nm can be made by various complex methods like spectral ellipsometry (SE), scanning force microscopy (SFM), grazing incidence X-ray reflectometry (GIXR), or X-ray fluorescence analysis (XRF). The measurement results achieved with these methods are based on different interactions between the film and the probe. A key question in nanotechnology is how to achieve consistent results on a level of uncertainty below one nanometre with different techniques.Two different types of thickness standards are realised. Metal film standards for X-ray techniques in the thickness range 10 to 50 nm are calibrated by GIXR with monochromatised synchrotron radiation of 8048 eV. The results obtained at four different facilities show excellent agreement. SiO₂ on Si standards for SE and SFM in the thickness range 6 to 1000 nm are calibrated by GIXR with monochromatised synchrotron radiation of 1841 eV and with a metrological SFM. Consistent results within the combined uncertainties are obtained with the two methods. Surfaces and interfaces of both types of standards are additionally investigated by transmission electron microscopy (TEM). PACS 61.10.Kw; 68.55.Jk; 06.20.Fn; 06.60.Mr; 07.79.Lh     

Trace norm estimates for products of integral operators and diffusion semigroups

We give trace norm estimates for products of integral operators and for diffusion semigroups. These are applied to differences of heat semigroups. A natural example of an integral operator with finite trace which is not trace class is given.