Development of a flow-through optosensor for determination of Co(II)

A flow-through optical fibre chemical sensor for the determination of Co(II) at trace level using immobilised 2-(4-pyridylazo)resorcinol (PAR) as the reagent phase is proposed. PAR is physically adsorbed onto XAD-7. This method provided a great sensitivity and simplicity with wide linear response range from 1x10(-2) to 1x10(3)ppm and detection limit of 20ppb. This method also showed a reproducible result with relative standard deviation (R.S.D.) of 1.78% and response time of approximately 5min. The response towards Co(II) was also reversible using acidified KCl as the regenerating solution. Interference studies showed that Cr(III) significantly interfered during the determination. Excellent agreement with reference to inductively coupled plasma optical emission spectroscopy (ICPOES) method was achieved when the developed sensor was applied for determination of Co(II) in aqueous samples.     

Theoretical study of ibuprofen phototoxicity

The photochemical properties and degradation of the common nonsteroid anti-inflammatory drug ibuprofen is studied by means of hybrid density functional theory. Computed energies and properties of various species show that the deprotonated form dominates at physiological pH, and that the species will not be able to decarboxylate from a singlet excited state. Instead, decarboxylation will occur, with very high efficiency, provided the deprotonated compound can undergo intersystem crossing from an excited singlet to its excited triplet state. In the triplet state, the C-C bond connecting the carboxyl group is elongated, and the CO2 moiety detaches with a free energy barrier of less than 0.5 kcal/mol. Depending on the local environment, the decarboxylated product can then either be quenched through intersystem crossing (involving the possible formation of singlet oxygen) and protonation, or serve as an efficient source for superoxide anions and the formation of a peroxyl radical that will initiate lipid peroxidation.     

Structural organization of the needle complex of the type III secretion apparatus of Shigella flexneri

The secretion apparatus known as the needle complex (NC) from the bacterium Shigella flexneri was studied by single particle electron microscopy. The isolated intact NC appears in projection to be composed of a basal body consisting of seven rings and a protruding needle appendage. A comparison of averaged projections of the intact NC and its fragments revealed the organization of the NC into several major subcomplexes. One of these lacks an inner membrane ring of the basal body but still presents the needle appendage attached to four upper rings. The position of the needle appendage within these rings is variable, suggesting that the dissociated component is necessary for stabilizing the needle appendage. Averaged images of the subcomplex lacking the inner membrane basal rings show a thicker extension at the base of the needle appendage, called the socket. This socket was also found to be present in images of the basal body fragment isolated from mutants lacking the mxiH and mxiI genes. This suggests that the socket is not composed of MxiH and MxiI subunits, which form the needle appendage. A symmetry analysis of the basal body top view projections indicated that a peripheral protein component of the inner membrane ring is present in a ring with 24 copies, in contrast to the Salmonella typhimurium NC. A model is presented in which the NC is only associated to the outer- and inner-membranes with its first and seventh ring, respectively.     

Synthesis and characterization of new polyphenols derived from o-dianisidine: The effect of substituent on solubility, thermal stability, and electrical conductivity, optical and electrochemical properties

In this study, we proposed to synthesize soluble polyphenol derivatives containing azomethine bond. For this reason, o-dianisidine was chosen to synthesize Schiff base monomers due to containing dimethoxy groups. Four phenolic Schiff bases were synthesized by condensation reaction of o-dianisidine with salicylaldehyde (2-HBADIAN), 4-hydroxybenzaldehyde (4-HBADIAN), vanillin (MHBADIAN) and 3-ethoxy-4-hydroxybenzaldehyde (EHBADIAN). These monomers were converted to their polyphenol derivatives via oxidative polycondensation reaction (OP). The structures of the obtained compounds were confirmed by FT-IR, UV-vis, ¹H NMR and ¹³C NMR techniques. Progressing of OP was also followed by a time-controlled spectrum mode of a UV-vis spectrophotometer. The molecular weight distribution parameters of the synthesized polyphenols were determined by the size exclusion chromatography (SEC). The synthesized compounds were also characterized by solubility tests, TG-DTA and DSC. Cyclic voltammetry (CV) measurements were carried out and HOMO-LUMO energy levels and electrochemical band gaps () were calculated. Additionally, optical band gaps (E_g) were determined by using UV-vis spectra of the materials. Electrical conductivities of both doped and undoped states of the synthesized materials were measured by four-point probe technique using a Keithley 2400 electrometer showing that P-2-HBADIAN has approximately 130 times higher electrical conductivity than the others. Also, it was stressed that the synthesized polyphenols are semiconductors which have a potential for electronic and optoelectronic applications, with fairly low band gaps.     

Crystallization behavior of Mg–Cu–Y amorphous alloy

Amorphous Mg₆₁Cu₂₄Y₁₅ ribbons were manufactured by melt-spinning at wheel speeds in the range 5?C20?ms^?1. The crystallization behavior of amorphous ribbons was investigated by a combination of differential scanning calorimetry (DSC) and X-ray diffractometry. DSC measurements showed that the amorphous ribbons exhibit distinct glass transition temperature and wide supercooled liquid region before crystallization. During continuous heating three exothermic peaks and two endothermic peaks were observed. The characteristic thermodynamic parameters such as T _g, T _x , ??T _x , and T _rg are around 432?C439, 478?C485, 46?C54?K, and 0.55?C0.56, respectively. Isothermal annealing DSC traces for this amorphous alloy, the first crystallization peak showed a clear incubation period and Avrami exponent was found to be 2.30?C2.74, which indicate that the transformation reaction involved nucleation and three-dimensional diffusion controlled growth. Mechanical properties of the as-quenched and subsequently annealed ribbons were examined by Vickers microhardness (HV) measurements. Results showed that microhardness of the as-quenched ribbons were about 309?HV. However, the results also showed that microhardness of the rapidly solidified ribbons increases with the increasing temperature.     

Synthesis, X-ray crystal structures, thermal and electrochemical properties of thiosemicarbazidatodioxouranium(VI) complexes

The stable uranyl complexes, [UO(2)(L)C(9)H(19)OH], were obtained from 3,5-dichlorosalicyl-(L(I)) and salicyl-aldehyde-S-propyl-thiosemicarbazones (L(II)) with substituted-salicylaldehyde in nonyl alcohol. The structures of the complexes have been characterized by elemental analysis, IR, (1)H NMR, conductivity, magnetic moment measurements, cyclic voltammetry, thermal gravimetric analysis and single crystal X-ray diffraction technique. The U(VI) centre is seven-coordinated in a distorted pentagonal bipyramidal geometry. The relative orientations of the nonyl alcohol and S-propyl group in the title complexes are completely different due to different crystal packing. Electrochemical behaviors of the thiosemicarbazone ligands and the uranyl complexes were studied using cyclic voltammetry and square wave voltammetry. Redox processes of the compounds are significantly influenced by the central metal ions and the nature of substituents on the thiosemicarbazones, which are important factors in controlling the redox properties. In situ spectroelectrochemical studies were employed to determine the colors and spectra of electro-generated species of the complexes.     

Stacked films immobilization of MBTH in nafion/sol-gel silicate and horseradish peroxidase in chitosan for the determination of phenolic compounds

The stacked-film immobilization of 3-methyl-2-benzothiazolinone hydrazone (MBTH) in hybrid nafion/sol-gel silicate film and horseradish peroxidase (HRP) in chitosan, performed in order to allow the determination of phenolic compounds, was investigated via an optical method. The stacked films were deposited onto a microscope glass slide by a spin-coating technique. The quinone or free radical product formed by the enzymatic reactions of phenolic compounds interacts with MBTH to form azo-dye products, which can be measured spectrophotometrically at a wavelength of 500 nm. The color intensity of the product was found to increase in proportion to the phenolic concentration after 5 min of exposure. The response of the biosensor was linear over concentration ranges of 0.025–0.500, 0.010–0.070 and 0.050–0.300 mM for guaiacol, resorcinol and o-cresol, respectively, and gave detection limits of 0.010, 0.005 and 0.012 mM. The sensor exhibited good sensitivity and stability for at least two months.     

Solubility of LIDOCAINE in Ionic, Nonionic and Zwitterionic Surfactants

The solubility of an anesthetic drug, LIDOCAINE, in water was investigated in the presence of ionic, nonionic and zwitterionic surfactants at 25 °C, and the solubility was found to increase linearly with the surfactant concentration. The molar solubilization ratio, R _m,s, and Gibbs free energy, DG_s^o\Delta G_{\mathrm{s}}^{\mathrm{o}} values for nonionic surfactants fall in the order DDAO > Brij 35 > Brij 30, whereas for ionic and zwitterionic surfactants the order is DDAPS > DTAB > SDS. The high negative values of the Gibbs energies in the cases of DDAO and DDAPS prove them to be better surfactants for solubilizing this drug as compared to the other surfactants.     

Intelligent active force control of a 3-RRR parallel manipulator incorporating fuzzy resolved acceleration control

This paper introduces a novel intelligent control scheme for robust and precise positioning and orientation of a class of highly non-linear 3-RRR (revolute-revolute-revolute) planar parallel manipulator. The primary objective is to force the manipulator to track accurately a prescribed Cartesian trajectory when the system is subjected to different types of disturbances in the forms of forced harmonic excitations. A two level fuzzy tuning resolved acceleration control (FLRAC) is first designed and implemented to the system to demonstrate the stable response of the manipulator in performing trajectory tracking tasks in the absence of the disturbances. In this scheme, the first level of fuzzy tuning is used to acquire the proportional-derivative (PD) gains linearly while the second level considers non-linear tuning for determining the other parameters of the fuzzy controller to increase its performance. Then, the controller is added in series with an active force controller (AFC) to create a novel two degree-of-freedom (DOF) controller known as FLRAC-AFC which is subsequently and rigorously tested for system robustness and accuracy in tracking the prescribed trajectory. The simulation study provides further insight into the potentials of the proposed robotic system in rejecting the disturbances for the given operating conditions. The results clearly show that the FLRAC-AFC scheme provides a much superior trajectory tracking capability compared to the conventional linear RAC alone.     

The 370-nm electronic spectrum of tropolone: Evidence from single vibronic level fluorescence spectra regarding the assignment of some vibrational fundamentals in the X̃ and à states

Single vibronic level fluorescence (SVLF) spectra of tropolone from vibronic levels in the $\text{A}\text{?}{}^1\text{B}{}_2$ electronic state, in combination with recently reported supersonic jet spectra, have enabled the assigning of many absorption bands in the region of 0₀⁰ which had previously been impossible. Some of the complexity in these bands has been shown to be due to a large Duschinsky effect involving the two lowest b₁ vibrations, ν₂₅ and ν₂₆. It has been shown that these vibrations have wavenumbers of 176 and 110 cm^?1, respectively, in the $\text{X}\text{?}$ state, and 172 and 39 cm^?1 in the $\text{A}\text{?}$ state. This last value shows how unresistent the molecule is in the $\text{A}\text{?}$ state to out-of-plane bending in the region of the five-membered ring. Other aspects of the vibrational complexity are due to the effect of ν′₂₆ in increasing the barrier to tunnelling of the hydrogen-bonding proton in the $\text{A}\text{?}$ state contrasting with very little effect of ν″₂₆ in the $\text{X}\text{?}$ state.