Termolecular ion-molecule reactions in Titan’s atmosphere. II: The structure of the association adducts of HCNH+ with C2H2 and C2H4

The ion-molecule reactivity of the products formed in the association reactions of HCNH+ with C2H2 (C3H4N+) and C2H4 (C3H6N+) has been investigated to provide information on the structures of the adducts thus formed. The C3H4N+ and C3H6N+ adducts were formed in the reaction flow tube of a flowing afterglow sourced-selected ion flow tube (FA-SIFT) and their reactivity with a neutral molecular "probe" examined. The reactivity of possible known structural isomers for the C3H4N+ and C3H6N+ ions was investigated in both the FA-SIFT and an ion cyclotron resonance spectrometer (ICR). Ab initio investigations of the potential energy surfaces for both structures at the G2(MP2) level have also been performed and structures corresponding to local minima on both surfaces have been identified and evaluated. The results of these experimental and theoretical studies show that at room temperature, the C3H4N+ adduct ion contains two isomers; a less reactive one that is likely to be a four-membered cyclic covalent isomer (approximately 70%) and a faster reacting component that is probably an electrostatic complex (approximately 30%). The C3H6N+ adduct ion formed from HCNH+ + C2H4 at room temperature is a single isomer that is likely to be the four-membered covalently bound cyclic CH2CH2CHNH+ species.     

Measurements in the separation region of a gas-particle cross flow

This paper reports the results from a study of the effects of particles on the boundary layer characteristics for cross flow over a single circular cylinder in the near separation region and on a cylinder located in the second row of a small mock-up heat exchanger array. Two size ranges of particles (45–85 m and 100–200 m) with two concentrations were used for the single cylinder tests. For the array, the larger particles were used at a single concentration. For the single cylinder, the results with the larger particles at mass loading ratio of 1.0 show an obvious effect on the velocity profile shape and on the rms levels. For reduced concentrations, and for the smaller particles, the effects are less noticeable. For the array, similar trends are observed and a delay in the separation point is reported.     

Kinetic energy dependence of the reactions of N+ and N2+ with molybdenum

Mass-selected beams of N⁺ and N₂⁺ in the energy range 5–50 eV react with molybdenum to produce a surface nitride. The relative reaction cross section for N⁺ reaction is higher than that of N₂⁺ in the range 5–25 eV and N₂⁺ exhibits a reaction threshold near 7 eV. The N₂⁺ threshold suggests collisional dissociation prior to reaction.     

Lack of correlation between DNA strand breakage and p53 protein levels in human fibroblast strains exposed to ultraviolet lights

The contribution of DNA strand breaks accumulating in the course of nucleotide excision repair to upregulation of the p53 tumor suppressor protein was investigated in human dermal fibroblast strains after treatment with 254 nm ultraviolet (UV) light. For this purpose, fibroblast cultures were exposed to UV and incubated for 3 h in the presence or absence of l-beta-D-arabinofuranosylcytosine (araC) and/or hydroxyurea (HU), and then assayed for DNA strand breakage and p53 protein levels. As expected from previous studies, incubation of normal and ataxia telangiectasia (AT) fibroblasts with araC and HU after UV irradiation resulted in an accumulation of DNA strand breaks. Such araC/HU-accumulated strand breaks (reflecting nonligated repair-incision events) following UV irradiation were not detected in xeroderma pigmentosum (XP) fibroblast strains belonging to complementation groups A and G. Western blot analysis revealed that normal fibroblasts exhibited little upregulation of p53 (approximately 1.2-fold) when incubated without araC after 5 J/m2 irradiation, but showed significant (three-fold) upregulation of p53 when incubated with araC after irradiation. AraC is known to inhibit nucleotide excision repair at both the damage removal and repair resynthesis steps. Therefore, the potentiation of UV-induced upregulation of p53 evoked by araC in normal cells may be a consequence of either persistent bulky DNA lesions or persistent incision-associated DNA strand breaks. To distinguish between these two possibilities, we determined p53 induction in AT fibroblasts (which do not upregulate p53 in response to DNA strand breakage) and in XP fibroblasts (which do not exhibit incision-associated breaks after UV irradiation). The p53 response after treatment with 5 J/m2 UV and incubation with araC was similar in AT, XPA, XPG and normal fibroblasts. In addition, exposure of XPA and XPG fibroblasts to UV (5, 10 or 20 J/m2) followed by incubation without araC resulted in a strong upregulation of p53. We further demonstrated that HU, an inhibitor of replicative DNA synthesis (but not of nucleotide excision repair), had no significant impact on p53 protein levels in UV irradiated and unirradiated human fibroblasts. We conclude that upregulation of p53 at early times after exposure of diploid human fibroblasts to UV light is triggered by persistent bulky DNA lesions, and that incision-associated DNA strand breaks accumulating in the course of nucleotide excision repair and breaks arising as a result of inhibition of DNA replication contribute little (if anything) to upregulation of p53.     

Comparison of uncoated, pyro-coated and totally pyrolytic graphite tubes for the HGA-500 electrothermal atomiser

The analytical performance of three uncoated electrographite tubes, three pyro-coated electrographite tubes, one tantalum carbide (TaC) coated electrographite tube, and three totally pyrolytic graphite (TPG) tubes has been evaluated and compared. A test programme was devised to determine the useful operational lifetime of each tube, and assess the influence of tube age on the sensitivity of lead, manganese and vanadium measurements by atomic absorption spectrometry. The TPG tubes were found to be more durable than the other types studied, but the lifetime advantage depended on the thickness of the pyrolytic graphite. The best TPG tube, of 720 μm wall-thickness, lasted 2.5 times longer than the pyro-coated tubes, and 5 times longer than the uncoated electrographite tubes.The TPG tubes gave slightly poorer AAS sensitivity for lead, equivalent sensitivity for manganese, and 4 times better sensitivity for vanadium than the pyro-coated electrographite tubes. Also, with TPG, signal magnitude was more consistent throughout the lifetime of a tube. For each of the test elements studied, poorest sensitivity was encountered with the TaC-coated electrographite tube.     

Formalising the Pathways to Life Using Assembly Spaces

Assembly theory (referred to in prior works as pathway assembly) has been developed to explore the extrinsic information required to distinguish a given object from a random ensemble. In prior work, we explored the key concepts relating to deconstructing an object into its irreducible parts and then evaluating the minimum number of steps required to rebuild it, allowing for the reuse of constructed sub-objects. We have also explored the application of this approach to molecules, as molecular assembly, and how molecular assembly can be inferred experimentally and used for life detection. In this article, we formalise the core assembly concepts mathematically in terms of assembly spaces and related concepts and determine bounds on the assembly index. We explore examples of constructing assembly spaces for mathematical and physical objects and propose that objects with a high assembly index can be uniquely identified as those that must have been produced using directed biological or technological processes rather than purely random processes, thereby defining a new scale of aliveness. We think this approach is needed to help identify the new physical and chemical laws needed to understand what life is, by quantifying what life does.     

Synthesis and Systematic Study on the Effect of Different PEG Units on Stability of PEGylated,Integrin-αvβ6-Specific A20FMDV2 Analogues in Rat Serum and Human Plasma

A20FMDV2 is a 20-mer peptide that exhibits high selectivity and affinity for the tumour-related αvβ6 integrin that can compete with extracellular ligands for the crucial RGD binding site, playing a role as a promising αvβ6-specific inhibitor for anti-cancer therapies. Unfortunately, the clinical value of A20FMDV2 is limited by its poor half-life in blood caused by rapid renal excretion and its reported high susceptibility to serum proteases. The incorporation of poly (ethylene glycol) chains, coined PEGylation, is a well-established approach to improve the pharmacokinetic properties of drug molecules. Here, we report a systematic study on the incorporation of a varying number of ethylene glycol units (1–20) into the A20FMDV2 peptide to establish the effects of PEGylation size on the peptide stability in both rat serum and human plasma. In addition, the effect of acetyl and propionyl PEGylation handles on peptide stability is also described. Selected peptide analogues were assessed for integrin-αvβ6-targeted binding, showing good specificity and activity in vitro. Stability studies in rat serum established that all of the PEGylated peptides displayed good stability, and an A20FMDV2 peptide containing twenty ethylene glycol units (PEG₂₀) was the most stable. Surprisingly, the stability testing in human plasma identified shorter PEGs (PEG₂ and PEG₅) as more resistant to degradation than longer PEGs, a trend which was also observed with affinity binding to integrin αvβ6.     

ThH5: An Actinide-Containing Superhalogen Molecule

Thorium and its compounds have been widely investigated as important nuclear materials. Previous research focused on the potential use of thorium hydrides, such as ThH₂, ThH₄, and Th₄H₁₅, as nuclear fuels. Here, we report studies of the anion, ThH₅⁻, by anion photoelectron spectroscopy and computations. The resulting experimental and theoretical vertical detachment energies (VDE) for ThH₅⁻ are 4.09 eV and 4.11 eV, respectively. These values and the agreement between theory and experiment facilitated the characterization of the structure of the ThH₅⁻ anion and showed its neutral counterpart, ThH₅ to be a superhalogen. ThH₅⁻, which exhibits a C_4v structure with five Th−H single bonds, possesses the largest known H/M ratio among the actinide elements, M. The adaptive natural density partitioning (AdNDP) method was used to further analyze the chemical bonding of ThH₅⁻ and to confirm the existence of five Th−H single bonds in the ThH₅⁻ molecular anion.