9,9-diphenyl-1,9,10,10a-tetrahydro-2H-phenaleno[1,9-bc]pyrans

Reaction between some naphtho[2,1-b]pyrans and 1,1-diphenylethene affords 9,9-diphenyl-1,9,10,10a-tetrahydro-2H-phenaleno[1,9-bc]pyrans.     

Retention, kinetics and thermodynamics profile of cadmium adsorption from iodide medium onto polyurethane foam and its separation from zinc bulk

The sorption behaviour of 2.5 × 10⁻⁵ M solution of Cd(II) on polyurethane foam (PUF) from iodide medium have been investigated. The conditions were optimized from aqueous solutions of different pH (1-10) and of acids of varied concentration (0.01-1.0 M). The maximum concentration of KI was found to be 0.24 M and equilibration time was established to be 20 min. The data successfully followed the Freundlich and Dubinin-Radushkevich (D-R) isotherms at low metal ion concentration while Langmuir isotherm followed at higher metal ion concentration. The Freundlich parameter 1/n = 0.66 ± 0.02 have been evaluated whereas D-R isotherm yields the sorption free energy E = 10.5 ± 0.1 kJ mol⁻¹ indicating ion exchange type chemisorption. The monolayer coverage (XL) constant of Langmuir isotherm was found to be 23.7 ± 0.4 mg g⁻¹. The numerical values of thermodynamics parameters enthalpy (ΔH), entropy (ΔS) and Gibbs free energy (ΔG) indicated the endothermic and spontaneous nature of sorption. The Scatchard plot analysis was tested to evaluate the binding sites of the PUF and stability constants of sorption were determined. On the basis of these parameters, the sorption mechanism was discussed. Among the foreign ions tested, Pb(II), Hg(II), cyanide and nitrite should be absent. The clean separation of Cd(II) from Zn(II) ions in the ratio 1:250, respectively, was achieved by column chromatography.     

Unsteady incompressible flow of magnetized aluminium oxide and titanium oxide nanoparticles with blood base fluid

In this investigation, a mixed convective nanoparticles fluid flow over an inclined plate is deliberated. The effects of slip boundary wall and magnetic field are also considered. The dimensionless governing system for the considered problem is attained by implementing recent definitions of fractional derivatives (FD). The generalized solution is obtained through the Laplace Transformation Scheme (LTS) for the momentum and thermal expressions. To improve the novelty and to demonstrate some more physical perception of the stated research work, some remarkable special cases of velocity distribution through CF and AB-fractional derivative concept are addressed, whose daily life implication is well known in the existing literature. Moreover, to evaluate the physical interest of the stated problem, the outcomes of the obtained system graphical illustrations are made by utilizing MATHEMATICA. As a result, we concluded that the aluminium oxide $A{l}_2{O}_3$ nanoparticles show more decaying behavior as compared to titanium oxide $Ti{O}_2$ nanoparticles for temperature and velocity profile. Furthermore, both fields i.e., momentum and thermal distributions are increased with the help of rising estimations parameter. Current results report novel applications in enhancement of heat transfer, thermal engineering, chemical processes, engineering and electronics devices, solar systems, extrusion processes, fission reactions etc.     

A massively parallel electrochemical approach to the miniaturization of organic micro- and nanostructures on surfaces

This paper describes a simple and convenient strategy for reducing the dimensions of organic micro-and nanostructures on metal surfaces. By varying electrochemical desorption conditions, features patterned by dip-pen nanolithography or micro contact printing and made of linear alkanethiols or selenols can be gradually desorbed in a controlled fashion. The process is referred to as electrochemical whittling because the adsorbate desorption is initiated at the exterior of the feature and moves inward as a function of time. The whittling process and adsorbate desorption were studied as a function of substrate morphology, adsorbate head and tail groups, and electrolyte solvent and salt. Importantly, one can independently address different nanostructures made of different adsorbates and effect their miniaturization based upon ajudicious selection of adsorbate, applied potential, and supporting electrolyte. Some of the physical and chemical origins of these observations have been elucidated.     

Total synthesis of (+)-xyloketal D, a secondary metabolite from the mangrove fungus Xylaria sp.

(+)-Xyloketal D was prepared in a one-pot multistep domino reaction by heating optically active 5-hydroxy-4-methyl-3-methylenepentan-2-one (R) in toluene with 2,4-dihydroxyacetophenone. The absolute configuration of the natural product was confirmed by preparation of the starting enone from a lactone of established absolute configuration.     

Polymerization of methyl methacrylate in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization

Four tetradentate nitrogen ligands, viz. dichloro{[N,N^′-diphenyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (1), {[N,N^′-dioctyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (2), {[N,N^′-dibenzyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (3), and (1R,2R)-(−)-N,N^′-di(quinoline-2-methyl) di-iminocyclohexane (4), were investigated as novel complexing ligands in iron-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate where ethyl-2-bromoisobutyrate was the initiator in o-xylene at 90 °C. With ligands 1 and 2 the experimental molecular weights increased gradually with monomer conversion. High to moderate conversions (87%, 43%) were obtained in relatively short times (90 min for 1 and 30 min for 2), which indicates an efficient catalyst system, but after these times a dramatic increase in viscosity of the polymerization medium led to loss of control. It is noteworthy that polymerization proceeded in a controlled manner with ligand 1, which has two rather bulky substituents on the N-atom. Such bulky ligands did not work for a copper-based system, where they led to excessive terminations or other side reactions. When the bulkiness of the substituents was significantly increased, as in ligand 3, a decrease in polymerization rate and loss of control occurred. Ligand 4 was less efficient than the other ligands, probably because the ethylene bridge was replaced by cyclohexane bridge.     

Hall effects and entropy generation applications for peristaltic flow of modified hybrid nanofluid with electroosmosis phenomenon

The electroosmotic peristaltic flow of modified hybrid nanofluid in presence of entropy generation has been presented in this thermal model. The Hall impact and thermal radiation with help of nonlinear relations has also been used to modify the analysis. The assumed flow is considered due to a non-uniform trapped channel. The properties of modified hybrid nanofluid model are focused with interaction of three distinct types of nanoparticles namely copper ($Cu)$, silver ($Ag$) and aluminum oxide ($A{l}_2{O}_3).$ The mathematical modeling and significances of entropy generation and Bejan number are identified. With certain flow assumptions, the governing equations are attained for optimized peristaltic electroosmotic problem. Widely used assumptions of long wave length and low Reynolds number reduced the governing equations in ordinary differential equations. The ND solver is flowed for the solution process. The physical significant of results is observed by assigning the numerical values to parameters.     

Synthesis and pharmacological activity of 4-(4'-(chlorophenyl)-4-hydroxypiperidine) derivatives

A new series of 4-(4'-chlorophenyl)-4-hydroxypiperidine derivatives (2-5), substituted at nitrogen, were synthesized and tested as potential analgesic compounds as well as evaluated for their effect on hypotensive activity. Results showed that all the derivatives exhibit significant analgesic activity in male Wistar rats at a dose of 50 mg/kg of body weight after intramuscular injection, when tested by thermal stimuli (tail flick test). Pethidine was used as reference drug. Compounds 2, 3 and 5 produced reduction in blood pressure in normotensive rat.     

Facile synthesis and characterization of monocrystalline cubic ZrO2 nanoparticles

Crystalline ZrO₂ nanoparticles were prepared from zirconium isopropoxide by slow hydrolysis and subsequent hydrothermal treatment of solutions containing various amounts of sodium hydroxide at 180 °C. Whereas moderately basic solutions lead to the formation of nanoparticles of monoclinic ZrO₂ with plate-like morphology, and nanoparticles of the cubic ZrO₂ high-temperature polymorph with diameters of approx. 5 nm were obtained from strongly basic solutions. The morphology, structure and properties of as-synthesized nanoparticles were characterized using HRTEM, XRD, Raman spectroscopy, UV–vis, PL spectroscopy and BET measurements. The formation of both, the monoclinic and the cubic polymorph, was confirmed by electron microscopy and Raman spectroscopy. The crystallinity and morphology of the resulting ZrO₂ nanoparticles can be adjusted by the choice of the reaction conditions. The cubic ZrO₂ nanoparticles have a high surface area (300 m²/g) and exhibit a strong photoluminescence in the UV region.     

Three-stage sequential extraction procedure for metal partitioning in polluted soils and sediments

The sequential extraction procedure proposed by the Standard, Measurements and Testing program "SM&T" of the European Union has been applied to evaluate the amounts of Cr, Cu, Mn, Ni, Pb and Zn, extracted at each stage and indirectly their mobility and bioavailability in soil and sediment samples from a polluted area. Analysis of the extracts was carried out by flame atomic absorption spectrometry (FAAS). No significant matrix interferences were found except for Cr in the acetic acid and hydroxylammonium chloride extracts, which required determination by the standard additions method. Both of soils and sediments studied show similar partitioning of Mn, Ni, Cu and Cr. Mn and Ni can be considered to have significant component bound to the acido-soluble fraction, whereas, Cr and Cu occur largely in the organic and residual phases. The partitioning of Pb and Zn was different between soil and sediment. In terms of mobility and bioavailability, in soils, Ni and Mn can be regarded as moderately available followed by a lower availability of Pb while Cu, Zn and Cr have a very limited availability. In sediments, a higher availability (short-medium term) of Mn and Zn was presumed followed by a lower availability of Ni and Pb, whereas, Cu and Cr, occurring largely in the organic and residual phases, were of very limited availability.