An efficient synthesis of imidazolinium salts using vinyl sulfonium salts

The synthesis of imidazolinium salts from the reaction of formamidines and (2-bromoethyl)diphenylsulfonium triflate is described. A variety of symmetrical and unsymmetrical imidazolinium triflate salts were synthesized in high yield in short reaction times under mild conditions. Aromatic and aliphatic N-substituents work well. The reaction is proposed to proceed via generation of a vinyl sulfonium salt intermediate from the bromoethylsulfonium triflate.     

Synthesis of PEDOT Nanoparticles and Vesicles by Dispersion Polymerization in Alcoholic Media

Summary: The synthesis of PEDOT nanoparticles and vesicles by dispersion polymerization in a methanol/water mixture (3/2, v/v) is reported, using either ammonium persulfate or iron(III) p‐toluenesulfonate as oxidants and α‐EDOT‐PEO as a reactive stabilizer. The influence of the oxidant as well as the α‐EDOT‐PEO molar mass and concentration on the core‐shell particle morphology and conductivity properties have been investigated. PEDOT particles with conductivities up to 1.5 × 10⁻² S · cm⁻¹ have been obtained in high yield.

TEM image of PEDOT vesicles prepared using PEO‐based stabilizers of 25 000 g · mol⁻¹ in water/methanol mixture (2:3 v/v) at room temperature using ammonium persulfate as an oxidant.     

Understanding Complex Electrochemical Impedance Spectroscopy in Corrosion Systems Using in‐situ Synchrotron Radiation Grazing Incidence X‐ray Diffraction

The difficulty in interpreting electrochemical impedance spectroscopy (EIS) data has limited the potential of the method despite its utility as an electrochemical method for studies of electrode reactions and interfacial structures. Taking the test case of the carbon dioxide corrosion of carbon steel, in‐situ synchrotron radiation grazing incidence X‐ray diffraction (SR‐GIXRD) has been demonstrated to be a powerful technique for validating and understanding the interfacial structures associated with complex EIS data. Carbon dioxide corrosion was found to occur in several steps, which may only be surmised by EIS, but the use of SR‐GIXRD in conjunction with EIS has enabled the establishment of a link between EIS time constants and structural changes associated with the evolution of corrosion products with time. By comparison to previous studies by the authors and others in this field, this communication provides the first direct experimental evidence linking SR‐GIXRD surface compositional data to otherwise indistinctive EIS time constants.     

Synthesis of 5‐(Arylselanyl)‐2‐(arylsulfanyl)benzoates by [3+3] Cyclocondensation of 3‐(Arylsulfanyl)‐1‐(silyloxy)buta‐1,3‐dienes with 2‐(Arylselanyl)‐3‐(silyloxy)alk‐2‐en‐1‐ones

Functionalized 5‐(arylselanyl)‐2‐(arylsulfanyl)benzoates were prepared by [3+3] cyclocondensation of 3‐(arylsulfanyl)‐1‐(silyloxy)buta‐1,3‐dienes with 2‐(arylselanyl)‐3‐(silyloxy)‐alk‐2‐en‐1‐ones.     

A Novel One Pot Synthesis of o‐Nitrophenylacetic Acid and Unexpected p‐Nitrobenzoic Acid by HNO3‐Mediated CH2 Extrusion Reaction of Phenylacetic Acid

The HNO₃‐mediated CH₂ extrusion reactions of phenylacetic acid lead to one pot synthesis of unexpected commercially important product 4‐nitrobenzoic acid through the formation of 4‐nitrophenylacetic acid and 2‐nitrophenylacetic acid.     

Underwater femtosecond laser micromachining of thin nitinol tubes for medical coronary stent manufacture

Microprofiling of medical coronary stents has been dominated by the use of Nd:YAG lasers with pulse lengths in the range of a few milliseconds, and material removal is based on the melt ejection with a high-pressure gas. As a result, recast and heat-affected zones are produced, and various post-processing procedures are required to remove these defects. This paper reports a new approach of machining stents in submerged conditions using a 100-fs pulsed laser. A?comparison is given of dry and underwater femtosecond laser micromachining techniques of nickel–titanium alloy (nitinol) typically used as the material for coronary stents. The characteristics of laser interactions with the material have been studied. A femtosecond Ti:sapphire laser system (wavelength of 800?nm, pulse duration of 100?fs, repetition rate of 1?kHz) was used to perform the cutting process. It is observed that machining under a thin water film resulted in no presence of heat-affected zone, debris, spatter or recast with fine-cut surface quality. At the optimum parameters, the results obtained with dry cutting showed nearly the same cut surface quality as with cutting under water. However, debris and recast formation still appeared on the dry cut, which is based on material vaporization. Physical processes involved during the cutting process in a thin water film, i.e. bubble formation and shock waves, are discussed.     

Fluid Flow Analysis of Integrated Porous Bone Scaffold and Cancellous Bone at Different Skeletal Sites: In Silico Study

The dynamic characteristic of bone is its ability to remodel itself through mechanobiological responses. Bone regeneration is triggered by mechanical cues from physiological activities that generate structural strain and cause bone marrow movement. This phenomenon is crucial for bone scaffold when implanted in the cancellous bone as host tissue. Often, the fluid movement of bone scaffold and cancellous bone is studied separately, which does not represent the actual environment once implanted. In the present study, the fluid flow analysis properties of bone scaffold integrated into the cancellous bone at different skeletal sites are investigated. Three types of porous bone scaffolds categorized based on pore size configurations: 1 mm, 0.8 mm and hybrid (0.8 mm interlaced with 0.5 mm) were used. Three different skeletal sites of femoral bone were selected: neck, lateral condyle and medial condyle. Computational fluid dynamics was utilized to analyze the fluid flow properties of bone scaffold integrated cancellous bone. The results of this study reveal that the localization and maximum value of shear stress in an independent bone scaffold are significantly different compared to the bone scaffold integrated with cancellous bone by about 160% to 448% percentage difference. Low shear stress and high permeability were found across models that have higher Tb.Sp (trabecular separation). Specimen C and femoral lateral condyle showed the highest permeability in their respective category.

     

Effects of exponential volume fraction law on the natural frequencies of FGM cylindrical shells under various boundary conditions

In the present work, vibration characteristics of thin functionally graded cylindrical shells are studied under the influence of various boundary conditions. Fabrication of FGM cylindrical shell is carried out by using exponential volume fraction law. Strain- and curvature-displacements relationships are taken from Love’s thin shell theory. The frequency equation in the form of eigenvalue problem is obtained by adapting the Rayleigh-Ritz method. Characteristic beam functions are assumed to approximate the axial modal dependence. Effects of exponential volume fraction law on the natural frequencies of the FGM cylindrical shells for various boundary conditions are studied against circumferential wave number, length to radius ratio and thickness to radius ratio for different values of power law exponents. Results evaluated show good agreement with those available in the literature.