Line Profile Measure as a Stopping Criterion in CG-SENSE Algorithm

Conjugate gradient SENSE (CG-SENSE) is a parallel magnetic resonance imaging reconstruction algorithm which solves the inversion problem of SENSE iteratively. One major limitation of CG-SENSE is the appropriate choice of the number of iterations required for good reconstruction results. Fewer iterations result in aliasing artifacts and too many iterations result in an increased noise level. This paper proposes a novel method to define the stopping criterion of CG-SENSE algorithm which is based on the use of correlation measure between the line profiles of the reconstructed images in the current and the previous iterations. The results are compared with Bregman distance-stopping criterion. Artifact power and peak signal-to-noise ratio are used to quantify the quality of the reconstructed images. The results demonstrate that the line profile correlation measure acts as an effective stopping criterion in CG-SENSE.     

Efficient photodegradation of methylthioninium chloride dye in aqueous using barium tungstate nanoparticles

BaWO₄ nanoparticles were successfully used as the photocatalysts in the degradation of methylthioninium chloride (MTC) dye at different pH levels of aqueous solution. Pure phase of barium tungstate (BaWO₄) nanoparticles was synthesized by modified molten salt process at 500 °C for 6 h. Structural and morphological characterizations of BaWO₄ nanoparticles (average particle size of ~40 nm) were studied in details using powder x-ray diffraction (XRD), FTIR, Raman, energy-dispersive, electron microscopic, and x-ray photoelectron spectroscopy (XPS) techniques. Direct band gap energy of BaWO₄ nanoparticles was found to be ~3.06 eV from the UV–visible absorption spectroscopy followed by Tauc’s model. Photocatalytic properties of the nanoparticles were also investigated systematically for the degradation of MTC dye solution in various mediums. BaWO₄ nanoparticles claim the significant enhancement of the photocatalytic degradation of aqueous MTC dye to non-hazardous inorganic constitutes under alkaline, neutral, and acidic mediums.

Open image in new window

Graphical abstract BaWO₄ nanoparticles enhance the rate of photocatalytic degradation of organic dyes in various mediums.

     

Closed solution to electromagnetic scattering of a plane wave by an eccentric cylinder coated with metamaterials

Closed series solution of electromagnetic scattering by an eccentric coated cylinder is achieved in matrix form. Diffracted field patterns are examined for an incident plane transverse magnetic (TM) wave. The solution is found by the classical separation of variables technique and the translational addition theorems. Wave transformation and orthogonality of the complex exponentials are employed to produce an infinite series. Numerical results are then shown by shortening the infinite series to a limited number of terms. Solutions are discussed for a dielectric or a metamaterial coating.     

Transfer of radioactivity from soil to vegetation in Rechna Doab,Pakistan

In Rechna Doab, samples of the most common vegetation, perennial grass Desmostachya bipinnata (dab), were collected along with soil samples from 29 sites. Natural radioactivity of ²²⁶Ra, ²³²Th/²²⁸Ac and ⁴⁰K was measured by using high purity germanium-based gamma ray spectrometer. Activity concentration levels of ²²⁶Ra, ²³²Th/²²⁸Ac and ⁴⁰K in soil were found to be 46.8±6.2 (36.0–57.6), 61.4±5.9 (48.2–73.2) and 644.8±73.9 (537.7–868.4) Bq kg^?1 (dry mass), respectively, and those in vegetation were 2.74±1.70 (1.00–6.39), 2.24±0.59 (1.56–2.61) and 172.72±113.37 (53.14–469.24) Bq kg^?1 (dry mass), respectively. The measured values of the activity concentration in vegetation are comparable with some other international data. Calculated soil to vegetation transfer factors of ²²⁶Ra, ²²⁸Ac and ⁴⁰K were 0.06±0.03 (0.02–0.14), 0.04±0.01 (0.03–0.04) and 0.26±0.16 (0.09–0.69). The mean outdoor absorbed dose rate in air for the area under study was determined as 8.22 nGy h^?1 and the mean indoor absorbed dose rate in air was 11.52 nGy h^?1. The total annual effective dose to the general public from the vegetation was found to be (0.02–0.16) mSv, which is below the recommended limit value of 1 mSv y^?1 for the general public. The dab vegetation under study was found to be radiologically safe for the population and environment.     

Harmonic and Intermodulation Performance of Fabry-Perot Intensity Modulator

Abstract

In this article, a mathematical model for the transfer function of the Fabry-Perot intensity modulator is presented. The model, basically a cosine-series function, can be used to obtain closed-form expressions for the amplitudes of the harmonic and intermodulation products of the Fabry-Perot intensity modulator driven by a multi-frequency radio frequency voltage. The special case of a Fabry-Perot intensity modulator driven by an equal-amplitude two-frequency radio frequency voltage is considered in detail, and the results are compared, whenever possible, with previously published experimental and numerically obtained results.     

Transfer of radioactivity from soil to vegetation in Rechna Doab, Pakistan

In Rechna Doab, samples of the most common vegetation, perennial grass Desmostachya bipinnata (dab), were collected along with soil samples from 29 sites. Natural radioactivity of 22?Ra, 232Th/22?Ac and ??K was measured by using high purity germanium-based gamma ray spectrometer. Activity concentration levels of 22?Ra, 232Th/22?Ac and ??K in soil were found to be 46.8 ± 6.2 (36.0-57.6), 61.4 ± 5.9 (48.2-73.2) and 644.8 ± 73.9 (537.7-868.4) Bq kg?1 (dry mass), respectively, and those in vegetation were 2.74 ± 1.70 (1.00-6.39), 2.24 ± 0.59 (1.56-2.61) and 172.72±113.37 (53.14-469.24) Bq kg?1 (dry mass), respectively. The measured values of the activity concentration in vegetation are comparable with some other international data. Calculated soil to vegetation transfer factors of 22?Ra, 22?Ac and ??K were 0.06 ± 0.03 (0.02-0.14), 0.04 ± 0.01 (0.03-0.04) and 0.26 ± 0.16 (0.09-0.69). The mean outdoor absorbed dose rate in air for the area under study was determined as 8.22 nGy h?1 and the mean indoor absorbed dose rate in air was 11.52 nGy h?1. The total annual effective dose to the general public from the vegetation was found to be (0.02-0.16) mSv, which is below the recommended limit value of 1 mSv y?1 for the general public. The dab vegetation under study was found to be radiologically safe for the population and environment.     

Zn-Co bimetallic supported ZSM-5 catalyst for phosgene-free synthesis of hexamethylene–1,6–diisocyanate by thermal decomposition of hexamethylene–1,6–dicarbamate

A set of mono-and bimetallic(Zn-Co) supported ZSM-5 catalysts was first prepared by PEG-additive method. The physicochemical properties of the catalysts were investigated by FTIR, XPS, XRD, N_2adsorption-desorption measurements, SEM, EDS and NH3-TPD techniques. The physicochemical properties showed that the Zn Co_2O_4 spinel oxide was formed on the ZSM-5 support and provided effectual synergetic effect between Zn and Co species for the bimetallic catalyst. Furthermore, bimetallic supported ZSM-5 catalyst exhibited weak, moderate and strong acidic sites, while the monometallic supported ZSM-5 catalyst showed only weak and moderate or strong acidic sites. Their catalytic performances for thermal decomposition of hexamethylene–1,6–dicarbamate(HDC) to hexamethylene–1,6–diisocyanate(HDI) were then studied. It was found that the bimetallic supported ZSM-5 catalysts,especially Zn-2Co/ZSM-5 catalyst showed excellent catalytic performance due to the good synergetic effect between Co and Zn species, which provided a suitable contribution of acidic sites. HDC conversion of 100% with HDI selectivity of 91.2% and by-products selectivity of 1.3% could be achieved within short reaction time of 2.5 h over Zn-2Co/ZSM-5 catalyst.     

Efficiency analysis of thermosyphon solar flat plate collector with low mass concentrations of ND–Co3O4 hybrid nanofluids: an experimental study

Journal of Thermal Analysis and Calorimetry - In the present study, the thermal efficiency, convective heat transfer and friction factor analysis are investigated for a flat plate solar collector...     

New sensitive spectrophotometric method for the determination of clomipramine-HCl in pure form and pharmaceutical preparations

A simple, rapid and sensitive spectrophotometric method for the assay of clomipramine-HCl is described. It has been found that clomipramine-HCl reacts with ammonium molybdate in acetic medium to give blue color product exhibiting maximum absorbance at 712 nm. The reaction is selective for clomipramine-HCl with 1 μg/mL as visual limit of detection. It provides a basis for a sensitive spectrophotometric method for the determination of clomipramine-HCl. The method obeys Beer’s Law from 0.001 to 0.250 mg/mL. The standard deviation does not exceed 0.005 mg/mL. The method has been successfully applied to the determination of clomipramine-HCl in pure form and pharmaceutical preparations. The quantitative assessment of tolerable amounts of possible interferants was also studied. The results are reproduced within ±1% and are in good agreement with those obtained by the standard procedure.