Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

Trennung,Identifizierung und Bestimmung von Bactericiden auf der Basis von halogenierten Aromaten mittels Gas-Chromatographie

The separation of a mixture of 22 bactericides has been achieved by gas chromatography on columns with silicone rubber W-982 as stationary phase with temperatures between 100° and 300°C. The unchanged compounds as well as their silylation products have been used. The latter are more conveniently used especially for the quantitative determination. To be able to calculate the retention indices after Kovats gas chromatography has been performed isothermally at 180°C for the more volatile compounds and at 250°C for all other bactericides.The retention indices obtained under these conditions are tabulated together with the limits of detection.     

Thermodynamique des melanges binaires LiPO3-Pb(PO3)2: Diagramme de phases et étude thermodynamique du liquide

Study of solid-liquid phase diagram of LiPO₃-Pb(PO₃)₂ binary system, in certain calcination conditions, shows the existence of several metastable phasis. When heated at a temperature of 723 K the binary mixtures lead uncompletely to a defined compound Pb₂Li(PO₃). On heating these ternary solid mixtures, three eutectic reactions have been observed: LiPO₃+Pb(PO₃)₂→Liquid at a temperature of 793 K(1) LiPO₃+Pb₂Li(PO₃)₅→Liquid at a temperature of 843 K (2) Pb₂Li(PO₃)₅+Pb(PO₃)₂→Liquid at a temperature of 891 K (3) The metastable liquid phase appears in the system at temperature of 793 K. DTA experiments performed on the binary LiPO₃-Pb(PO₃)₂ mixtures, show a superposition of two diagrams. The first one is metastable and the second represents the stable equilibrium phase diagram. Measurements of liquid enthalpy of binary LiPO₃-Pb(PO₃)₂ system at temperature of 979.65 K were reported. The corresponding values were very small and so the binary system can be considered as athermal. Assuming an ideal behaviour, the liquidus curves in the metastable diagram were calculated and the eutectic reaction (LiPO₃-Pb(PO₃)₂→Liquid) was confirmed at 793 K. This revised version was published online in August 2006 with corrections to the Cover Date.     

2-Amino-4-bromobutanoic Acid

(2S)- and (2R)-2-Amino-4-bromobutanoic acid were prepared starting from N-Boc-glutamic acid α tert-butyl ester. The double tert-butyl protection was necessary to prevent a partial racemisation during Barton’s radical decarboxylation used to transform the γ-carboxylic group into a bromide. This bromide reacted with different nitrogen, oxygen and sulphur nucleophiles to give nonnatural amino acids characterised by basic or heterocyclic side chains. The title compound was also used to prepare a conformationally constrained peptidomimetic.     

A molecular mechanics approach for analyzing tensile nonlinear deformation behavior of single-walled carbon nanotubes

In this paper, by capturing the atomic information and reflecting the behaviour governed by the nonlinear potential function, an analytical molecular mechanics approach is proposed. A constitutive relation for single-walled carbon nanotubes (SWCNT’s) is established to describe the nonlinear stress-strain curve of SWCNT’s and to predict both the elastic properties and breaking strain of SWCNT’s during tensile deformation. An analysis based on the virtual internal bond (VIB) model proposed by P. Zhang et al. is also presented for comparison. The results indicate that the proposed molecular mechanics approach is indeed an acceptable analytical method for analyzing the mechanical behavior of SWCNT’s. The project supported by the National Natural Science Foundation of China (10121202, 90305015 and 10328203), the Key Grant Project of Chinese Ministry of Education (0306) and the Research Grants Council of the Hong Kong Special Administrative Region, China (HKU 7195/04E).     

Screening an In-House Isoquinoline Alkaloids Library for New Blockers of Voltage-Gated Na+ Channels Using Voltage Sensor Fluorescent Probes: Hits and Biases

Voltage-gated Na⁺ (Na_V) channels are significant therapeutic targets for the treatment of cardiac and neurological disorders, thus promoting the search for novel Na_V channel ligands. With the objective of discovering new blockers of Na_V channel ligands, we screened an In-House vegetal alkaloid library using fluorescence cell-based assays. We screened 62 isoquinoline alkaloids (IA) for their ability to decrease the FRET signal of voltage sensor probes (VSP), which were induced by the activation of Na_V channels with batrachotoxin (BTX) in GH3b6 cells. This led to the selection of five IA: liriodenine, oxostephanine, thalmiculine, protopine, and bebeerine, inhibiting the BTX-induced VSP signal with micromolar IC₅₀. These five alkaloids were then assayed using the Na⁺ fluorescent probe ANG-2 and the patch-clamp technique. Only oxostephanine and liriodenine were able to inhibit the BTX-induced ANG-2 signal in HEK293-hNa_V1.3 cells. Indeed, liriodenine and oxostephanine decreased the effects of BTX on Na⁺ currents elicited by the hNa_V1.3 channel, suggesting that conformation change induced by BTX binding could induce a bias in fluorescent assays. However, among the five IA selected in the VSP assay, only bebeerine exhibited strong inhibitory effects against Na⁺ currents elicited by the hNav1.2 and hNav1.6 channels, with IC₅₀ values below 10 µM. So far, bebeerine is the first BBIQ to have been reported to block Na_V channels, with promising therapeutical applications.     

Preparation of nano-hydroxyapatite/poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) biocomposite microspheres

Nano-hydroxyapatite (HA)/poly(l-lactide) (PLLA) composite microspheres with relatively uniform size distribution were prepared by a solid-in-oil-in-water (s/o/w) emusion solvent evaporation method. The encapsulation of the HA nanopaticles in microshperes was significantly improved by grafting PLLA on the surface of the HA nanoparticles (p-HA) during emulsion process. This procedure gave a possibility to obtain p-HA/PLLA composite microspheres with uniform morphology and the encapsulated p-HA nanoparticle loading reached up to 40 wt% (33 wt% of pure HA) in the p-HA/PLLA composite microspheres. The microstructure of composite microspheres from core-shell to single phase changed with the variation of p-HA to PLLA ratios. p-HA/PLLA composite microspheres with the diameter range of 2–3 μm were obtained. The entrapment efficiency of p-HA in microspheres could high up to 90 wt% and that of HA was only 13 wt%. Surface and bulk characterizations of the composite microspheres were performed by measurements such as wide angle X-ray diffraction (WAXD), thermal gravimetric analysis (TGA), environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM).     

The effect of drying method on the properties and nanoscale structure of cellulose whiskers

Cellulose whiskers were prepared from wood- and cotton-based microcrystalline cellulose and dried by two methods: freeze-drying or air-drying. The effect of drying method on the properties and structure of the whiskers were studied. Furthermore, the influence of the source of cellulose on the nanoscale structure was investigated. Drying method was observed to slightly influence the thermal stability of cellulose whiskers, whereas the char residue varied significantly depending on the drying process performed. Small- and wide-angle X-ray scattering and solid state nuclear magnetic resonance spectroscopy were used to examine the crystallinity and nanoscale structure of the dried whiskers. It was observed that the crystal structure and crystallinity of cellulose whiskers remained during all treatments, whereas their nanoscale structure was significantly influenced by drying method, neutralization, and source of cellulose. Relationships between thermal behavior and nanoscale structure were reported and discussed.     

DSC study of stabilizing effect of antioxidant mixtures in styrene-butadiene rubber

The type of cooperation between antioxidants in the binary mixtures of four substituted diphenylamines and phenotiazine in the stabilization of styrene-butadiene rubber has been tested. Thermooxidation of the samples has been studied by differential scanning calorimetry under non-isothermal conditions. The protection factors of the individual stabilizers and their mixtures were determined. The synergy factors were applied to asses the type of cooperation of antioxidants in the mixtures. From their values it can be concluded that the type of cooperation depends on temperature. The highest synergistic effect has been observed for the mixture of phenotiazine and [4-(1-methyl-1-phenyl-ethyl)-phenyl]-phenylamine.