Complexes of tri- and tetra-protonated forms of 1,4,8,12-tetraazacyclopentadecane with chloride,nitrate, iodate,and sulfate ions in aqueous media: I. Formation constants,thermodynamic properties,and bonding mechanisms

Complexation stoichiometries and formation constants of tri- and tetra-protonated forms of 1,4,8,12-tetraazacyclopentadecane with NO ₃ ^– , Cl^–, IO ₃ ^– and SO ₄ ^2– ions are determined by pH potentiometric and¹³C NMR spectrometric measurements. Estimates of H and S are obtained from the values of the temperature dependent formation constants and acid dissociation constants. All four anions form only 1 : 1 complexes with the triprotonated amine species. NO ₃ ^– and Cl^– form 1 : 1 complexes only with the tetraprotonated amine, while IO ₃ ^– and SO ₄ ^2– form both 1 : 1 and 2 : 1 complexes. The complexation behavior is interpreted in terms of solvation and internal hydrogen bonding interactions.     

Solid-State 13C-NMR spectral evidence for charge transfer complex formation in aromatic diimides and dianhydrides

Solution and solid-state proton decoupled ¹³C-NMR spectra were determined on two diimides derived from 4, 4′-oxydiphthalic anhydride. Comparison of the individual diimide spectra to that of a mixture of the two diimides indicates that ordering of these materials occurs in the solid state via charge transfer complex formation. A similar study was conducted using two isomeric dianhydrides, 4, 4′-isophthaloyldiphthalic anhydride (IDPA) and 4, 4′-terephthaloyldiphthalic anhydride (TDPA). The solution spectra of these compounds are similar and are those which would be expected for these compounds. However, their solid state spectra differ from each other. The solid-state spectrum of TDPA resembles its solution spectrum, whereas, that of IDPA differs greatly from its solution spectrum and indicates charge transfer complex formation occurs with this molecule. This difference is explained in terms of the stereochemistry of the two isomeric dianhydrides.     

“Helter‐Skelter‐Like” Perylene Polyisocyanopeptides

Exciton migration! Spectroscopic analyses and extensive molecular dynamics studies revealed a well‐defined 4₁ helix in which the perylene molecules (see figure) form four “helter‐skelter‐like” overlapping pathways along which excitons and electrons can rapidly migrate.

     

Influence of surface chemistry on the adsorption of oxygenated hydrocarbons on activated carbons

The objective of this work was to study the adsorption of different oxygenated hydrocarbons (methanol, ethanol, 1 and 2-butanol, methyl acetate) on activated carbons from organic mixtures with cyclohexane. Three activated carbons prepared by thermal and chemical treatments of a commercial carbon were employed for this purpose. Their textural properties were found to be similar, whereas their surface chemistries were modified, as shown by temperature-programmed desorption coupled to mass spectrometry (TPD-MS) and X-ray photoelectron spectroscopy (XPS). The adsorption isotherms were obtained by depletion method, and the analysis of adsorbed species was evaluated by TPD-MS to obtain new insight into the interactions between the different hydrocarbons and the carbon surface. Ethanol leads to a high-energy interaction between its hydroxyl function and the oxygenated surface groups and also to a lower energy interaction between the aliphatic part of the molecule and the carbon material. The desorption activation energy for this hydrophilic interaction is high (50 to 105 kJ/mol), and it is related to the nature of the carbon surface groups. The relative importance of these two interactions depend on the size of the alcohol/methanol is similar to ethanol, whereas butanols lead to more dispersive interactions. Methyl-acetate cannot undergo this kind of strong interaction and behaves like cyclohexane, having desorption activation energies ranging between 25 and 45 kJ/mol no matter the molecule and the carbon surface chemistry.     

Synthesis of the enantiomer of the structure assigned to the natural product nobilisitine A

The synthesis of the enantiomer of the structure, 1, assigned to the natural product nobilisitine A has been accomplished using the enantiomerically pure cis-1,2-dihydrocatechol 4 as starting material. The (1)H and (13)C NMR spectral data derived from compound ent-1 do not match those reported for the natural product, thus suggesting its structure has been incorrectly assigned.     

Nitrogen bridgehead compounds. Part 70. Studies on quinolizine derivatives. Part 4. Ultraviolet-visible spectra and chemical properties of some quinolizine derivatives and their monocyclic tautomers

Ultraviolet-visible spectra of 4-oxo 1 and 4-imino 2 quinolizines or their monocyclic tautomers 3, 4 have been studied in neutral, acidic and basic ethanolic solution as well as in dimethyl sulfoxide and chloroform. Ring B of 4-oxo and 6-unsubstituted 4-imino compounds can be cleaved by sodium ethanolate more or less easily. Ring B of 6-methyl-4-iminoquinolizines is very unstable and they are present mainly in the monocyclic form which are partly dissociated in ethanol and dimethyl sulfoxide especially in higher dilution or in the presence of sodium ethanolate. In dilute acidic ethanol or chloroform, the dissociation is suppressed and in the latter solvent and in some cases, absorption bands can be observed due to a small amount of the 4-imino-6-methylquinolizines. In acidic solution of compounds 3B=C, 3D, 4E, 4F=G having simultaneously cyano and ethoxycarbonyl groups in 1 and 3 position, not simple reprotonation occurs but irreversible changes can be observed.     

High resolution on a quadrupole ion trap mass spectrometer

By using a modified ion trap mass spectrometer, resolution in excess of 30,000 (FWHM) at m I z 502 is demonstrated. The method of increasing resolution in the ion trap mass spectrometer operated in the mass-selective instability mode depends on decreasing the rate of scanning the primary radio frequency amplitude as well as using resonance ejection at the appropriate frequency and amplitude. A theoretical basis for the method is introduced.     

Specific allylic-allylic coupling procedures effected by ligand-induced elimination from di(allylic)palladium species

Bis(allylic)palladium complexes can be induced to undergo reductive elimination by replacement of phosphine ligands in the system with π-acidic ligands. The product 1,5-diencs, formed in high yield, are predominantly the ‘head-to-head’ coupled isomers. The bis(allylic)palladium intermediatesmay be formed by addition of an allylic Grignard or trialkyl(allylic)tin reagent to an (η³-allyl)palladiuin chloride complex, or by 1,3-diene condensation. The latter process leads to cydodimerization, ‘unusual’ for palladium catalysed reactions.     

Optical purification of a mixture of chiral forms by dimer formation

We introduce a readily executable method for the optical purification of "scalemic" (non 50%-50%) mixtures of chiral molecules of opposite handedness ("enantiomers"). The method relies on the formation of two types of dimers, (R-R or S-S) "homodimers" and (R-S) "heterodimers." The selectivity is linked to the difference in sign recently discovered by us to exist between certain transition-dipole matrix elements of opposite enantiomers. This sign difference results in differences in spectral propensity rules: In homodimers, transitions from the ground state can only take place to inversion symmetric excited states, while in the heterodimer the transitions are much more likely to proceed to antisymmetric excited states (although for heterodimers weak transitions to symmetric states might exist). These opposing propensity rules fully explain the observed large differences in the spectra of homodimers vs. heterodimers, which exist despite the almost identical energy levels positions. We illustrate the general concepts by computationally demonstrating the optically induced enantio-purification of scalemic mixtures of the hydropropionic C(3)H(6)O(3) (lactic) acid.     

Simulating the formation of sodium:electron tight-contact pairs: watching the solvation of atoms in liquids one molecule at a time

The motions of solvent molecules during a chemical transformation often dictate both the dynamics and the outcome of solution-phase reactions. However, a microscopic picture of solvation dynamics is often obscured by the concerted motions of numerous solvent molecules that make up a condensed-phase environment. In this study, we use mixed quantum/classical molecular dynamics simulations to furnish the molecular details of the solvation dynamics that leads to the formation of a sodium cation-solvated electron contact pair, (Na(+), e(-)), in liquid tetrahydrofuran following electron photodetachment from sodide (Na(-)). Our simulations reveal that the dominant solvent response is comprised of a series of discrete solvent molecular events that work sequentially to build up a shell of coordinating THF oxygen sites around the sodium cation end of the contact pair. With the solvent response described in terms of the sequential motion of single molecules, we are then able to compare the calculated transient absorption spectroscopy of the sodium species to experiment, providing a clear microscopic interpretation of ultrafast pump-probe experiments on this system. Our findings suggest that for solute-solvent interactions similar to the ones present in our study, the solvation dynamics is best understood as a series of kinetic events consisting of reactions between chemically distinct local structures in which key solvent molecules must be considered to be part of the identity of the reacting species.