Nb芯增强MgB2多芯超导线材的制备及性能研究

以Nb/Cu复合管作为外包套材料,Nb棒作为中心增强体,通过原位法粉末装管工艺(in-situ PIT)制备了不同芯丝结构的TiC 粉末掺杂MgB2/NbCu多芯线材.在高纯流动氩气保护条件下、700℃烧结2h进行成相反应.对烧结后的线材分别进行了应力-应变分析、微观结构以及超导电性等分析检测.拉伸实验分析表明,Nb芯...     

Multi-modal calculations of prompt fission neutrons from 238U（n,f） at low induced energy

Properties of prompt fission neutrons from ²³⁸U(n, f) are calculated for incident neutron energies below 6 MeV using the multi-modal model, including the prompt fission neutron spectrum, the average prompt fission neutron multiplicity, and the prompt fission neutron multiplicity as a function of the fission fragment mass υ(A) (usually named “sawtooth” data) The three most dominant fission modes are taken into account. The model parameters are determined on the basis of experimental fission fragment data. The predicted results are in good agreement with the experimental data.     

A novel simulation method to evaluate the collection performance of a monolithic active pixel sensor

A novel simulation method is presented in this paper to evaluate the collection performance of monolithic active pixel sensor (MAPS) devices for minimum ionizing particle tracking. A simplified 3D matrix pixel structure is built using the computer aided design software Sentaurus. The virtual device is then divided into hundreds of parts and an independent customized X photon model is involved in each part to simulate the conditions under ⁵⁵Fe radiation. After data processing and analysis, charge collection efficiency, collection time and diffusion conditions can be estimated in detail. In order to verify the reliability of the method, comparisons are made between the simulations and experiments. Although there are some defects, it can be concluded that the proposed idea is a feasible method for the evaluation of the MAPS collection performance.     

Electromechanical cracking in ferroelectrics driven by large scale domain switching

Experimental results indicate three regimes for cracking in a ferroelectric double cantilever beam (DCB) under combined electromechanical loading. In the loading, the maximum amplitude of the applied electric field reaches almost twice the coercive field of ferroelectrics. Thus, the model of small scale domain switching is not applicable any more, which is dictated only by the singular term of the crack tip field. In the DCB test, a large or global scale domain switching takes place instead, which is driven...     

Structural behaviour of fibre metal laminates subjected to a low velocity impact

Structural impact tests were first presented to cover typical fibre metal laminates (FMLs) subjected a low velocity projectile impact,which produced the corresponding load-displacement traces and deformation/failure modes for the validation of numerical models.Finite element (FE) models were then developed to simulate the impact behaviour of FMLs tested.The aluminium (alloy grade 2024-0) layer was modelled as an isotropic elasto-plastic material up to the on-set of post failure stage,followed by shear failu...     

一种新型温湿度测量系统的设计

为了解决传统温湿度测量系统存在的标定和校准过程复杂而引起的精度不高的问题,文中介绍了一种新型的温湿度测量系统。该系统由瑞士SENSIR ION公司新生产的SHT11数字式温湿度传感器和日本NEC公司生产的78F9177Y单片机为核心组成,具有电路简单、免标定、精度高和可靠性好等优点。     

Determination of the time resolution for neutron scintillation detectors by multi-coincidence measurement

Based on the multi-coincidence measurement, the time resolution of three liquid scintillation detectors (BC501A) were determined strictly by solving the coincidence equations, where the influence from electronics estimated by self coincidence measurement as well as the background had been considered. The result of this work agreed well with the result that was deduced from the traditional method, and it will be helpful to analyze the energy resolution of neutron time of flight spectra measured by using such detectors at CIAE (China Institute of Atomic Energy).     

一种基于结构性改变的光子晶体光纤光栅理论研究

对一种新型基于结构性改变的光子晶体光纤光栅原理进行了研究.采用多极法分析了结构性改变对折射率的影响,得到有效折射率与包层气孔塌缩之间的关系,建立了结构性改变光子晶体光纤光栅模型.利用耦合模理论对所成光栅性能进行了分析,重点研究了包层空气孔层数、空气孔占空比、气孔塌缩程度对光栅谐振波长、带宽的影响.研究结果表明,光子晶体...     

用于光纤法布里-珀罗传感器腔长互相关解调的光楔的数学模型研究

光楔是实现光纤法布里-珀罗(F-P)传感器互相关解调的重要光学元件.根据互相关解调的原理分析了造成光楔和光纤F-P传感器F-P腔的反射光相位不同的因素,进而建立了光楔的干涉光强的数学模型,在此基础上对具有不同反射率的光楔的干涉光强进行了数值仿真,和相同反射率的光纤F-P传感器F-P腔的干涉光强对比之后建立了光楔的简化数...     

Transmission-mode GaN photocathode based on graded Al_xGa_(1-x)N buffer layer

We create a GaN photocathode based on graded Alx Ga1-x N buffer layers to overcome the influence of buffer-emission layer interface on the photoemission of transmission-mode GaN photocathodes.A gateshaped spectral response with a 260-nm starting wavelength and a 375-nm cut-off wavelength is obtained.Average quantum efficiency is 15% and short wavelength responses are almost equivalent to long wavelength ones.The fitted interface recombination velocity is 5×104 cm/s,with negligible magnitude,proving that the design of the graded buffer layers is efficient in obtaining good interface quality between the buffer and the emission layer.