Simultaneous kinetic spectrophotometric determination of Cu(II), Co(II) and Ni(II) using partial least squares (PLS) regression

A partial least squares (PLS-1) calibration model based on kinetic—spectrophotometric measurement, for the simultaneous determination of Cu(II), Ni(II) and Co(II) ions is described. The method was based on the difference in the rate of the reaction between Co(II), Ni(II) and Cu(II) ions with 1-(2-pyridylazo)2-naphthol in a pH 5.8 buffer solution and in micellar media at 25°C. The absorption kinetic profiles of the solutions were monitored by measuring the absorbance at 570 nm at 2 s intervals during the time range of 0–10 min after initiation of the reaction. The experimental calibration matrix for the partial least squares (PLS-1) model was designed with 30 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 0.1-2 μg mL⁻¹ for each cation. The proposed method was successfully applied to the simultaneous determination of Cu(II), Ni(II) and Co(II) ions in water and in synthetic alloy samples.      

Determination of amylose in Iranian rice by multivariate calibration of the surface plasmon resonance spectra of silver nanoparticles

A simple and non-separative analytical method for selective determination of amylose in Iranian rice has been developed. It was based on the reduction of silver ions by amylose and production of Ag nanoparticles, which exhibit surface plasmon resonance (SPR) spectra in the ultraviolet/visible region. The formation of Ag nanoparticles in the presence of amylose was monitored by transmission electron microscopy (TEM) and dynamic light scattering (DLS). The experimental conditions were optimized to obtain the highest yield for nanoparticle formation. Partial least square (PLS) regression as an efficient multivariate spectral calibration method was employed to make a connection between the SPR spectra of the generated Ag nanoparticles and the amylose content (AC) of the rice starch. The number of PLS latent variables was optimized by leave-one-out cross-validation utilizing prediction residual error sum of square (PRESS). The proposed model exhibited a high ability for prediction of amylose concentration in both standard starch samples and real rice samples prepared from different regions of Iran. The relative errors of prediction were almost lower than ±5% for different real samples and the detection limit was 3.23 weight percent of amylose in rice. In comparison to the reference method (Juliano method), the proposed method is simpler and does not need tedious sample preprocessing steps.     

Novel coated-graphite membrane sensor based on N,N′-dimethylcyanodiaza-18-crown-6 for the determination of ultra-trace amounts of lead

A novel selective membrane electrode for determination of ultra-trace amount of lead was prepared. The PVC membrane containing N,N′-dimethylcyanodiaza-18-cown-6 (DMCDA18C6) directly coated on a graphite electrode, exhibits a Nernstian response for Pb²⁺ ions over a very wide concentration range (from 1.0×10⁻² to 1.0×10⁻⁷ M) with a limit of detection of 7.0×10⁻⁸ M (∼14.5 ppb). It has a fast response time of ∼10 s and can be used for at least 2 months without any major deviation in potential. The electrode revealed very good selectivity with respect to all common alkali, alkaline earth, transition and heavy metal ions. The proposed sensor was used as an indicator electrode in potentiometric titration of lead ions and in determination of lead in edible oil, human hair and water samples. The proposed sensor was found to be superior to the best Pb²⁺-selective electrodes reported in terms of detection limit and selectivity coefficient.     

Optimization of polymeric triiodide membrane electrode based on clozapine-triiodide ion-pair using experimental design

Central composite design (CCD) and response surface methodology (RSM) were developed as experimental strategies for modeling and optimization of the influence of some variables on the performance of a new PVC membrane triiodide ion-selective electrode. This triiodide sensor is based on triiodide-clozapine ion-pair complexation. PVC, plasticizers, ion-pair amounts and pH were investigated as four variables to build a model to achieve the best Nernstian slope (59.9 mV) as response. The electrode is prepared by incorporating the ion-exchanger in PVC matrix plasticized with 2-nitrophenyl octal ether, which is directly coated on the surface of a graphite electrode. The influence of foreign ions on the electrode performance was also investigated. The optimized membranes demonstrate Nernstian response for triiodide ions over a wide linear range from 5.0 x 10(-6) to 1.0 x 10(-2)mol L(-1) with a limit of detection 2.0 x 10(-6) mol L(-1) at 25 degrees C. The electrodes could be used over a wide pH range 4-8, and have the advantages of easy to prepare, good selectivity and fast response time, long lifetime (over 3 months) and small interferences from hydrogen ion. The proposed electrode was successfully used as indicator electrode in potentiometric titration of triiodide ions and ascorbic acid.     

A numerical solution of a two-dimensional IHCP

In this paper, we will first study the existence and uniqueness of the solution of a two-dimensional inverse heat conduction problem (IHCP) which is severely ill-posed, i.e., the solution does not depend continuously on the data. We propose a stable numerical approach based on the finite-difference method and the least-squares scheme to solve this problem in the presence of noisy data. We prove the convergence of the numerical solution, then to regularize the resultant ill-conditioned linear system of equations, we apply the Tikhonov regularization 0th, 1st and 2nd method to obtain the stable numerical approximation to the solution. The stability and accuracy of the scheme presented is evaluated by comparison with the Singular Value Decomposition (SVD) method.     

An Efficient One‐Pot,Four‐Component Synthesis of {[(1H‐1,2,3‐Triazol‐4‐yl)methoxy]phenyl}‐1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione Derivatives

The 1‐{[(1H‐1,2,3‐Triazol‐4‐yl)methoxy]phenyl}‐1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione derivatives 5 were synthesized by a simple and efficient method, i.e., by the four‐component, one‐pot condensation reaction of phthalohydrazide 4 , a (propargyloxy)benzaldehyde 1 , an active methylene compound 3 (malononitrile or ethyl cyanoacetate), and an azide 2 in the presence of Cu(OAc)₂/sodium L ‐ascorbate as catalyst and 1‐methyl‐1H‐imidazolium trifluoroacetate ([Hmim](CF₃COO)) as an ionic‐liquid medium in good to excellent yields (Scheme 1).     

Improved double-gate armchair silicene nanoribbon field-effect-transistor at large transport bandgap

The electrical characteristics of a double-gate armchair silicene nanoribbon field-effect-transistor(DG ASi NR FET)are thoroughly investigated by using a ballistic quantum transport model based on non-equilibrium Green's function(NEGF) approach self-consistently coupled with a three-dimensional(3D) Poisson equation. We evaluate the influence of variation in uniaxial tensile strain, ribbon temperature and oxide thickness on the on-off current ratio, subthreshold swing, transconductance and the delay time of a 12-nm-length ultranarrow ASi NR FET. A novel two-parameter strain magnitude and temperature-dependent model is presented for designing an optimized device possessing balanced amelioration of all the electrical parameters. We demonstrate that employing Hf O2 as the gate insulator can be a favorable choice and simultaneous use of it with proper combination of temperature and strain magnitude can achieve better device performance.Furthermore, a general model power(GMP) is derived which explicitly provides the electron effective mass as a function of the bandgap of a hydrogen passivated ASi NR under strain.     

Asymmetric cross-aldol reaction of isatin and ketones catalyzed by crude earthworm extract as efficient biocatalyst

ABSTRACT

The asymmetric cross-aldol reaction of simple ketones (acetone, cyclohexanone) with isatin derivatives in the presence of crude extract from earthworms as green and effective biocatalyst proceeds easily in MeCN/H₂O (1:1) as solvent to afford 3-hydroxy-2-oxindoles derivatives. Ten compounds were synthesized in high yields (62–88%) and moderate ee (29–42%). Structure of the synthesized compounds has been characterized on the basis of NMR spectra and CHN analysis. The ee of the obtained compounds was determined by chiral phase HPLC analysis.