Spectrophotometric determination of beryllium in water samples after micelle-mediated extraction preconcentration

A new micelle-mediated phase preconcentration method for preconcentration of ultra-trace quantities of beryllium as a prior step to its determination by spectrophotometry has been developed. Chrome Azurol S (CAS) and cetyltrimethylammonium bromide (CTAB) were used as chelating agent and cationic surfactant, respectively. The method evaluates and eliminates the blank bias error present in such procedures using mean centering of ratio spectra. This procedure gives more accurate results than the traditional approach using absorbance values against reagent blank. The optimal extraction and reaction conditions were studied and the analytical characteristics of the method (e.g., limit of detection, linear range, preconcentration and improvement factors) were obtained. Linearity was obeyed in the range of 0.9-18.0 ng mL⁻¹ (1.00 × 10⁻⁷-2.00 × 10⁻⁶ mol L⁻¹) of beryllium. The detection limit of the method is 0.51 ng mL⁻¹ (5.66 × 10⁻⁸ mol L⁻¹) of beryllium. The interference effect of some anions and cations was also tested. The method was applied to the determination of beryllium in spring water samples.     

Design,synthesis and antibacterial activity evaluation of novel 2-(4-((1-aryl-1H-1,2,3-triazol-4-yl)methoxy)phenyl)2-(2-oxoazetidin-1-yl)acetamide derivatives

In this paper, a novel series of 2-(4-((1-aryl-1H-1,2,3-triazol-4-yl)methoxy)phenyl)2-(2-oxoazetidin-1-yl)acetamide derivatives are synthesized in two steps. The first step involved Ugi multicomponent reaction of β-alanine, o-(propargyl)benzaldehyde and isocyanide derivatives. The product of this step, underwent a click 1,3-dipolar cycloaddition reaction with benzyl azide derivatives. The 2-(4-((1-aryl-1H-1,2,3-triazol-4-yl)methoxy)phenyl)2-(2-oxoazetidin-1-yl)acetamide product was characterized and their antibacterial activities were evaluated against various G-positive (Staphylococcus aureus and Bacillus subtilis) and G-negative (Pseudomonas aeruginosa and Escherichia coli) bacteria, using minimal inhibition concentration. The compounds showed very good antimicrobial activity and a number of products have been more active than ciprofloxacin.     

Neue Derivate der 2-Acylamino-thiophen-(und-benzo[b]thiophen-)-3-carbonsäure sowie des ([1]Benzo-)Thieno[2,3-d]-pyrimidin-4(3H)-ons

The title substances1 and2 were prepared by acylation of the corresponding ethyl 2-amino-thiophene- (or:-4,5,6,7-tetrahydro-benzo[b]thiophene)-3-carboxylates, in some cases followed by reactions introducing a basic substituent.Additionally a group of 2-aroylamino-thiophene-(or:-4,5,6,7-tetrahydro-benzo[b]thiophene)-3-carboxamides was subjected to ring closure reactions, yielding the corresponding 2-aryl-thieno[2,3-d]pyrimidin-4(3H)-ones and 2-aryl-[1]benzothieno[2,3-d]pyrimidin-4(3H)-ones (both:3).

---

---

Zum Teil unter Mitarbeit vonFerdinand Fuhrmann     

Separation of peptides and proteins by capillary electrophoresis using acidic buffers containing tetraalkylammonium cations and cyclodextrins

A method for improving separations of peptides and other positively charged species in capillary zone electrophoresis with untreated capillaries using acidic buffers containing tetraalkylammonium cations is described. Tetramethylammonium and tetrabutylammonium cations dynamically modify the capillary surface, leading to a reversal in the direction of the electroosmotic flow. As a result, the adsorption of positively charged peptides and proteins is minimized, and resolution and peak capacity are improved as the migration of cationic analytes is counterbalanced by the electroosmotic flow. The combining effect of reversing electroosmotic flow and cyclodextrin inclusion complexation on separations of closely related peptides and a protein mixture, as well as tryptic digest of hemoglobin is demonstrated.     

Fuzzy model prediction of Co (III)Al2O3 catalytic behavior in Fischer-Tropsch synthesis

The application of Co(Ⅲ)/Al2O3 catalyst in Fischer-Tropsch synthesis(FTS)was studied in a wide range of synthesis gas conversions and compared with Fuzzy Simulation results.Present study applies fuzzy model to predicting the product composition of CH4,CO2 and CO in Fischer-Tropsch process for natural gas synthesis,in which the input vector was 4-dimension including four variables(operating pressure, operating temperature,time and CO/H2 ratio)of 70 different experiments and the output product is a composition of CO2,CO and CH4. The Mamdani algorithm has been applied to the training of the fuzzy system and the test set was used to evaluate the performance of the system including R2,ARE,AARE and SD.The results demonstrated that the predicted values from the model were in good consistency with the experimental data.The work indicates how fuzzy inference system(FIS),as a promising predicting technique,would be effectively used in FTS.     

Simultaneous kinetic spectrophotometric determination of Cu(II), Co(II) and Ni(II) using partial least squares (PLS) regression

A partial least squares (PLS-1) calibration model based on kinetic—spectrophotometric measurement, for the simultaneous determination of Cu(II), Ni(II) and Co(II) ions is described. The method was based on the difference in the rate of the reaction between Co(II), Ni(II) and Cu(II) ions with 1-(2-pyridylazo)2-naphthol in a pH 5.8 buffer solution and in micellar media at 25°C. The absorption kinetic profiles of the solutions were monitored by measuring the absorbance at 570 nm at 2 s intervals during the time range of 0–10 min after initiation of the reaction. The experimental calibration matrix for the partial least squares (PLS-1) model was designed with 30 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 0.1-2 μg mL⁻¹ for each cation. The proposed method was successfully applied to the simultaneous determination of Cu(II), Ni(II) and Co(II) ions in water and in synthetic alloy samples.      

Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) for nickel(II) ions

A highly sensitive and selective fluorimetric optode membrane for the determination of ultra trace amounts of Ni²⁺ ions was prepared. The plasticized PVC-membrane incorporating potassium tetrakis(p-chlorophenyl)borate (KTpClPB) and 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) (TTBB), as a highly fluorescent chromoionophore, displays a calibration response for Ni²⁺ ions over a wide concentration range of 1.0×10⁻³ to 1.0×10⁻⁸ M. It has a relatively fast response of <40 s. In addition to high stability and reproducibility, and relatively long working lifetime, the sensor possesses good selectivity for nickel ions over several common diverse ions. The fluorescence signal of the optode membrane can be easily recovered by immersion in EDTA solution. The optode was applied successfully to the determination of traces of Ni²⁺ ion in edible oil and a wastewater sample from nickel electroplating industries.     

Iodine‐Catalyzed Friedlander Quinoline Synthesis under Solvent‐Free Conditions

Polyfunctional quinolines were synthesized using Friedlander method catalyzed by molecular iodine in high yields at 60 °C under solvent‐free conditions.     

Mercuric chloride adsorption on sulfur-containing BC2N nanotube: toward HSAB concept

Electronic sensitivity of pristine and sulfur-containing BC₂N nanotubes to mercuric chloride (HgCl₂) molecule was investigated by utilizing density functional theory. It was found that HgCl₂ is weakly adsorbed on the tube, releasing energy of 6.4–8.1 kcal/mol, and electronic properties of the tube are not significantly changed. To overcome this problem, carbon atoms of the tube were substituted by sulfur atom. Of interest are sulfur derivative functional adsorbents because of their strong affinity toward mercury. This observation may be explained based on the Pearson’s hard–soft acid–base theory. It was demonstrated that the S-doped tube can not only strongly adsorb the HgCl₂ molecule, but also may effectively detect its presence due to drastic increment of the tube electrical conductivity.     

Risk perceptions and rationality in measures of risk

Individuals may have biased perceptions of health and safety risks. We conjecture perceptions of mortality risk from various risk measures using parametric and non-parametric methods. We investigate how risk perceptions are measured and what rational explanations can be found for these measures with implication for risk and solvency.