Synthesis,characterization of Schiff base metal complexes and their biological investigation

A new Schiff base ligand named (E)‐2‐(((3‐aminophenyl)imino)methyl)phenol (HL) was prepared through condensation reaction of m‐phenylenediamine and 2‐hydroxybenzaldehyde in 1:1 molar ratio. The new ligand was characterized by elemental analysis and spectral techniques. The coordination behavior of a series of transition metal ions named Cr (III), Mn (II), Fe (III), Co (II), Ni (II), Cu (II), Zn (II) and Cd (II) with the newly prepared Schiff base ligand (HL) is reported. The nature of bonding and the stereochemistry of the complexes have been deduced from elemental analyses, IR, UV–Vis, ¹H NMR, mass, electronic spectra, magnetic susceptibility and conductivity measurements and further their thermal stability was confirmed by thermogravimetric analysis (TG). From IR spectra, it was observed that the ligand is a neutral tridentate ligand coordinates to the metal ions through protonated phenolic oxygen, azomethine nitrogen and nitrogen atom of NH₂ group. The existence, the number and the position of the water molecules was studied by thermal analysis. The molecular structures of the Schiff base ligand (HL) and its metal complexes were optimized theoretically and the quantum chemical parameters were calculated. The synthesized ligand and its complexes were screened for antimicrobial activities against bacterial species (Staphylococcus aureus and Bacillis subtilis, (gram positive bacteria)), (Salmonella SP., Escherichia coli and Pseudomonas aeruginosa, (gram negative bacteria)) and fungi (Aspergillus fumigatus and Candida albicans). The complexes were found to possess high biological activities against different organisms. Molecular docking was used to predict the efficiency of binding between Schiff base ligand (HL) and both receptors of Escherichia coli (3 T88) and Staphylococcus aureus (3Q8U). The receptor of Escherichia coli (3 T88) showed best interaction with Schiff base ligand (HL) compared to receptor of Staphylococcus aureu (3Q8U).     

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

IR and Raman spectra of two layered aluminium phosphates Co(en)3Al3P4O16 · 3H2O and [NH4]3[Co(NH3)6]3[Al2(PO4)4]2 · 2H2O

The FT IR and FT Raman spectra of Co(en)₃Al₃P₄O₁₆ · 3H₂O (compound I) and [NH₄]₃[Co(NH₃)₆]₃[Al₂(PO₄)₄]₂ · 2H₂O (compound II) are recorded and analysed based on the vibrations of Co(en)₃³⁺, Co(NH₃)₆³⁺, NH₄⁺, Al---O---P, PO₃, PO₂ and H₂O. The observed splitting of bands indicate that the site symmetry and correlation field effects are appreciable in both the compounds. In compound I, the overtone of CH₂ deformation Fermi resonates with its symmetric stretching vibration. The NH₄ ion in compound II is not free to rotate in the crystalline lattice. Hydrogen bonding of different groups is also discussed.     

Thermal analysis of phenylethynyl end-capped fluorinated imide oligomer afr-pepa-4

Thermal analysis of phenylethynyl end-capped imide oligomer AFR-PEPA-4 was performed to characterize cure reaction, thermal stabilities and semicrystalline behavior of AFR-PEPA-4 oligomer and its cured polyimide. Cured AFR-PEPA-4 polyimide showed high T _gs up to 418°C. Both AFR-PEPA-4 oligomer and polyimide exhibit excellent thermal stabilities comparable to PETI-5 polyimides. AFR-PEPA-4 imide oligomer has a T _m of 330°C and exhibits spherulite crystalline morphology in the film. The crystallinity in AFR-PEPA-4 films could not be regenerated under any annealing conditions after the initial melt.     

Photosensitizers derived from 132-oxo-methyl pyropheophorbide-a: enhanced effect of indium(III) as a central metal in in vitro and in vivo photosensitizing efficacy

The effects of an additional keto group on absorption wavelength and the corresponding metal complexes Zn(II), Cu(II) In(III) on singlet oxygen production and photodynamic efficacy were examined among the alkyl ether analogs of pyropheophorbide-a. For the preparation of the desired photosensitizers, the methyl 13(2)-oxo-pyropheophorbide-a obtained by reacting methyl pyropheophorbide-a with aqueous LiOH-THF was converted into a series of alkyl ether analogs. These compounds were evaluated for photophysical properties and in vitro (by means of the MTT assay and intracellular localization in RIF cells) and in vivo (in C3H mice implanted with RIF tumors) photosensitizing efficacy. Among the alkyl ether derivatives, the methyl 3-decyloxyethyl-3-devinyl-13(2)-oxo-pyropheophorbide-a was found to be most effective and the insertion of In(III) into this analog further enhanced its in vitro and in vivo photosensitizing efficacy. Fluorescence microscopy showed that, in contrast to the hexyl and dodecyl ether derivatives of HPPH (which localize in mitochondria and lysosomes, respectively), the diketo-analogs and their In(III) complexes localized in Golgi bodies. The preliminary in vitro and in vivo results suggest that, in both free-base and metalated analogs, the introduction of an additional keto group at the five-member exocyclic ring in pyropheophorbide-a diminishes its photosensitizing efficacy. This may be due to a shift in subcellular localization from mitochondria to the Golgi bodies. The further introduction of In(III) enhances photoactivity, but not by shifting the localization of the photosensitizer.     

Elusive Double Perovskite Iodides: Structural,Optical, and Magnetic Properties

Halide double perovskites [A₂M^IM^IIIX₆] are an important class of materials that have garnered substantial interest as non-toxic alternatives to conventional lead iodide perovskites for optoelectronic applications. While numerous studies have examined chloride and bromide double perovskites, reports of iodide double perovskites are rare, and their definitive structural characterization has not been reported. Predictive models have aided us here in the synthesis and characterization of five iodide double perovskites of general formula Cs₂NaLnI₆ (Ln=Ce, Nd, Gd, Tb, Dy). The complete crystal structures, structural phase transitions, optical, photoluminescent, and magnetic properties of these compounds are reported.     

Lanthanum(III) and uranyl(VI) diglycolamide complexes: synthetic precursors and structural studies involving nitrate complexation

The synthesis and structural characterization of lanthanum(III) and uranyl(VI) complexes coordinated by tridentate diglycolamide (DGA) ligands O(CH2C(O)NR2)2[R=i-Pr (L1), i-Bu (L2)] are described. Reaction of L with UO2Cl2(H2O) n forms the uranyl(VI) cis-dichloride adducts UO2Cl2L [L=L1 (1a), L2 (1b)], while reaction of excess L with the corresponding metal nitrate hydrate produces [LaL3][La(NO3)6] [L=L1 (2a), L2 (2b)] for lanthanum and UO2(NO3)2L [L=L1 (3a), L2 (3b)] for uranium. Compounds 2b and 3a have been structurally characterized. The solid-state structure of the cation of 2b shows a triple-stranded helical arrangement of three tridentate DGA ligands with approximate D3 point-group symmetry, while the counteranion consists of six bidentate nitrate ligands coordinated around a second La center. The solid-state structure of 3a shows a tridentate DGA ligand coordinated along the equatorial plane perpendicular to the OUO unit as well as two nitrate ligands, one bidentate and oriented in the equatorial plane and the other monodentate and oriented parallel to the uranyl unit with the oxygen donor atom situated above the mean equatorial plane. Ambient-temperature NMR spectra for 3a and 3b indicated an averaged chemical environment of high symmetry consistent with fluxional nitrate hapticity, while spectroscopic data obtained at -30 degrees C revealed lower symmetry consistent with the slow-exchange limit for this process.     

High resolution electronic spectroscopy of p-vinylphenol in the gas phase

A recent controversy regarding the proper assignment of two closely spaced bands in the S₁ ← S₀ electronic transition of trans-p-coumaric acid (pCA) has been addressed by recording their spectra at full rotational resolution. The results show unambiguously that the carrier of these two bands is p-vinylphenol (pVP), a thermal decomposition product of pCA. The two bands belong to two conformers of pVP; trans-pVP at 33,207.3 cm⁻¹ and cis-pVP at 33,211.8 cm⁻¹.     

Automatic analysis of mixed spectra : Generalised spectral subtraction applied to electron spin resonance spectroscopy

A new technique is described for estimating the pure component spectra from a set of linearly independent spectra. The process is one of generalised spectral subtraction in which an iterative combination of multivariate linear least-squares analysis and matrix transformation is applied to the input data to give estimates of the number of independent components in the original mixed spectra. This technique is applicable to bipolar data (e.g. from e.p.r. spectra) as well as absorption spectra determined by any spectroscopic technique, provided that the spectra may be reasonably assumed to be an additive mixture of unknown pure components. Numerical model examples are given together with an experimental application to electron spin resonance.