Chemical activation of carbon mesophase pitches

This paper studies the chemical activation of mesophase pitches of different origins in order to obtain activated carbons suitable for use as electrodes in supercapacitors. The effect that the activating agent (NaOH, LiOH, and KOH), the alkaline hydroxide/pitch ratio, and the activation temperature had on the characteristics of the resultant activated carbons was studied. LiOH was found to be a noneffective activating agent, while activation with NaOH and KOH yielded activated carbons with high apparent surface areas and pore volumes. The increase of the KOH/pitch ratio caused an increase of the chemical attack on the carbon, producing higher burnoffs and development of porosity. Extremely high apparent surface areas were obtained when the petroleum pitch was activated with 5:1 KOH/carbon ratio. The increase of the activation temperature caused an increase of the burnoff, although the differences were not as significant as those derived from the use of different proportions of activating agent.     

The mechanism of the gas-phase elimination kinetics of the β,γ-unsaturated aldehyde 2,2–dimethyl-3-butenal: a theoretical study

The study on the mechanism of the gas-phase elimination or thermal decomposition kinetics of 2, 2-dimethyl-3-butenal has been carried out by using theoretical calculation at MP2, combined ab initio CBSQB3 and DFT (B3LYP, B3PW91, MPW1PW91, PBEPBE, PBE1PBE, CAMB3LYP, M06, B97d) levels of theory. A good reasonable agreement between experimental and calculated parameters was obtained by using CAMB3LYP/6-311G(d,pd) calculations. The contrasted calculated parameters against experimental values suggested decarbonylation reaction to proceed through a concerted five-membered cyclic transition state type of mechanism, involving the hydrogen transfer from the carbonyl carbon to the gamma carbon, consistent with observed kinetic isotope effect. The breaking of alpha carbon–carbonyl carbon bond to produce carbon monoxide is 50% advanced in the transition state. The reaction mechanism may be described as a concerted moderately non-synchronous process. Examination of the Atoms in Molecules (AIM) analysis of electron density supports the suggested mechanism.     

Kinetics and mechanisms of gas‐phase decarbonylation of α‐methyl‐trans‐cinamaldehyde and E‐2‐methyl‐2‐pentenal under homogeneous catalysis of hydrogen chloride

The kinetics of the gas‐phase elimination of α‐methyl‐trans‐cinamaldehyde catalyzed by HCl in the temperature range of 399.0–438.7 °C, and the pressure range of 38–165 Torr is a homogeneous, molecular, pseudo first‐order process and undergoing a parallel reaction to produce via (A) α‐methylstyrene and CO gas and via (B) β‐methylstyrene and CO gas. The decomposition of substrate E‐2‐methyl‐2‐pentenal was performed in the temperature range of 370.0–410.0 °C and the pressure range of 44–150 Torr also undergoing a molecular, pseudo first‐order reaction gives E‐2‐pentene and CO gas. These reactions were carried out in a static system seasoned reactions vessels and in the presence of toluene free radical inhibitor. The rate coefficients are given by the following Arrhenius expressions:

• Products formation from α‐methyl‐trans‐cinamaldehyde
• α‐methylstyrene :
• β‐methylstyrene :
• Products formation from E‐2‐methyl‐2‐pentenal
• E‐2‐pentene :

The kinetic and thermodynamic parameters for the thermal decomposition of α‐methyl‐trans‐cinamaldehyde suggest that via (A) proceeds through a bicyclic transition state type of mechanism to yield α‐methylstyrene and carbon monoxide, whereas via (B) through a five‐membered cyclic transition state to give β‐methylstyrene and carbon monoxide. However, the elimination of E‐2‐methyl‐2‐pentenal occurs by way of a concerted cyclic five‐membered transition state mechanism producing E‐2‐pentene and carbon monoxide. The present results support that uncatalyzed α‐β‐unsaturated aldehydes decarbonylate through a three‐membered cyclic transition state type of mechanism. Copyright © 2014 John Wiley & Sons, Ltd.     

Single-fiber diffuse optical time-of-flight spectroscopy

We demonstrate interstitial diffuse optical time-of-fight spectroscopy based on a single fiber for both light delivery and detection. Detector saturation due to the massive short-time reflection is avoided by ultrafast gating of a single photon avalanche diode. We show that the effects of scattering and absorption are separable and that absorption can be assessed independently of scattering. Measurements on calibrated liquid phantoms and subsequent Monte Carlo-based evaluation illustrate that absorption coefficients can be accurately assessed over a wide range of medically relevant optical properties. Our findings pave the way to simplified and less invasive interstitial in vivo spectroscopy.     

Experimental demonstration of subcarrier multiplexed quantum key distribution system

We provide, to our knowledge, the first experimental demonstration of the feasibility of sending several parallel keys by exploiting the technique of subcarrier multiplexing (SCM) widely employed in microwave photonics. This approach brings several advantages such as high spectral efficiency compatible with the actual secure key rates, the sharing of the optical fainted pulse by all the quantum multiplexed channels reducing the system complexity, and the possibility of upgrading with wavelength division multiplexing in a two-tier scheme, to increase the number of parallel keys. Two independent quantum SCM channels featuring a sifted key rate of 10 Kb/s/channel over a link with quantum bit error rate <2% is reported.     

Ultrafast molecular rotor: an efficient sensor for premelting of natural DNA

Structural changes in nucleic acids in the premelting region (T < melting temperature, T(m)) play an important role in the biological activity of DNA at physiological temperature. In the present communication we report the use of an ultrafast molecular rotor as an extrinsic fluorescence sensor to monitor the structural changes in natural DNA at T < T(m), which could not be detected even by circular dichroism spectroscopy. Further, the fluorescence sensor used in the present study is superior than most commonly used DNA stains.     

Theoretical study of methoxy group influence in the gas‐phase elimination kinetics of methoxyalkyl chlorides

The unimolecular gas‐phase elimination kinetics of 2‐methoxy‐1‐chloroethane, 3‐methoxy‐1‐chloropropane, and 4‐methoxyl‐1‐chloroburane has been studied by using density functional theory (DFT) methods to propose the most reasonable mechanisms of decomposition of the aforementioned compounds. Calculation results of 2‐methoxy‐1‐chloroethane and 3‐methoxy‐1‐chloropropane suggest dehydrochlorination through a concerted nonsynchronous four‐centered cyclic transition state (TS) to give the corresponding olefin. In the case of 4‐methoxyl‐1‐chloroburane, in addition to the 1,2‐elimination mechanism, the anchimeric assistance by the methoxy group, through a polar five‐centered cyclic TS, provides additional pathways to give 4‐methoxy‐butene, tetrahydrofuran and chloromethane. The bond polarization of the C? Cl, in the direction of C^δ+ ··· Cl^δ?, is the limiting step of these elimination reactions. The significant increase in rate together with the formation of a cyclic product tetrahydrofuran in the gas‐phase elimination of 4‐methoxyl‐1‐chloroburane is attributed to neighboring group participation of the oxygen of the methoxy group in the TS. The theoretical calculations show a good agreement with the reported experimental results. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

The Equilibrium Measure for a Nonlocal Dislocation Energy

In this paper we characterize the equilibrium measure for a nonlocal and anisotropic weighted energy describing the interaction of positive dislocations in the plane. We prove that the minimum value of the energy is attained by a measure supported on the vertical axis and distributed according to the semicircle law, a well-known measure that also arises as the minimizer of purely logarithmic interactions in one dimension. In this way we give a positive answer to the conjecture that positive dislocations tend to form vertical walls. This result is one of the few examples where the minimizer of a nonlocal energy is explicitly computed and the only one in the case of anisotropic kernels. © 2018 Wiley Periodicals, Inc.     

Synchronous whirling of spinning homogeneous elastic cylinders: linear and weakly nonlinear analyses

Nonlinear Dynamics - Stationary whirling of slender and homogeneous (continuous) elastic shafts rotating around their axis, with pin–pin boundary condition at the ends, is revisited by...     

Synthesis of Symmetrical and Nonsymmetrical Polyenes by Iterative and Bidirectional Palladium-Catalyzed Cross-Coupling Reactions

Bifunctional unsaturated reagents designed to undergo palladium-catalyzed cross-coupling reactions with complementary polyenyl connective fragments are highly useful for the undoubtedly challenging synthesis of polyenes. The current toolkit of building blocks for the bidirectional formation of Csp²−Csp² single bonds of polyenes includes homo-bisfunctionalized reagents with equal or unequal reactivity (due to steric and/or electronic factors), and hetero-bisfunctionalized counterparts containing either two different nucleophiles, two electrophiles or one of these functionalities and a latent nucleophile that can be unmasked when desired. The combination of these bifunctional linchpin reagents using tactics that modulate the reactivity of each terminus in order to achieve the required connection have streamlined the synthesis of polyenes of great complexity using (iterative) cross-coupling methods for Csp²−Csp² bond formation. Reaction conditions for the Pd-catalyzed cross-coupling reactions are mild and functional-group-tolerant, and therefore these protocols allow to construct the polyene structures using shorter unsaturated reactants with the desired geometries, since in general the products preserve the stereochemical information of the connected cross-coupling partners.