Substituted γ-lactones. XXX. Reactions of α-Keto-β-Subtituted-γ-butyrolactones with diamines

The condensation reaction between α-keto-β-aroyl (or acyl) -γ-butyrolactones, 4a-4e and o-phenylenediamine or 2, 3-diaminonaphthalene leads under retrograde aldol condensation involving loss of formaldehyde to formation of 3-substituted-3, 4-dihydro-2 (1H) quinoxalinones or benzo [g] quinoxalinones, 7a-7g , respectively as a new convenient synthesis of this type of heterocyclic systems. The reaction of type 4 compound with 4, 5-diaminopyromidine, 8 , was found to proceed differently. 2-[(4-Amino-5-pyrimidinyl)amine]-4-oxo-3-(hydroxymethyl)-4-phenyl-2-butenoic acid 9 was the only product formed when the reaction between 4a and 8 was run in ethanol. The same reaction in glacial acetic acid proceeds with loss of formaldehyde, to afford 7-phenacylidene-7,8-dihydro-6 (1H)-pteridione 10 . The reaction between type 4 compounds and ethylenediamine or 1, 4-phenylenediamine leads to the formation of the bis-condensation products 13–15 , respectively.     

Tuning the Thermal Stability and Photoisomerization of Azoheteroarenes through Macrocycle Strain**

Azobenzene and its derivatives are one of the most widespread molecular scaffolds used in a range of modern applications, as well as in fundamental research. After photoexcitation, azo-based photoswitches revert back to the most stable isomer on a timescale ( ) that determines the range of potential applications. Attempts to bring to extreme values prompted the development of azobenzene and azoheteroarene derivatives that either rebalance the E- and Z-isomer stabilities, or exploit unconventional thermal isomerization mechanisms. In the former case, one successful strategy has been the creation of macrocycle strain, which tends to impact the E/Z stability asymmetrically, and thus significantly modify . On the bright side, bridged derivatives have shown an improved optical switching owing to the higher quantum yields and absence of degradation. However, in most (if not all) cases, bridged derivatives display a reversed thermal stability (more stable Z-isomer), and smaller than the acyclic counterparts, which restricts their potential interest to applications requiring a fast forward and backwards switch. In this paper, the impact of alkyl bridges on the thermal stability of phenyl-azoheteroarenes is investigated by using computational methods, and it is revealed that it is indeed possible to combine such improved photoswitching characteristics while preserving the regular thermal stability (more stable E-isomer), and increased values under the appropriate connectivity and bridge length.     

Synthesis and reactivity of the Tl1 salts of

Synthons Tl1[TCNE]*- (1) and Tl12[TCNE]2- (2), for [TCNE]*- and [TCNE]2-, respectively, in metathesis reactions have been quantitatively prepared and characterized. The structure of 1 was solved and refined in a monoclinic unit cell at 27 degrees C [C2/c, a = 12.6966 (12) angstroms, b=7.7599 (7) angstroms, c=15.5041 (15) angstroms, beta = 96.610 (5) degrees , V= 1517.4 (2) angstroms3, Dcalcd = 2.911 gcm-3, Z=8, R1 = 0.0575, omegaR2=0.0701] and exhibits nuCN absorptions at 2,191 (s) and 2,162 (s) cm-1 consistent with metal-bound [TCNE]*-. The structure of 1 consists of a distorted square antiprismatic octacoordinate Tl1 bound to six monodentate [TCNE]*-s with TlN separations ranging from 2.901 to 3.171 angstroms averaging 3.020 angstroms, and one bidentate [TCNE]*- with TlN separations averaging 3.279 angstroms. The TlN bonding is attributed to electrostatic bonding. The [TCNE]*-s form dimerized zigzag chains with intra- and interdimer separations of 2.87 and 3.29 angstroms, respectively. The tight pi-[TCNE](2)2- dimer is diamagnetic and has the shortest intradimer [TCNE]*- distance reported. These synthons for [TCNE]*- and [TCNE]2- in metathesis reactions lead to the precipitation of, for example, TlIX (X = Cl, Br, OAc). Reaction of 1 with MnIII(porphyrin)X (X = Cl, OAc) forms the molecule-based magnets of [MnIII(porphyrin)][TCNE] composition, while the reaction of [CrI(C6H6)2]Br and (Me2N)2CC(NMe2)2Cl2, [TDAE]Cl2, with 1 forms [CrI(C6H6)2] [TCNE] and [TDAE][TCNE]2, respectively. The structure of [TDAE][TCNE]2.MeCN was solved and refined in an orthorhombic unit cell at 21 degrees C [I222, a = 10.2332(15), b = 13.341(6), c = 19.907(8) angstroms, V= 2717.7 angstroms3, Z = 4; Dcalcd = 1.216 gcm-3, R=0.083, Romega = 0.104] and exhibits upsilonCN absorptions at 2,193 (m), 2,174 (s), and 2,163 (s) cm-1 consistent with isolated [TCNE](2)2- , in contrast to the aforementioned TlI bound [TCNE](2)2-. The reaction of 2 with [TDAE]Cl2 forms [TDAE]2+[TCNE]2-.     

TOPEM,a new temperature modulated DSC technique

TOPEM is a new temperature modulated DSC technique, introduced by Mettler-Toledo in late 2005, in which stochastic temperature modulations are superimposed on the underlying rate of a conventional DSC scan. These modulations consist of temperature pulses, of fixed magnitude and alternating sign, with random durations within limits specified by the user. The resulting heat flow signal is analysed by a parameter estimation method which yields a so-called ‘quasi-static’ specific heat capacity and a ‘dynamic’ specific heat capacity over a range of frequencies. In a single scan it is thus possible to distinguish frequency-dependent phenomena from frequency-independent phenomena. Its application to the glass transition is examined here.     

Arsenic extraction and speciation in carrots using accelerated solvent extraction, liquid chromatography and plasma mass spectrometry

Arsenic present in freeze-dried carrots was extracted using accelerated solvent extraction (ASE). Several parameters, including selection of the dispersing agent, extraction time, number of extraction cycles, particle size and extraction temperature, were evaluated to optimize the ASE method. Filtering and treatment with C-18 SPE cartridges were also evaluated as part of the sample preparation procedure before speciation analysis. The method was validated by spiking single arsenical and mixed arsenical standards on the dispersing agent and on portions of freeze-dried carrot prior to extraction. LC-ICP-MS was used to determine individual arsenic species in the carrot extracts. A weak anion-exchange column was used for the separation of As(III), As(v), monomethylarsonic acid (MMA), dimethylarsinic acid and arsenobetaine. Optimized sample preparation conditions were applied to the extraction of arsenic in nine freeze-dried carrot samples. Total arsenic concentration in the carrot samples ranged from less than 20 ng g(-1) to 18.7 microg g(-1), dry mass. Extraction efficiency, defined as the ratio of the sum of individual arsenic species concentrations to total arsenic, ranged from 80 to 102% for freeze-dried carrots with arsenic concentrations greater than the limit of quantitation. Inorganic As(III) and As(v) were the only species found in samples that contained less than 400 ng g(-1) total arsenic. MMA and an unidentified arsenic compound were present in some of the samples with higher total arsenic content.     

Synthese und Struktur von Ruthenium(II)‐Komplexen mit Triazenido‐ und Pentaazadienido‐Liganden

Synthesis and Crystal Structure of Ruthenium(II) Complexes with Triazenido and Pentaazadienido Ligands The ruthenium(II) triazenido complex [RuCl(ClC₆H₄N₃C₆H₄Cl)(p‐cymene)] ( 1 ) is obtained by the reaction of silver bis(p‐chlorphenyl)triazenid with [RuCl₂(p‐cymene)]₂ in CH₂Cl₂, and forms air stable, orange yellow crystals. It crystallizes as 1 ·CH₂Cl₂ in the orthorhombic space group Pbca with the lattice parameters a = 3134.3(3), b = 2105.7(2), c = 769.15(4) pm and Z = 8. In the diamagnetic mononuclear complex 1 the chelating triazenido ligand coordinates with the atoms N(1) and N(3). p‐Cymene binds η⁶ with its C₆ ring. The reaction of the etherphosphane complex [RuCl₂(Ph₂PCH₂C₄H₇O₂)₂] with 1, 3‐bis(p‐tolyl)triazenid in THF yields the complex [RuCl(tolyl‐N₃‐tolyl)(Ph₂PCH₂C₄H₇O₂)₂] ( 2 ). 2 forms monoclinic, red crystals with the space group P2₁/c and a = 1521.0(2), b = 1451.8(2), c = 2073.7(2) pm, β = 99.29(1)° and Z = 4. It is air stable and diamagnetic. The triazenide ion coordinates with the atoms N(1) and N(3). One of the two etherphosphane ligands is chelating and coordinates with the P atom and one O atom, while the other ligand binds in a monodentate fashion with its P atom, resulting in a coordination number of six for the Ru^II. [Ag(tolyl‐N₅‐tolyl)]₂ reacts in THF with [RuCl₂(C₆H₆)]₂ to afford the air stable, diamagnetic pentaazadienido complex [RuCl(tolyl‐N₅‐tolyl)(C₆H₆)] ( 3 ). 3 forms monoclinic, red crystals with the space group P2₁/c and a = 1462.4(1), b = 1056.51(8), c = 1371.4(1) pm, β = 114.36(1)° and Z = 4. The chelating pentaazadienido ligand coordinates with the atoms N(1) and N(3) at the divalent Ru atom. The benzene molecule binds η⁶ with its π system.     

Intramolecular allyl transfer reaction from allyl ether to aldehyde groups: experimental and theoretical studies

The intramolecular transfer of the allyl group of functionalized allyl aryl ethers to an aldehyde group in the presence of Ni0 complexes was studied from chemical, electrochemical and theoretical points of view. The chemical reaction involves the addition of Ni0 to the allyl ether followed by stoichiometric allylation. The electrochemical process is catalytic in nickel and involves the reduction of intermediate eta3-allylnickel(II) complexes.     

(C5M2-n)(n-) (M = Li,Na, K,and n = 0, 1, 2). A new family of molecules containing planar tetracoordinate carbons

By highly correlated ab initio methods and DFT calculations, we have shown that alkaline metals can stabilize planar tetracoordinate carbon-containing molecules with the C(C4) skeleton. This family of molecules is C5M2, where M is an alkaline metal. The stability of these compounds is rationalized in terms of the delocalization of the p-orbital perpendicular to the molecular plane, the global hardness, and the electrophilicity. The analysis of several molecular scalar fields shows that the bonding between the C52- dianion and the metals is strongly ionic. The structures reported are the first examples with a planar tetracoordinate carbon, surrounded by carbon atoms, and stabilized, only, by electronic factors.     

Synthesis and Reactivity of π‐Electron‐Deficient (Arylsulfonyl)acetates

Different π‐electron‐deficient (arylsulfonyl)acetates 9 were synthesized (Scheme 1, Table 1), and their behavior as soft nucleophiles in the dialkylation reaction under phase‐transfer catalysis conditions was studied (Schemes 2 and 3, Tables 2 and 3). The [3,5‐bis(trifluoromethyl)phenyl]sulfonyl group was shown to be the best substituent for the stereoselective synthesis of (E)‐aconitates 18 via an alkylation hydro‐sulfonyl‐elimination integrated process under very mild phase‐transfer‐catalysis conditions (Scheme 5, Table 4). Sulfonylacetates 9h , i also underwent smooth Diels‐Alder reactions with acyclic and cyclic dienes via in situ formation of the appropriate dienophile through a Knoevenagel condensation with paraformaldehyde (Scheme 6). Reductive desulfonylation with Zn and NH₄Cl in THF was shown to be an efficient method for removal of the synthetically useful sulfonyl moiety (Scheme 7).     

Study of the reactivity of ketone enolates with 3-halo-2-amino derivatives of benzo[b]thiophene under photostimulated sRN1 reaction conditions

Reactivity of the 3-halo-2-amino derivatives of benzo[6]thiophene 1a-c and 2 with several ketone enolates 3–5 have been studied under photostimulated S_RN1 reaction conditions. The normal substitution product 6 only was obtained in low yields using potassioacetophenone 3 as the enolate ion and 2-(tert-butoxycarbonylamino)-3-chlorobenzo[b]thiophene ( 1a ) and 2-(tert-butoxycarbonylamino)-3-iodobenzo[b]thiophene ( 1c ) as substrates. In all reactions the main product was the corresponding dehalogenated substrate 7a-b , thus indicating that reduction of the substrate strongly competes with the desired substitution reaction.