Effect of calcium and carbonate concentrations on cationic membrane fouling during electrodialysis

Fouling, which is the accumulation of undesired solid materials at the phase interfaces of permselective membranes, is one of the major problems in electrodialysis. The aim of the present work was to investigate the effect on the fouling of cation-exchange membranes of the composition in calcium and carbonate of a model solution to be treated by electrodialysis. No fouling was observed at 400 and 800 mg/L of CaCl(2) in the absence of carbonate, while at only 400 mg/L CaCl(2) with carbonate, a deposit was observed. This difference could be explained by the buffering capacity of the carbonate, which affects the treatment duration with and without sodium carbonate. Since the duration was longer with carbonate, more calcium ions were able to migrate across the CMX-S membrane, which explained the higher deposit on its surface. Furthermore, whether there was carbonate in the solution treated by electrodialysis or not, the deposit on the surface of the cationic membrane was calcium hydroxide. However, this fouling formed during conventional ED was easily cleaned by an acid procedure.     

Simple chip-based interfaces for on-line monitoring of supramolecular interactions by nano-ESI MS

Two simple interfaces were designed and realized, enabling on-line coupling of microfluidics reactor chips to a nanoflow electrospray ionization (NESI) time-of-flight (TOF) mass spectrometer (MS). The interfaces are based on two different approaches: a monolithically integrated design, in which ionization is assisted by on-chip gas nebulization, and a modular approach implying the use of commercially available Picospray tips. Using reserpine as a reference compound in a 1ratio1 mixture of acetonitrile and water revealed that both interfaces provide a remarkably stable mass spectrometric signal (standard deviations lower than 8% and 1% for the monolithic and modular approaches, respectively). Glass microreactors, containing mixing zones, were fabricated and coupled to the modular interface with perfluoroelastomer Nanoport fluidics connectors, providing a tool to study chemical reactions on-line. Investigation of the mixing dynamics showed that complete on-chip reagents mixing is achieved within a few tens of milliseconds. Metal-ligand interactions of Zn-porphyrin with pyridine (2), 4-ethylpyridine (3), 4-phenylpyridine (4), N-methylimidazole (5), and N-butylimidazole (6) in acetonitrile as well as host-guest complexations of beta-cyclodextrin (7) with N-(1-adamantyl)acetamide (8) or 4-tert-butylacetanilide (9) in water were studied by mass spectrometry using the modular NESI-chip interface. From on-chip dilution-based mass spectrometric titrations of Zn-porphyrin 1 with pyridine (2) or 4-phenylpyridine (4) in acetonitrile Ka-values of 4.6 +/- 0.4 x 10(3) M(-1) and 6.5 +/- 1.2 x 10(3) M(-1), respectively, were calculated. The Ka-values are about four times larger than those obtained with UV/vis spectroscopy in solution, probably due to a higher ionization efficiency of complexed compared to uncomplexed Zn-porphyrin. For the complexation of N-(1-adamantyl)acetamide (8) with beta-cyclodextrin (7), a Ka-value of 3.6 +/- 0.3 x 10(4) M(-1) was obtained, which is in good agreement with that determined by microcalorimetry.     

Comparison of antibody and albumin catalyzed hydrolysis of steroidalp-nitrophenylcarbonates

A monoclonal antibody (MAb) was produced against thep-nitrophenylphosphate derivative of 3α,5β-lithocholic acid, a transition-state analog for hydrolysis of a steroidalp-nitrophenylcarbonate. The indicated reaction was catalyzed by this Ab with kinetic constants k_cat = 4.0 × 10^-2min and K_m = 3.3 μM at pH 9.0 and 35°C. The Ab also hydrolyzed the isomericp-nitrophenylcarbonate of 3β,5β-lithocholic acid with k_cat = 8.4 × 10^-2/min and K_m = 1.0 μM. Bovine serum albumin (BSA) was found to catalyze the same reactions with similar turnover rates and Michaelis constants of 15 and 14 μM, respectively. Although the BSA-catalyzed reaction was only weakly inhibited by the phosphate ester TSA (IC₅₀ ca. 40 μM), the Ab-catalyzed reaction was completely inhibited at less than 1 μM of the TSA. The relative rates and efficiencies of the MAbcatalyzed and BSA-catalyzed reactions are discussed in the context of the hydrophobic sites and intrinsic reactivity of the protein surfaces, and the induction of groups on the Ab to enhance the enzymatic function.     

State-constrained control problems with neither coercivity norL 1 bounds on the controls

Summary A state-constrained, nonlinear, minimum problem is considered with dynamics depending sublinearly on a control which is not bounded in theL ¹ norm. Because of the lack of coercivity, the value map fails to be continuous, even in the unconstrained case. However, we prove that under suitable assumptions—which guarantee the continuity of the value maps of the problems withL ¹-bounded controls—the value map is upper semicontinuous and solves a Bellman equation with a continuous Hamiltonian. Moreover, the map obtained by by replacing its values at the horizon t=T with the values of the cost function turns out to be the maximal subsolution of the corresponding value problem. Entrata in Redazione il 31 dicembre 1997.     

Influence of doped anions on poly(3,4-ethylenedioxythiophene) as hole conductors for iodine-free solid-state dye-sensitized solar cells

Poly(3,4-ethylenedioxythiophene) (PEDOT) is an excellent hole-conducting polymer able to replace the liquid I(-)/I3(-) redox electrolyte in dye-sensitized solar cells (DSCs). In this work we applied the in situ photoelectropolymerization technique to synthesize PEDOT and carried out a careful analysis of the effect of different doping anions on overall solar cell performance. The anions analyzed in this work are ClO4(-), CF3SO3(-), BF4(-), and TFSI(-). The best solar cell performance was observed when the TFSI(-) anion was used. Photoelectrochemical and impedance studies reveal that the doped anions in the PEDOT hole conductor system have great influences on I-V curves, conductivity, and impedance. The optimization of these parameters allowed us to obtain an iodine-free solid-state DSC with a maximum J(sc) of 5.3 mA/cm2, V(oc) of 750 mV, and a conversion efficiency of 2.85% which is the highest efficiency obtained so far for an iodine-free solid-state DSC using PEDOT as hole-transport material.     

Anisotropic Photoluminescence of Poly(3-hexyl thiophene) and Their Composites with Single-Walled Carbon Nanotubes Highly Separated in Metallic and Semiconducting Tubes

In this work, the effect of the single-walled carbon nanotubes (SWNTs) as the mixtures of metallic and semiconducting tubes (M + S-SWNTs) as well as highly separated semiconducting (S-SWNTs) and metallic (M-SWNTs) tubes on the photoluminescence (PL) of poly(3-hexyl thiophene) (P3HT) was reported. Two methods were used to prepare such composites, that is, the chemical interaction of the two constituents and the electrochemical polymerization of the 3-hexyl thiophene onto the rough Au supports modified with carbon nanotubes (CNTs). The measurements of the anisotropic PL of these composites have highlighted a significant diminution of the angle of the binding of the P3HT films electrochemical synthetized onto Au electrodes covered with M + S-SWNTs. This change was attributed to metallic tubes, as was demonstrated using the anisotropic PL measurements carried out on the P3HT/M-SWNTs and P3HT/S-SWNTs composites. Small variations in the angle of the binding were reported in the case of the composites prepared by chemical interaction of the two constituents. The proposed mechanism to explain this behavior took into account the functionalization process of CNTs with P3HT. The experimental arguments of the functionalization process of CNTs with P3HT were shown by the UV-VIS-NIR and FTIR spectroscopy as well as surface-enhanced Raman scattering (SERS). A PL quenching process of P3HT induced both in the presence of S-SWNTs and M-SWNTs was reported, too. This process origins in the various de-excitation pathways which can be developed considering the energy levels diagram of the two constituents of each studied composite.     

The Antimicrobial Activity of Origanum vulgare L. Correlated with the Gastrointestinal Perturbation in Patients with Metabolic Syndrome

(1) The metabolic syndrome (MS) promotes acute and chronic infections, due to the pro-inflammatory condition given by TNFα and IL6 or by affecting the microbiota. MS is also correlated with insulin resistance, causing inflammation and infections throughout the organism. (2) The purpose of this study was to track the effect of using the essential oil of Origanum vulgare L. (EOO) as an antibacterial treatment, compared to allopathic treatment with antibiotics in MS patients. A group of 106 people with MS was divided into four subgroups: L1—staphylococcal infection group, L2—Escherichia coli infection group, L3—streptococcal infection group with EOO treatment, and CG—control group without infection or treatment. (3) EOO is responsible for the antibacterial effect, and reduced minor uncomplicated infections. After a 10-day treatment, intestinal side effects were absent, improving the phase angle. (4) The results suggest that EOO may exhibit an antibacterial effect, similar to the antibiotic treatment, without promoting MS-specific dysbiosis, and it also improves the phase angle in patients, which is used as an index of health and cellular function.     

Ocimum campechianum Mill. from Amazonian Ecuador: Chemical Composition and Biological Activities of Extracts and Their Main Constituents (Eugenol and Rosmarinic Acid)

The essential oil (EO), the methanolic (MeOH), and the 70% ethanolic (70% EtOH) extracts obtained from the aerial parts of Ocimum campechianum Mill. (Ecuador) were chemically characterized through gas-chromatography coupled to mass spectrometry detector (GC-MS), high-performance liquid chromatography coupled to diode array-mass spectrometry detectors (HPLC-DAD-MS) and studied for their in vitro biological activity. The radical scavenger activity, performed by spectrophotometric 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) assays, highlighted significant IC₅₀ values for the EO, extracts and their main constituents (eugenol and rosmarinic acid). EO (and eugenol) showed noteworthy activity against Pseudomonas syringae pv. syringae and a moderate effect against clinical Candida strains, with possible synergism in association to fluconazole against the latter microorganisms. The extracts and pure molecules exhibited weak cytotoxic activity against the HaCat cell line and no mutagenicity against Salmonella typhimurium TA98 and TA100 strains, giving indication of safety. Instead, EO showed a weak activity against adenocarcinomic human alveolar basal epithelial cells (A549). The above-mentioned evidence leads us to suggest a potential use of the crude drug, extracts, and EO in cosmetic formulation and food supplements as antioxidant agents. In addition, EO may also have a possible application in plant protection and anti-Candida formulations.     

Biocompatible water-in-oil emulsion as a model to study ascorbic acid effect on lipid oxidation

A biocompatible water-in-oil (W/O) emulsion has been used as a model to study the effect of ascorbic acid (AA) on the oxidation of the oil (glycerol trioleate, GTO) continuous phase. The model system consisted of 3 wt % water dispersed in GTO containing 0.5 wt % sodium oleate (NaO)/oleic acid (OA) mixture (NaO/OA = 20/80 mol/mol %) as a stabilizer. To study the ascorbic acid effect on GTO light-promoted oxidation, we added aqueous solutions of ascorbic acid to GTO in place of distilled water. Results obtained as peroxide values show that ascorbic acid activity depends on its concentration and it is affected by the characteristics of the W/O interface. In the presence of ascorbyl palmitate (AP) or sorbitan trioleate (Span 85) in the continuous phase, ascorbic acid activity increases in the first few hours of oxidation. The effect of ascorbic acid has been related to emulsion structure by calculating characteristic parameters of the droplet size distributions by means of optical microscopy.