Phenolic content,antioxidant and anti-inflammatory activities of Tunisian Diplotaxis simplex (Brassicaceae)

This study investigates the polyphenol content of Diplotaxis simplex extract and the biological activities of the main organ. The analysed extracts showed that polyphenol contents varied considerably as a function of organs. Furthermore, novel biological activities of this species were assessed. Flower extracts exhibit a potent in vitro antioxidant capacity using oxygen radical absorbance capacity and displayed a strong anti-inflammatory activity, inhibiting nitric oxide release, by 79.3% at 160 μg/mL. Our findings suggested that the Diplotaxis flower is a valuable source of antioxidants and anti-inflammatory agents.     

Fabrication and characterization of bimetallic Pt-Au nanowires supported on FSM-16 and their catalytic activities toward water-gas shift reaction

A facile, previously unexplored, method to synthesize bimetallic Pt-Au nanowires (20nm diameter×120-170nm long) on mesoporous FSM-16 (2.7nm) was fabricated by co-impregnation of H(2)PtCl(6) with HAuCl(4) followed by evacuation at 300K and finally exposure to the CO/H(2)O gas mixture (60:5Torr) at 323K for 1.0h. On the other hand, spherical monometallic nanoparticles of pure Pt (7.0nm diameter) and Au (7-26nm diameter) were synthesized as well, by impregnation, at the same reaction conditions. The catalysts were characterized by in situ FTIR spectroscopy, UV-vis absorption spectroscopy, TEM, TPR and TPCOR. The catalytic activities toward the water-gas shift reaction (WGSR) were also examined under atmospheric pressure and at the margin of 323-373K. The optical absorption spectra showed a remarkable shift and broadening of Pt-Au surface Plasmon resonance band at 515nm apart from those of individual analogue emphasizing bimetallic formation. Results from in situ FTIR spectroscopy indicated that incorporation of Au assisted and stabilized the formation of carbonyl clusters of Pt-Au-CO (2084cm(-1)) and Pt-CO (1888cm(-1)) inside the host FSM-16. The Pt-Au carbonyl clusters built up at the moment of vanishing the linear carbonyl band of the charged Au (Au(+)-CO, 2186cm(-1)) along with a concomitant increase in the reduced gold (Au(0)-CO, 2124cm(-1)) species. TPR profiles showed that the H(2) consumed was higher for Pt/FSM-16 than for Pt-Au/FSM-16 verifying the facile reduction of Pt moieties after addition of Au. The CO adsorption peak maximum, in TPCOR, for Pt/FSM-16 occurred at higher temperature than that of Pt-Au/FSM-16, which exhibited higher amounts of CO(2) produced. The relative decrease in CO bindings on bimetallic surface was responsible for increasing the CO oxidation activity mainly through an association mechanism. Accordingly, the activity of Pt-Au/FSM-16 towards WGS showed a marked increase (8-23 times) compared with those of monometallics emphasizing the dependence of this reaction on the electronic defects of the nanowires. A straightforward reduction mechanism was deduced for Pt-Au alloy formation in view of the results obtained.     

Assisted intramolecular proton transfer in (uracil)2Ca2+ complexes

The structure and relative stability of the complexes between uracil dimers and Ca²⁺, as well as the proton transfer (PT) processes within these dimers, have been investigated by the density functional theory methods. Although in uracil dimers PT occurs as an almost synchronous double PT processes that connect the diketo dimer with a keto-enol dimer, the process within the most stable (uracil)₂Ca²⁺ complexes is much more complicated, and the product of the reaction looks like the result of an intramolecular PT from one of the NH groups of one monomer to one of the carbonyl groups of the same monomer. An analysis of the force profile along the reaction coordinate shows that the intimate mechanism implies three elementary steps, two intermolecular PTs, and an in-plane displacement of one monomer with respect to the other. The result of this so-called assisted intramolecular proton transfer is the formation of a dimer in which only one monomer is a keto-enol derivative, the other monomer being apparently unchanged, although it suffers significant structural rearrangements along the reaction coordinate. Quite importantly, this dimer is significantly stabilized upon Ca²⁺ association; therefore, while the most stable uracil dimers correspond systematically to associations involving only the diketo forms, in (uracil)₂Ca²⁺ complexes the most stable structures correspond to those in which one of the monomers is a keto-enol uracil isomer.     

Purification and Biochemical Characterization of a Highly Thermostable Xylanase from <Emphasis Type="Italic">Actinomadura</Emphasis> sp. Strain Cpt20 Isolated from Poultry Compost

An extracellular thermostable xylanase from a newly isolated thermophilic Actinomadura sp. strain Cpt20 was purified and characterized. Based on matrix-assisted laser desorption–ionization time-of-flight mass spectrometry analysis, the purified enzyme is a monomer with a molecular mass of 20,110.13 Da. The 19 residue N-terminal sequence of the enzyme showed 84% homology with those of actinomycete endoxylanases. The optimum pH and temperature values for xylanase activity were pH 10 and 80 °C, respectively. This xylanase was stable within a pH range of 5–10 and up to a temperature of 90 °C. It showed high thermostability at 60 °C for 5 days and half-life times at 90 °C and 100 °C were 2 and 1 h, respectively. The xylanase was specific for xylans, showing higher specific activity on soluble oat-spelt xylan followed by beechwood xylan. This enzyme obeyed the Michaelis–Menten kinetics, with the K _m and k _cat values being 1.55 mg soluble oat-spelt xylan/ml and 388 min⁻¹, respectively. While the xylanase from Actinomadura sp. Cpt20 was activated by Mn²⁺, Ca²⁺, and Cu²⁺, it was, strongly inhibited by Hg²⁺, Zn²⁺, and Ba²⁺. These properties make this enzyme a potential candidate for future use in biotechnological applications particularly in the pulp and paper industry.     

Simultaneous collinear and non-collinear parametric generation in 1D single grating periodically poled lithium tantalate

We report a detailed study of multiple wavelengths optical parametric generation in a single grating one-dimensional periodically poled lithium tantalate crystal. Simultaneous collinear and non-collinear generations are observed around the pump collinear direction. Similar spectra are found in continuous spatial positions symmetrical to the collinear direction, with decreasing signal and increasing idler wavelengths, associated with decreasing powers when the far-field angle increases. A phase matching scheme is proposed to describe these interactions. Numerical simulations emphasize the agreement of our phase matching scheme with the experimental results. Single-pass gain and high pump power density are very likely at the origin of the simultaneous collinear and non-collinear QPM interactions.     

An inverse source problem for a two dimensional time fractional diffusion equation with nonlocal boundary conditions

We consider the inverse source problem for a time fractional diffusion equation. The unknown source term is independent of the time variable, and the problem is considered in two dimensions. A biorthogonal system of functions consisting of two Riesz bases of the space L²[(0,1) × (0,1)], obtained from eigenfunctions and associated functions of the spectral problem and its adjoint problem, is used to represent the solution of the inverse problem. Using the properties of the biorthogonal system of functions, we show the existence and uniqueness of the solution of the inverse problem and its continuous dependence on the data. Copyright © 2012 John Wiley & Sons, Ltd.     

A Lyapunov functional for a triangular reaction–diffusion system with nonlinearities of exponential growth

The aim of this work is to study the global existence of solutions to a triangular system of reaction–diffusion equations, which describes epidemiological or chemical situations. On the basis of the construction of a suitable Lyapunov functional, we show that for any initial data, classical global solutions exist even when the nonlinearities are of exponential growth. Copyright © 2012 John Wiley & Sons, Ltd.     

Nonlinear finite-element modeling of graphene and single- and multi-walled carbon nanotubes under axial tension

An effective finite-element (FE) approach for modeling the structure and the deformation of single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) is presented. An individual tube was modeled using a frame-like structure with beam elements. The effect of van der Waals forces, crucial in MWCNTs, was modeled by spring elements. The success of this new carbon nanotube (CNT) modeling approach was verified by comparing the simulation results for single- and multi-walled nanotubes and graphene with other experimental and computational results available in the literature. Simulations of final deformed configurations were in excellent agreement with the atomistic models for various deformations. The proposed approach successfully predicts the experimentally observed values for mechanical behavior of SWCNTs and MWCNTs. The results demonstrated that the proposed FE technique could provide a valuable tool for studying the mechanical behavior of different types of nanotubes, as well as their effectiveness as load-bearing entities in nanocomposite materials.     

Distributed high-temperature pressure sensing using air-hole microstructural fibers

We present spatially resolved Rayleigh scattering measurements in different polarization-maintaining (PM) fibers for high-temperature pressure sensing. The pressure-induced birefringence in the fiber cores is interrogated using polarization-resolved frequency-swept interferometry. The pressure responses of a PM photonic crystal fiber and a twin-air-hole PM fiber are investigated for a pressure range of 0 to 13.8 MPa (0-2000 psi) at room temperature and at temperatures as high as 800 °C. The proposed sensing system provides, for the first time to our knowledge, a truly distributed pressure-sensing solution for high-temperature applications.     

Folding model description of reactions with exotic nuclei

Microscopic folding calculations based upon the effective M3Y nucleon-nucleon interaction and the nuclearmatter densities of the interacting nuclei have been carried out to explain recently measured experimental data of the ⁶He+¹²⁰Sn elastic scattering cross section at four different laboratory energies near the Coulomb barrier. The extracted reaction cross sections are also considered.