Silphox [POCl3−n (SiO2) n ] as a New,Efficient, and Heterogeneous Reagent for the Synthesis of Benzimidazole Derivatives Under Microwave Irradiation

Silphox [POCl_3-n(SiO₂)_n] efficiently catalyzes the condensation of benzene-1,2-diamine with mono and dicarboxylic acids under microwave irradiation to afford benzimidazole derivatives in high yields and short reaction times.     

AB INITIO MOLECULAR ORBITAL STUDY OF 1,2-DITHIANE AND 1,2,4,5-TETRATHIANE

Ab initio calculations at HF/6-31+G? level of theory for geometry optimization, and MP2/6-31+G?//HF/6-31+G? and B3LYP/6-31+G?//HF/6-31+G? levels for a single-point total energy calculation, are reported for the chair and twist conformations of 1,2-dithiane (1), 3,3,6,6-tetramethyl-1,2-dithiane (2), 1,2,4,5-tetrathiane (3), and 3,3,6,6-tetramethyl-1,2,4,5-tetrathiane (4). The C₂ symmetric chair conformations of 1 and 2 are calculated to be 21.9 and 8.6 kJ mol^?1 more stable than the corresponding twist forms. The calculated energy barriers for chair-to-twist processes in 1 and 2 are 56.3 and 72.8 kJ mol^?1, respectively. The C_2h symmetric chair conformation of 3 is 10.7 kJ mol^?1 more stable than the twist form. Interconversion of these forms takes place via a C₂ symmetric transition state, which is 67.5 kJ mol^?1 less stable than 3-Chair. The D₂ symmetric twist-boat conformation of 4 is calculated to be 4.0 kJ mol^?1 more stable than the C_2h symmetric chair form. The calculated strain energy for twist to chair process is 61.1 kJ mol^?1.     

Spectral and Thermal Studies of Some New Metal Complexes Derived from N-[(Phenylamino)Thioxomethyl] Hydrazinocarbonyl Methyl Pyridinium Chloride (PTHMPC)

New metal complexes derived from the reaction of N-[(phenylamino)thioxomethyl] hydrazino carbonyl methyl pyridinium chloride (H₂L; PTHMPC) with some metal salts of the general formula MX₂ [(X = Cl^? and/or CH₃COO^?; M = Cd(II), UO₂(II), Mn(II) and Zr(IV)] were synthesized and characterized by elemental analyses, spectral analyses (IR, UV-vis., ¹H NMR), thermal analyses (TGA, DTG), and conductance and magnetic measurements. The results showed that the ligand exists in metal complexes either in the keto form or in the enol form. Moreover, the IR spectral data suggest that the acetate ion behaves in a monodentate manner. Semi-empirical calculations ZINDO/1, PM3, and AM1 have been used to study the molecular geometry and the harmonic vibrational spectra of the ligand and its metal complexes with the purpose of assisting the experimental assignment of the complexes. Generally, there is an agreement between the observed and the calculated spectra. Finally, the thermodynamic parameters (ΔE*, ΔH, ΔG, and ΔS) have been calculated from the data of thermal analyses (TGA and DTG).

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Preparation and Characterization of New Optically Active Poly(amide-imide)s from N,N′-(bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetra carboxylic)-bis-L-isoleucine and Aromatic Diamines

Five new optically active aromatic poly(amide-imide)s (PAIs) 5a–e were prepared from a direct polycondensation reaction of a new diacid of N,N′-(bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetra carboxylic)-bis-L-isoleucine 3 with various aromatic diamines 4a–e in a medium consisting of triphenyl phosphite (TPP), calcium chloride (CaCl₂), pyridine (Py) and N-methyl-2-pyrrolidone (NMP). The polycondensation reaction produced a series of novel poly(amid-imide)s 5a–e in quantitative yields with inherent viscosities of 0.39–0.51 dL/g. The resulting polymers were fully characterized by means of ¹H-NMR, FT-IR spectroscopy, elemental analyses, inherent viscosity, solubility test, specific rotation and thermal properties of them were investigated using TGA/DTG and differential scanning calorimeter (DSC). The diacid 4 was synthesized by the condensation reaction of bicyclo[2,2,2]oct-7-ene-2,3,5,6- tetracarboxylic dianhydride 1 with L-isoleucine 2 in acetic acid solution.     

New 5-bromo-2-hydroxybenzaldehyde S-ethylisothiosemicarbazone and its mixed-ligand Cu(II) complex with imidazole: synthesis, characterization and DFT calculation

A new Schiff base ligand of 5-bromo-2-hydroxybenzaldehyde S-ethyl-isothiosemicarbazone (H₂L) was synthesized and its mixed-ligand Cu(II) complex was also prepared by reaction of Cu(NO₃)₂·3H₂O with H₂L and imidazole. Their structures were fully characterized by elemental analysis, FT-IR, molar conductivity and UV-Vis methods. The analytical data suggest that the metal, H₂L and imidazole ratios in the Schiff base complex are 1:1:1. Single crystal diffraction was also used to better understand the molecular structure of the Cu(II) complex. The results of physico-chemical analyses of the Schiff base complex reveal the coordination geometry around the central atom is square planar. The H₂L ligand (NNO donor) is coordinated to the metal center as a tridentate bionegatively agent. Another position of the square planar geometry is occupied by the imidazole ligand. Furthermore, computational studies of the new complex were performed by carrying out DFT calculations. Geometry optimization and natural band analysis of the complex is discussed in further detail.      

Synthesis and antitumor activity evaluation of some 1, 2, 4-triazine and fused triazine derivatives

Reactions of 3-hyrazino-5,6-diphenyl-1,2,4-triazine with various carbonyl compounds such as ethyl acetoacetate, acetylacetone, benzoin, isatin, phthalic anhydride, phenyl isocyanate and acetic anhydride were discussed. Its reactions with α, β unsaturated compounds such as arylidinemalononitrile, diethyl acetylenedicarboxylate, dibenzylidine hydrazine were studied. These reactions led to the formation of various triazine and fused-triazine derivatives. The antitumor activity of the synthesized compounds was tested against HePG2 and MCF-7 cell lines. Some of the tested compounds were most active, whereas other compounds exhibited little or no activity.     

Conversion of biomass residual to acid-modified bio-chars for efficient adsorption of organic pollutants from industrial phosphoric acid: an experimental,kinetic and thermodynamic study

ABSTRACT

This study reports the removal of organic matters from phosphoric acid using waste-produced bio-charcoal structures. Particularly, the freshly made bio-char species via pyrolysis and two sub-driven acids activated charcoals were applied during the removal process. The treated charcoal with hydrochloric and nitric acids had attained a higher adsorption rate for organic matters than that of the non-treated one. Removal percentages of 70% and 60% were, respectively, attained by acid-modified chars. The kinetics of the adsorption process was fitted via pseudo-first/second-order and Morris–Weber models. The thermodynamic parameters of the presented sorption process indicate that organic matter removal has been endothermic, physical and spontaneous.     

New polypyrrole–carbon nanotubes–silicon dioxide solid‐phase microextraction fiber for the preconcentration and determination of benzene,toluene, ethylbenzene,and o‐xylene using gas liquid chromatography

For the first time, a polypyrrole–carbon nanotubes–silicon dioxide composite film coated on a steel wire was prepared by an electrochemical method. Scanning electron microscopy images showed that this composite film was even and porous. The prepared fiber was used as an absorbent for the headspace solid‐phase microextraction of benzene, toluene, ethylbenzene, and o‐xylene, followed by gas chromatographic analysis. This method presented an excellent performance, which was much better than that of a polypyrrole–carbon nanotube fiber. It was found that under the optimized conditions, the linear ranges were 0.01–200 ng/mL with correlation coefficients >0.9953, the detection limits were 0.005–0.020 ng/mL, the relative standard deviations were 3.9–6.4% for five successive measurements with a single fiber, and the reproducibility was 5.5–8.5% (n = 3). Finally, the developed method was successfully applied to real water samples, and the relative recoveries obtained for the spiked water samples were from 91.0 to 106.7%.     

CuO–Fe2O3 nanoparticles embedded onto reduced graphene oxide nanosheets: a high-performance nanocomposite anode for Li-ion battery

Journal of Solid State Electrochemistry - The development of safe, fast charging, and long-lasting Li-ion batteries has been taking major steps forward through novel combinations of nanomaterials....     

Coating Cellulosic Material with Ag Nanowires to Fabricate Wearable IR-Reflective Device for Personal Thermal Management: The Role of Coating Method and Loading Level

Textiles coated with silver nanowires (AgNWs) are effective at suppressing radiative heat loss without sacrificing breathability. Many reports present the applicability of AgNWs as IR-reflective wearable textiles, where such studies partially evaluate the parameters for practical usage for large-scale production. In this study, the effect of the two industrial coating methods and the loading value of AgNWs on the performance of AgNWs-coated fabric (AgNWs-CF) is reported. The AgNWs were synthesized by the polyol process and applied onto the surface of cotton fabric using either dip- or spray-coating methods with variable loading levels of AgNWs. X-ray diffraction, scanning electron microscopy (SEM), infrared (IR) reflectance, water vapor permeability (WVP), and electrical resistance properties were characterized. The results report the successful synthesis of AgNWs with a 30 μm length. The results also show that the spray coating method has a better performance for reflecting the IR radiation to the body, which increases with a greater loading level of the AgNWs. The antibacterial results show a good inhibition zone for cotton fabric coated by both methods, where the spray-coated fabric has a better performance overall. The results also show the coated fabric with AgNWs maintains the level of fabric breathability similar to control samples. AgNWs-CFs have potential utility for cold weather protective clothing in which heat dissipation is attenuated, along with applications such as wound dressing materials that provide antibacterial protection.