High-performance 850 nm vertical-cavity surface-emitting laser in Gigabit Ethernet network

High-performance oxide vertical-cavity surface-emitting (VCSEL) laser is fabricated, and its usefulness is demonstrated as a suitable transmitting light source at 850 nm operating wavelength for Gigabit Ethernet application. Utilization of barrier reduction layers reveals low-threshold current requirement for operation at high modulation bandwidth. The electrical and optical characteristics, measured from the fabricated VCSEL, are simulated for Gigabit Ethernet transmission. Data rates of 1.25 Gbps with a bit error rate of 10⁻¹¹ are achieved by the use of a specific multimode network simulator.     

Cost function sensitivity to small parameter variations for a class of distributed control systems

Control systems governed by linear parabolic evolution partial differential equations in the case of quadratic cost functions are considered. Sensitivity of the performance of the optimal systems to small parameter variations is studied. It is proved that the cost function sensitivity is the same if the optimal control is implemented in open-loop form or in feedbeck form.     

Synthesis of a cyclic peptide containing norlanthionine: effect of the thioether bridge on peptide conformation

Two diastereomeric analogues of ring C of nisin incorporating a novel norlanthionine residue have been synthesized via a triply orthogonal protecting group strategy. A full structural study was carried out by NMR, which elucidated the conformational properties of the two peptides and enabled the identity of each diastereoisomer to be proposed.     

Beneficial Effects of Green Tea Catechins on Female Reproductive Disorders: A Review

Tea is one of the most widely consumed beverages worldwide after water, and green tea accounts for 20% of the total tea consumption. The health benefits of green tea are attributed to its natural antioxidants, namely, catechins, which are phenolic compounds with diverse beneficial effects on human health. The beneficial effects of green tea and its major bioactive component, (−)-epigallocatechin-3-gallate (EGCG), on health include high antioxidative, osteoprotective, neuroprotective, anti-cancer, anti-hyperlipidemia and anti-diabetic effects. However, the review of green tea’s benefits on female reproductive disorders, including polycystic ovary syndrome (PCOS), endometriosis and dysmenorrhea, remains scarce. Thus, this review summarises current knowledge on the beneficial effects of green tea catechins on selected female reproductive disorders. Green tea or its derivative, EGCG, improves endometriosis mainly through anti-angiogenic, anti-fibrotic, anti-proliferative and proapoptotic mechanisms. Moreover, green tea enhances ovulation and reduces cyst formation in PCOS while improving generalised hyperalgesia, and reduces plasma corticosterone levels and uterine contractility in dysmenorrhea. However, information on clinical trials is inadequate for translating excellent findings on green tea benefits in animal endometriosis models. Thus, future clinical intervention studies are needed to provide clear evidence of the green tea benefits with regard to these diseases.     

Interactions between cationic gemini/conventional surfactants with polyvinylpyrrolidone: Specific conductivity and dynamic light scattering studies

The interaction between bis(hexadecyldimethylammonium)hexane dibromide (16-6-16), bis(tetradecyldimethylammonium)hexane dibromide (14-6-14), their conventional counterparts cetyltrimethylammonium bromide (CTAB) and tetradecyltrimethylammonium bromide (TTAB) with polyvinylpyrrolidone (PVP) was investigated using the conductivity technique. The results show that gemini surfactants interact strongly with PVP as compared to conventional surfactants. The results also reveal that the surfactants with shorter hydrocarbon chain interact weakly as those of longer hydrocarbon chain. The interactions of 16-6-16 and 14-6-14 and their conventional counterparts with PVP were also studied using dynamic light scattering (DLS) measurements. We have also highlighted the effect of surfactant–polymer interactions on the dispersion force in the solution. Critical aggregation concentration (cac) and critical micelle concentration (cmc) were obtained using the conductivity data. The degrees of micelle ionization and free energies associated with aggregation, micellization, and transfer have also been evaluated and discussed.     

Ribonucleotide and ribonucleoside determination by ambient pressure ion mobility spectrometry

Detection limits and reduced mobilities for 12 ribonucleotides and 4 ribonucleosides were measured by ambient pressure electrospray ionization-ion mobility spectrometry (ESI-IMS). With the instrument used in this study it was possible to separate some of these compounds within mixtures. Detection limits reported for ribonucleotides and ribonucleosides ranged from 15 to 300 pmol and the reduced mobilities ranged from 41 to 56 suggesting that ambient pressure ESI-IMS may be used for their rapid and sensitive separation and detection. This report demonstrates that it was possible to use ion mobility spectrometry (IMS) to obtain a spectrum for the separation of nucleotides and nucleosides in less than 1 min. The application holds great promise for nucleotide analysis in the area of separating DNA fragments in genome sequencing and also for forensics DNA typing examinations used for the identification of blood stains in crime scenes and paternity testing.     

Rapid preparative isolation of erythrocentaurin from Enicostemma littorale by medium‐pressure liquid chromatography,its estimation by high‐pressure thin‐layer chromatography,and its α‐amylase inhibitory activity

Erythrocentaurin is a relatively simple natural product present among the members of Gentianaceae. A preparative method for the isolation of erythrocentaurin from the ethyl acetate fraction of Enicostemma littorale using medium‐pressure liquid chromatography has been reported. The method consisted of a simple step gradient from 10 to 20% ethyl acetate in n‐hexane. Using a 70 × 460 mm Si60 column, this method is capable of processing 20 g of material in <3 h (purity ≈ 97%). The recovery of erythrocentaurin was 87.77%. Estimation of erythrocentaurin in extracts and fractions based on high‐pressure thin‐layer chromatography was carried out on silica gel 60 F₂₅₄ plates with toluene/ethyl acetate/formic acid (80:18:2 v/v/v) as the mobile phase. The densitometric analysis was performed at 230 nm. A well‐separated compact band of erythrocentaurin appeared at R_f 0.54 ± 0.04. The analytical method showed good linearity in the concentration range of 200–1500 ng/band with a correlation coefficient of 0.99417. The limits of detection and quantification were found to be ≈60 and ≈180 ng/band, respectively. Erythrocentaurin exhibited a concentration‐dependent α‐amylase inhibition (IC₅₀ 1.67 ± 0.28 mg/mL). The outcome of the study should be considered for pharmacokinetic and biotransformation studies involving E. littorale.     

Determination of multiple thermal degradation mechanisms of poly(3-hydroxybutyrate)

The thermal degradation of poly(3-hydroxybutyrate) (PHB) was investigated by kinetic analyses in detail to clarify its complex degradation behavior, resulting in a finding of mixed mechanisms comprising at least a thermal random degradation with subsequent auto-accelerated transesterification, and a kinetically favored chain reaction from crotonate chain ends. The thermal degradation behavior of PHB varied with changes in time and/or temperature. From the kinetic analysis of changes in molecular weight, it was found that a non-auto-catalytic random degradation proceeding in the initial period was followed by an auto-accelerated reaction in the middle period. From the kinetic analysis of weight loss behavior, it is proposed that there are some kinetically favored scissions occurring at the chain ends, where the degradation proceeded by a 0th-order weight loss process in the middle stage. The observed 0th-order weight loss process was assumed to be an unzipping reaction occurring at ester groups neighboring the crotonate end groups.     

Transparent and flexible field emission display device based on single‐walled carbon nanotubes

A fully transparent and flexible field emission device (FED) has been demonstrated. Single‐walled carbon nanotubes (SWCNTs) coated on arylite substrate were used as electron emitters for the FED and a novel metavanadate phosphor coated on the SWCNTs/arylite film was used as transparent and flexible screen. The SWCNTs/arylite based emitters and the SWCNTs/arylite/metal‐vanadate‐based phosphor showed a transmittance value of 92.6% and 54%, respectively. The assembled device also showed satisfactory transparency and flexibility as well as producing significant current. Metavanadate phosphor is considered to be an excellent candidate due to its superior luminescence properties and easy fabrication onto transparent and flexible conductive substrate at room temperature while retaining reasonable transparency of the substrate. Thus, its transparency and flexibility will open the door to next‐generation FEDs. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Understanding the acceleration in the ring-opening of lactones delivered by microwave heating

This paper reports the first detailed study focussed upon identifying the influence that microwave heating (MWH) has upon the mechanic steps involved in the tin catalysed ring-opening of lactones such as ?-caprolactone (CL). Direct comparison of conventional (CH) and microwave (MWH) heated kinetic studies showed that a key factor in the reduction of the polymerisation cycle time with MWH was the elimination of the induction period associated with in situ catalyst manufacture and initiation. NMR studies demonstrated that the most significant mechanistic change contributing to the observed induction time reduction/elimination was faster initiation (i.e., reaction of the initiatior/catalyst complex with the first monomer unit). Consequently, analysis of the dielectric properties of the reaction components predicted that this MWH induced change was related to the selective volumetric heating of both the catalyst and the monomer. Furthermore, this indication of the greater significance of the initiation step in defining the length of the induction period suggests that this is the rate determining step of the process, whether conducted by CH or MWH. Increasing the catalyst concentration was demonstrated to produce significant reductions in reaction heat-up time and to induce a significant (up to 30 °C) overshoot in reaction mixture bulk temperature in with MWH only. Thus supporting the conclusion that selective heating of the organometallic species in the system contributes directly to differences in the reaction conditions and which need to be taken into account when drawing comparisons with CH systems. Consequently, both effects were concluded to be thermally generated from selective volumetric heating.