Dinuclear gold (I)-di-N-heterocyclic carbene complexes: syntheses,structure, density functional theory calculation and photoluminescence study

The synthesis and characterizations for a series of dinuclear gold (I)-di-NHC complexes, 1–8 through the trans-metalation method of their respective silver (I)-di-NHC complexes, i–viii are reported (where NHC = N-heterocyclic carbene). The successful complexation of a series of unusual non-symmetrical and symmetrical di-NHC ligands, 3,3'-(ethane-1,2-diyl)-1-alkylbenzimidazolium-1'-butylbenzimidazolium (with alkyl = methyl, ethyl, propyl, butyl, pentyl, hexyl, heptyl, benzyl) with the gold (I) ions are suggested by elemental analysis, Fourier transform-infrared, ¹H- and ¹³C-NMR data. The ¹³C-NMR spectra of 1–8 show a singlet sharp peak in the range of 190.00–192.00 ppm, indicating the presence of a carbene carbon that bonded to the gold (I) ion. From single crystal X-ray diffraction data, the structure of complex 6 with the formula of [di-NHC-Au (I)]₂·2PF₆ is obtained [where NHC = 3,3'-(ethane-1,2-diyl)-1-hexylbenzimidazolium-1'-butylbenzimidazolium]. The photophysical study in solid state of 6 displays an intense photoluminescence with a strong emission maxima, λ_em = 480 nm, upon excitation at 340 nm at room temperature. Interestingly, the emission maximum at 77 K shows a structural character with a strong peak at 410 nm, a medium at 433 nm and a weak at 387 nm, accompanied by a tail band to about 500 nm.     

Radiation pasteurised oil palm empty fruit bunch fermented with Pleurotus sajor-caju as feed supplement to ruminants

In solid state fermentation, Pleurotus sajor-caju has been found to be able to degrade at least 30% oil palm empty Fruit Bunch (EFB) fibre leaving 70 % useful materials. Conditions under which fermentation carried out were investigated. It was found that, in the temperature range between 25– 28 °C, relative ph between 6–8, moisture between 60–70 % and medium composition of CaCO₃: rice bran 2 %: 5 % were the optimum conditions. The results showed in fermented products that, there were substantial reduction in cellulosic component such as Crude Fiber (CF, 18 %); Acid Detergent Fibre (ADF, 45 %), Neutral Detergent Fibre (NDF, 61 %) and Acid Detergent Lignin (ADL, 14 %). However, Crude Protein (CP, 10%) increased resulted from single cell protein enrichment of mycelial microbial mass. The mass reductions of substrate in fermentation process corresponds to the CO₂ released during fermentation. Hence, attributable to the decreased in content of CF, ADF, NDF, and ADL. The digestibility study has also been carried out to determine the useful level of this product to ruminant. Aflatoxin content was detected low in both the initial substrates and products. Based on nutritional value and low content of aflatoxin, the product is useful as a source of roughage to ruminant.     

10-GHz Optical Comb in L-Band Region With Brillouin/Erbium-Doped Fibre Laser

A multiwavelength Brillouin/erbium fibre laser (BEFL) which operates in the long wavelength (L-band) region is demonstrated for potential applications in an L-band wavelength division multiplexing (WDM) communication system. The laser configuration consists of a long erbium-doped fibre to enable L-band amplification where two 3-dB couplers take a portion of the generated BEFL signal and re-inject it into the single mode fibre to seed a cascaded BEFL line in the same direction as the first BEFL line. A stable and strong laser comb of up to five lines with 10-GHz spacing has been obtained with a Brillouin pump (BP) of 9.2 mW and a 980 nm pump of 92 mW. The BEFL has shown a broad tuning range with a tuning characteristic for line #1 which is flat over a range greater than 9.9 nm.     

Local and global chirality at surfaces: succinic acid versus tartaric acid on Cu110

A detailed comparison of tartaric acid (HOOC-CHOH-CHOH-COOH) and succinic acid (HOOC-CH(2)-CH(2)-COOH) molecules on a Cu(110) surface is presented with a view to elucidate how the two-dimensional chirality exhibited by such robust, chemisorbed systems is affected when both OH groups of the former molecule are replaced with H groups, a stereochemical change that leaves the metal-bonding functionalities of the molecule untouched but destroys both chiral centers. It is found that this change does not significantly affect the thermodynamically preferred chemical forms that are adopted, namely the doubly deprotonated bicarboxylate at low coverages (theta 相似文献   

The structure and crystallization of thin water films on Pt(111)

When water is adsorbed on Pt(111) above 135 K several different ice structures crystallize, depending on the thickness of the ice layer. At low coverage water forms extended islands of ice with a (square root(37) x square root(37))R25(o) unit cell, which compresses as the monolayer saturates to form a (square root(39) x square root(39))R16(o) structure. The square root(39) low-energy electron diffraction (LEED) pattern becomes more intense as the second layer grows, remaining bright for films up of 10-15 layers and then fading and disappearing for films more than ca. 40 layers thick. The ice multilayer consists of an ordered square root(39) wetting layer, on which ice grows as a crystalline film which progressively loses its registry to the wetting layer. Ice films more than ca. 50 layers thick develop a hexagonal LEED pattern, the entire film and wetting layer reorienting to form an incommensurate bulk ice. These changes are reflected in the vibrational spectra which show changes in line shape and intensity associated with the different ice structures. Thin amorphous solid water films crystallize to form the same phases observed during growth, implying that these structures are thermodynamically stable and not kinetic phases formed during growth. The change from a square root(39) registry to incommensurate bulk ice at ca. 50 layers is associated with a change in crystallization kinetics from nucleation at the Pt(111) interface in thin films to nucleation of incommensurate bulk ice in amorphous solid water films more than 50 layers thick.     

Analysis of selected pesticides and alkylphenols in human cord blood by gas chromatograph-mass spectrometer

A total of seven pesticides and eight alkylphenols were monitored using this method for the determination of their trace levels in human cord blood. The pesticides are lindane, diazinon, α-endosulfan, β-endosulfan, endosulfan sulfate, chlorpyrifos and endrin; while the alkylphenols are 4-n-butylphenol, 4-n-pentylphenol, 4-n-hexylphenol, 4-t-octylphenol, 4-n-heptylphenol, nonylphenol, 4-n-octylphenol and bisphenol A. The pesticides and alkylphenols in the cord blood samples were extracted with solid phase extraction IST C18 cartridges and analyzed by selected ion monitoring mode using quadrapole detector in Shimadzu QP-5000 gas chromatograph-mass spectrometer. Trace levels of pesticide and alkylphenols in the range of non-detectable to 15.17 ng ml⁻¹, were detected in the human cord blood samples. This technique of monitoring the levels of endocrine-disruptors in blood samples is consistent, reliable and cost effective while reducing wastage of time and solvents.     

Synthesis of steroidal thiadiazoles from steroidal ketones

Syntheses of steroidal heterocycles containing a five-membered N,S- heterocycle attached at the 6,7 positions of the B ring are reported. 5Alpha-cholestane-6-one (1), its 3beta-acetoxy- (2) and 3beta-chloro- (3) analogues reacted with semicarbazide and aqueous sodium acetate in refluxing ethanol to yield 5alpha-cholestan-6-one-semicarbazone 1a and its 3-beta-acetoxy and 3beta-chloro derivatives 2a and 3a, respectively. The reactions of 1a, 2a and 3a with thionyl chloride in dichloromethane at low temperature afforded the cyclized thiadiazole 4 and its 3beta-acetoxy- and 3beta-chloro analogues 5 and 6 in good yields.     

A modulated dsc study on the in situ polymerization of cyclic butylene terephthalate oligomers

The polymerization of a cyclic butylene terephthalate (CBT) oligomer was studied as a function of temperature (T=200 and 260°C, respectively) by modulated DSC (MDSC). The first heating was followed by cooling after various holding times (5, 15 and 30 min) prior to the second heating which ended always at T=260°C. This allowed us to study the crystallization and melting behavior of the resulting polybutylene terephthalate (PBT), as well. In contrary to the usual belief, the CBT polymerization is exothermic and the related process is superimposed to that of the CBT melting. The melting behavior of the PBT was affected by the polymerization mode (performed below or above the melting temperature of the PBT product) of the CBT. Annealing above the melting temperature of PBT yielded a product featuring double melting. This was attributed to the presence of crystallites with different degrees of perfection. The crystals perfection which occurred via recrystallization/remelting was manifested by a pronounced exothermic peak in the non-reversing trace.