Alkylation of 2‐pyridinones: Synthesis of novel acyclonucleosides

This paper presents the synthesis of some novel acyclonucleosides containing 2‐pyridinones and 2‐hydroxyethoxymethyl, 2,3‐dihydroxy‐propyl side chain. The tosylate of these nucleosides analogues could be modified to azido derivatives. Also, acyclonucleosides with 1‐ethoxymethyl, 1‐benzyloxymethyl, 1‐methylthiomethy 1 and 2‐hydroxyethyl side chains have been investigated. The O‐alkylated pyridine derivatives were obtained during most reactions.     

Enaminones in heterocyclic synthesis: Synthesis and chemical reactivity of 3‐anilino‐1‐substituted‐2‐propene‐1‐ one

The 3‐anilinoenones 3a,b were prepared from the corresponding 3‐dimemyl‐aminopropenones. The reactivity of 3a,b towards a variety of carbon and nitrogen nucleophiles as well as naphthoquinones is reported.     

Ion exchangers as catalysts. II. Catalytic decomposition of hydrogen peroxide with resin-ethylenediamine-copper(II) complex ions

Summary The slow decomposition of H₂O₂ in the presence of Dowex-50 W resin in the form of an ethylenediaminecopper(II) complex ion in water is accompanied by an induction period. The reaction is first order with respect to [H₂O₂] and the rate constant (perg of dry resin) was deduced. Autocatalytic behaviour was found for the H₂O₂ decomposition with 2% crosslinked divinylbenzene. The induction period disappeared and the reaction rate increased when the decomposition was carried out with a resin in the form of a peroxo-copper complex, which proves that the formation of an intermediate (active species) retards the reaction rate. The precursor of the active species, formed during the induction period, was not the amine-copper(II) complex ion but a product of the latter with H₂O₂. It proved impossible to carry out the decomposition in acid or buffer solutions, in which the resin is regenerated.     

Carbon‐based Nanosensors for Salicylate Determination in Pharmaceutical Preparations

Thiourea derivative‐based carbon paste electrode (TUD1‐CPE) was constructed as a potentiometric sensor for the determination of salicylate anion in pharmaceutical formulations, Aspocid® and Aspirin®. The optimized CPE contained 45.5 % graphite, 0.5 % reduced graphene oxide (rGO), 46.0 % nitrophenyl octyl ether (NPOE) plasticizer, 5.0 % TUD1 ionophore, and 3.0 % tridodecylmethyl ammonium chloride as additive. The incorporation of NPOE of high dielectric constant, and rGO in electrode caused better performance of the sensor; Nernstian response of 59.0 mV decade^?1 in the concentration range of 10^?1–10^?5 mole L^?1, a detection limit of 1×10^?5 mole L^?1 in a very short response time of 6 seconds. The prepared sensor showed high selectivity against similar anions (i. e. , benzoate, I^?, SCN^?). Selectivity was confirmed by calculating the formation constant (K_β) using sandwich membrane method, where K_β for TUD1‐salicylate is 10^0.43. Theoretical calculations at DFT‐B3LY/6‐31G** level of theory were performed to find interaction mechanism, Energies of HOMO and LUMO orbitals, non‐linear optical (NLO) properties (the electronic dipole moment (μ), first‐order hyperpolarizability (β), the hyper‐Rayleigh scattering (β_HRS) and the depolarization ratio (DR)), and other global properties; these calculations showed lower values of β and DR, higher value of β_HRS, and the shortest lengths of the four N?H bonds between TUD1 and salicylate which confirm their strong complexation and salicylate‐selectivity. Also, all the studied anion‐TUD1 exhibited relatively high NLO properties, and these results were considered as a preliminary study for investigating new types of NLO bearing materials. The sensors were applied successfully for the determination of salicylate anion in Aspocid® and Aspirin®.     

Analysis of selected pesticides and alkylphenols in human cord blood by gas chromatograph-mass spectrometer

A total of seven pesticides and eight alkylphenols were monitored using this method for the determination of their trace levels in human cord blood. The pesticides are lindane, diazinon, α-endosulfan, β-endosulfan, endosulfan sulfate, chlorpyrifos and endrin; while the alkylphenols are 4-n-butylphenol, 4-n-pentylphenol, 4-n-hexylphenol, 4-t-octylphenol, 4-n-heptylphenol, nonylphenol, 4-n-octylphenol and bisphenol A. The pesticides and alkylphenols in the cord blood samples were extracted with solid phase extraction IST C18 cartridges and analyzed by selected ion monitoring mode using quadrapole detector in Shimadzu QP-5000 gas chromatograph-mass spectrometer. Trace levels of pesticide and alkylphenols in the range of non-detectable to 15.17 ng ml⁻¹, were detected in the human cord blood samples. This technique of monitoring the levels of endocrine-disruptors in blood samples is consistent, reliable and cost effective while reducing wastage of time and solvents.     

Allene cross-metathesis: synthesis of 1,3-disubstituted allenes

[reaction: see text] Grubbs catalyst, Cl2(Cy3P)2Ru=CHPh, was found to catalyze the cross-metathesis of monosubstituted allenes to 1,3-disubstituted allenes in varying yields.     

Synthesis of steroidal thiadiazoles from steroidal ketones

Syntheses of steroidal heterocycles containing a five-membered N,S- heterocycle attached at the 6,7 positions of the B ring are reported. 5Alpha-cholestane-6-one (1), its 3beta-acetoxy- (2) and 3beta-chloro- (3) analogues reacted with semicarbazide and aqueous sodium acetate in refluxing ethanol to yield 5alpha-cholestan-6-one-semicarbazone 1a and its 3-beta-acetoxy and 3beta-chloro derivatives 2a and 3a, respectively. The reactions of 1a, 2a and 3a with thionyl chloride in dichloromethane at low temperature afforded the cyclized thiadiazole 4 and its 3beta-acetoxy- and 3beta-chloro analogues 5 and 6 in good yields.     

Retention, kinetics and thermodynamics profile of cadmium adsorption from iodide medium onto polyurethane foam and its separation from zinc bulk

The sorption behaviour of 2.5 × 10⁻⁵ M solution of Cd(II) on polyurethane foam (PUF) from iodide medium have been investigated. The conditions were optimized from aqueous solutions of different pH (1-10) and of acids of varied concentration (0.01-1.0 M). The maximum concentration of KI was found to be 0.24 M and equilibration time was established to be 20 min. The data successfully followed the Freundlich and Dubinin-Radushkevich (D-R) isotherms at low metal ion concentration while Langmuir isotherm followed at higher metal ion concentration. The Freundlich parameter 1/n = 0.66 ± 0.02 have been evaluated whereas D-R isotherm yields the sorption free energy E = 10.5 ± 0.1 kJ mol⁻¹ indicating ion exchange type chemisorption. The monolayer coverage (XL) constant of Langmuir isotherm was found to be 23.7 ± 0.4 mg g⁻¹. The numerical values of thermodynamics parameters enthalpy (ΔH), entropy (ΔS) and Gibbs free energy (ΔG) indicated the endothermic and spontaneous nature of sorption. The Scatchard plot analysis was tested to evaluate the binding sites of the PUF and stability constants of sorption were determined. On the basis of these parameters, the sorption mechanism was discussed. Among the foreign ions tested, Pb(II), Hg(II), cyanide and nitrite should be absent. The clean separation of Cd(II) from Zn(II) ions in the ratio 1:250, respectively, was achieved by column chromatography.     

Enhancement of the catalytic activity of [Cu2(TS)(OH)2(OAc)] using superconductor cuprate sample

A superconducting sample (Nd_0.1Y_0.9Ba₂Cu₃O_7-δ) has been tried as a catalyst for H₂O₂ decomposition. All parameters affecting the reaction rate (concentration of H₂O₂, weight of catalyst, temperature and pH) were studied and the optimum conditions were evaluated. A mixture of the superconducting cuprate with [Cu₂(TS)(OH)(OAc)] using different percentages of the sample has been prepared and tried kinetically under the same mentioned conditions. An attempt was made to increase the activity of the complex. The data show that the cuprate sample alone was found to be almost inactive when compared with that of the mixture. The catalytic mechanism in the absence and presence of the complex was suggested.     

De novo enantioselective syntheses of galacto-sugars and deoxy sugars via the iterative dihydroxylation of dienoate

An efficient route to various sugar lactones has been developed. Key to the overall transformation is the sequential osmium-catalyzed dihydroxylation of 2,4-dienoates. The simplest (one-step/racemic) example of this reaction occurs when the dihydroxylation is performed with aqueous NMO in MeOH. When the first dihydroxylation is performed using the AD-mix procedure, an enantioselective variant results. When a matched AD-mix procedure is used for the second dihydroxylation, an exceedingly diastereo- and enantioselective synthesis of galacto-1,4-lactone results. [Reaction: see text]