A Convenient Synthetic Route of Diethyl (4‐Oxo‐chromeno[2,3‐d]pyrimidin‐2(5)‐yl)phosphonates

Novel diethyl (4‐oxo‐3,4‐dihydro‐2H‐chromeno[2,3‐d]pyrimidin‐2‐yl)phosphonate as two enantiomers and diethyl (4‐oxo‐1,5‐dihydro‐4H‐chromeno[2,3‐d]pyrimidin‐5‐yl) phosphonate were obtained in easy procedure via reaction of 2‐imino‐2H‐chromene‐3‐carboxamide, dimethylformamide dimethyl‐acetal, and diethyl phosphite in a simple one pot. Possible reaction mechanisms were proposed. The structures of the obtained products were confirmed by elemental analyses and spectral tools.     

The impact of time on the heat resistance of self-compacting high-performance concrete incorporated with recycled martials

The influence of time on the mechanical behavior of concrete after exposure to elevated temperatures has been studied. Twenty-one self-compacting high-performance concrete mixtures with different incorporation amounts of coarse recycled concrete aggregate (RCA) and three unprocessed waste powder materials have been tested at age of 270 days for residual compressive and flexural strength after exposure to fire. The results have been compared to the results for the same concrete, which have been studied at age of 90 days. A new parameter has been introduced for comparing the responses of concrete to elevated temperatures at different ages; this parameter was the “heat resistance” which expresses the total area under the curve of the relative residual strength (compressive or flexural) after exposing to six temperature degrees (20, 150, 300, 500, 600, and 800 °C). The results showed that the age of concrete has an influence on the response of concrete to elevated temperatures. The heat resistance of compressive strength enhanced with age but the concrete behaved with a tendency different to that at the age of 90 days. The heat resistance of flexural strength has not been affected or slightly decreased but not with more than 10% to that at the age of 90 days. The used waste powder materials were unprocessed waste fly ash, waste cellular concrete powder and waste perlite powder; they proved that using any of them up to 15% as a replacement for cement with 0% or 25% of RCA enhanced the concrete resistance for the fire with time. The main two reasons for changing of residual strength with the time were the changing of water content and the proceeding of hydration of the binder. In general, long ages testing properties of concrete simulate the real behavior of concrete structures accurately.

     

Thiochloroarsenate(III): Darstellung,Schwingungsspektren und Kristallstrukturen von PPh4[As2SCl5] und (PPh4)2[As2SCl6] · C2H4Cl2

Thiochloroarsenates (III): Preparation, Vibrational Spectra, and Crystal Structures of PPh₄[As₂SCl₅] and (PPh₄)₂[As₂SCl₆] · C₂H₄Cl₂ PPh₄[As₂SCl₅] can be obtained from As₂S₃ + PPh₄Cl with HCl in CH₂Cl₂ or 1,2-C₂H₄Cl₂. It reacts with a second mole of PPh₄Cl to yield (PPh₄)₂[As₂SCl₆]. The latter also is formed by the reaction of As₂S₅ + 2 PPh₄Cl with HCl, a second product being (PPh₄)₂[As₂Cl₈]. The i.r. and Raman spectra of the title compounds are reported. Their crystal structures were determined by X-ray diffraction. Crystal data: PPh₄[As₂SCl₅], monoclinic, space group P2₁/n, a = 1175.8, b = 1508.0, c = 1593.4 pm, β = 96.22°, Z = 4; (PPh₄)₂[As₂SCl₆] · C₂H₄Cl₂, triclinic, P1, a = 1166.3, b = 1188.2, c = 2044.6 pm, α = 95.47, β = 97.53, γ = 111.05°, Z = 2. Including the lone electron pairs, the coordination of the As atoms in the [As₂SCl₅]⁻ ion is distorted trigonal-bipyramidal with the S, one Cl atom, and an electron pair in equatorial positions; the two bipyramids around the two As atoms share a common edge. The As atoms in the [As₂SCl₆]²⁻ ion have a distorted octahedral coordination, the two octahedra share a common face; the lone electron pairs are in the trans positions to the S atom.     

Preparation of bis(μ-chalcogeno) complexes [(η5-RC5H4)2M(μ-E)]2 M = Zr,Hf; R = H,t-Bu; E = S or Se from metallocene dichlorides,and isolation of the mixed μ-complexes [(t-BuC5H4)2Zr2](μ-O)(μ-E)

Metallocene dichlorides (RCp)₂MCl₂ (M = Zr, Hf; R = H, t-Bu) react with E/2HLiBEt₃ (E = S, Se) to give the symmetrical dinuclear compounds [(RCp)₂M(μ-E)]₂. UV irradiation in toluene of [(t-BuCp)₂Zr(CH₃)]₂(μ-O) in the presence of powdered sulfur or gray selenium gives the new compounds [(t-BuCp)₂Zr₂](μ-O)(μ-E).     

Efficient One‐Pot Four‐Component Synthesis and X‐ray Crystallographic Structure of 2‐Pyridone Derivatives

A series of 3‐cyano‐2‐pyridone derivatives were synthesized by one‐pot four‐component condensation reaction involving a benzaldehyde derivative, alkyl cyanoacetate, acyclic or cyclic ketones, and ammonium acetate in reflux condition. The X‐ray structure of the products 5a and 5d confirm symmetric dimers via hydrogen bonding interactions between individual pyridine molecules showing, in addition, also π–π stacking interactions.     

Synthesis, physical studies and uptake behavior of: copper(II) and lead(II) by Schiff base chelating resins

Two new chelating resins possessing multiple functional groups capable of coordinating with several metal ions are reported. The resins were synthesized by condensing Schiff bases derived from 2-aminophenol, 2-hydroxy-5-chloroaniline and terephthaldehyde with formaldehyde in an alkaline medium. The effects of pH and contact time of the Cu(2+) and Pb(2+) in aqueous solutions on the uptake behavior of the resins were studied. The metal ion uptake behavior of the resins was investigated by the batch method. Both the uptake and the selectivity of the resins towards the investigated metal ions were related to the structure of the resins, type of the metal ion and the uptake conditions. The resins showed maximum uptake capacity for Cu(2+) and Pb(2+) at pH 10. Cu(2+) was seen to undergo preferential adsorption in separate and mixture solutions of Cu(2+) and Pb(2+). Kinetic studies for the resins using Langmiur equation were also performed. The Schiff base monomers and their formaldehyde resins were characterized by elemental analyses, FTIR and (1)H NMR spectroscopy. The thermal stability of the resins was studied using TGA/DTG analysis.     

Studies on the Uptake of Rare Earth Elements on Polyacrylamidoxime Resins from Natural Concentrate Leachate Solutions

Synthesis of poly(acrylamidoxime) resin from polyacrylonitrile performed with different crosslinking ratios 2, 5, and 10 wt% of divinylbenzene as crosslinking agent, using methylbenzoate and dioctylphthalate as pore producing solvent, the reaction mixture occurred under nitrogen. Studies carried out on diluted solution from rare earth elements (REEs) concentrate contains impurities as Cu²⁺, Ni²⁺, Zn²⁺, Fe³⁺, Al³⁺, Si⁴⁺, Th⁴⁺, U⁶⁺, Ca²⁺, and K⁺. Changing some parameters as pH of the solution, time of feeding and type of acid as HCl, HNO₃, H₂SO₄. The adsorption efficiency of resin is in the order pH 6 > pH 5 > pH 4 > pH 2 with excluding pH 6 due to the precipitation of some of REEs with the impurities and complete precipitation of Dy ion during pH adjustment, the adsorption in HNO₃ > HCl > H₂SO₄ media.     

Efficient Method for Oxidation of Ketones to Esters with 4-Aminoperoxybenzoic Acid Supported On Silica Gel

4-Aminoperoxybenzoic acid supported on silica gel was found to be a versatile and efficient oxidant for the oxidation of ketones to esters.     

Determination of glucosamine in raw materials and dietary supplements containing glucosamine sulfate and/or glucosamine hydrochloride by high-performance liquid chromatography with FMOC-Su derivatization: collaborative study

A collaborative study was conducted for determination of glucosamine in raw materials and dietary supplements containing glucosamine sulfate and/or glucosamine hydrochloride by high-performance liquid chromatography (HPLC) with N-(9-fluorenyl-methoxycarbonyloxy) succinimide (FMOC-Su) derivatization. Thirteen blind materials, one pair of which were duplicates, were tested by 12 collaborating laboratories. The test samples consisted of various commercial products, including tablets, capsules, drink mix, and liquids as well as raw materials, blanks, and those for spike recovery analyses. The tests with blank products and products spiked with glucosamine showed good specificity of the method. The average recoveries at spike levels of 100 and 150% of the declared amount were 99.0% with a relative standard deviation (RSD) of 2.1%, and 101% with an RSD of 2.3%, respectively. The test results between laboratories on each commercial product were reproducible with RSD values of no more than 4.0%, and the results were repeatable in the same laboratory with an average RSD of 0.7%. HorRat values ranged from 0.5 to 1.7 on both tests of spike recovery and reproducibility between laboratories on commercial products. The average determination coefficient of the calibration curves from the laboratories was 0.9995 with an RSD of 0.03%. All of the 12 collaborating laboratories succeeded in the study and none of their reported test results were outliers, partly indicating the robustness of the method. It is recommended that the method be accepted by AOAC INTERNATIONAL as Official First Action.     

Immunomagnetic nanoparticle based quantitative PCR for rapid detection of Salmonella

We have developed a rapid and sensitive method for immunomagnetic separation (IMS) of Salmonella along with their real time detection via PCR. Silica-coated magnetic nanoparticles were functionalized with carboxy groups to which anti-Salmonella antibody raised against heat-inactivated whole cells of Salmonella were covalently attached. The immuno-captured target cells were detected in beverages like milk and lemon juice by multiplex PCR and real time PCR with a detection limit of 10⁴ cfu.mL^?1 and 10³ cfu.mL^?1, respectively. We demonstrate that IMS can be used for selective concentration of target bacteria from beverages for subsequent use in PCR detection. PCR also enables differentiation of Salmonella typhi and Salmonella paratyphi A using a set of four specific primers. In addition, IMS—PCR can be used as a screening tool in the food and beverage industry for the detection of Salmonella within 3–4 h which compares favorably to the time of several days that is needed in case of conventional detection based on culture and biochemical methods.