Fabrication of a passive 3D mixer using CO2 laser ablation of PMMA and PDMS moldings

In this article a novel method for the fabrication of a passive 3D mixer is presented. It has been shown that in CO2 laser ablation of Polymethyl Methacrylate (PMMA), bending and straight cone structures can be fabricated by adjusting the laser scanning parameters. The effect of the bending cones in the flow direction of a fluid is discussed with computer simulation and a passive mixer based on such structures is designed. Bending and straight cones are fabricated on a PMMA substrate using CO2 laser ablation technique. The structure is molded with PDMS to make two half-channels with bending and straight cones extending out of the surface. Two PDMS structures are stacked on top of each other with a certain displacement to fabricate the mixer.     

Kinetic study of electrochemically induced Michael reaction of1,4-dihydroxyanthraquinone with acetylacetone and benzoylacetone

The electrochemical oxidation of 1,4-dihydroxyanthraquinone has been studied in the presence of acetylacetone and benzoylacetone as nucleophiles in a mixture of ethanol/water by means of cyclic voltammetry as a diagnostic technique.The results indicate the participation of electrochemically produced anthraquinone in the Michael addition reaction with acetylacetone and benzoylacetone to form the corresponding new anthraquinone derivatives.On the basis of the EC mechanism,the observed homogeneous rate constants（kobs）of the reaction of anthraquinone with acetylacetone and benzoylacetone were estimated by comparing the experimental cyclic voltammograms with the digitally simulated results.     

An Efficient Method for Production and Storage of Unstable S-Nitrosothiols Under Mild and Heterogeneous Condition with Sodium Nitrite and Oxalic Acid Dihydrate

Thiols can be readily converted to their corresponding nitrosothiols with a combination of oxalic acid and sodium nitrite in t-butanol at room temperature (26-30°C). The reaction mixture could be solidified with decreasing its temperature to, 15°C and was stored for several days without any destruction of the nitrosothiols.     

Preparation, nano purification, quality control and labeling optimization of [64Cu]-5,10,15,20-tetrakis (penta fluoro phenyl) porphyrin complex as a possible imaging agent

Cu-64 was produced via the ⁶⁸Zn (p,αn)⁶⁴Cu nuclear reaction (≈200 mCi, >95 % chemical yield at 180 μA for 1.1 h irradiation, (radionuclidic purity >96 %, copper-67 as impurity) followed by purification with amino functionalized nano magnetic oxide, Fe₃O₄ aiming to remove trace amount of heavy metal ions from aqueous media due to achieve ultra pure [⁶⁴Cu] CuCl₂ for labeling step. [⁶⁴Cu] labeled 5,10,15,20-tetrakis(penta fluoro phenyl) porphyrin ([⁶⁴Cu]-TFPP) was prepared using freshly prepared [⁶⁴Cu] CuCl₂ (Cu-64; T _1/2 = 12.7 h) and 5,10,15,20-tetrakis(penta fluoro phenyl)porphyrin (H₂TFPP) for 60 min at 100 °C under reflux condition (radiochemical purity: >97 % ITLC, >98 % HPLC, specific activity: 14–16 GBq/mmol). Stability of the complex was checked in final formulation and human serum for 24 h. The partition coefficient was calculated for the compound (log P = 0.73). The biodistribution of the labeled compound in vital organs of wild-type rats was studied using scarification studies and PET imaging up in 2 and 4 h after injection. A detailed comparative pharmacokinetic study performed for ⁶⁴Cu cation and [⁶⁴Cu]-TFPP. The complex is mostly washed out from the circulation through kidneys and liver and can be an interesting tumor imaging/targeting agent due to high specific uptake and rapid excretion through the urinary tract.     

Coating Cellulosic Material with Ag Nanowires to Fabricate Wearable IR-Reflective Device for Personal Thermal Management: The Role of Coating Method and Loading Level

Textiles coated with silver nanowires (AgNWs) are effective at suppressing radiative heat loss without sacrificing breathability. Many reports present the applicability of AgNWs as IR-reflective wearable textiles, where such studies partially evaluate the parameters for practical usage for large-scale production. In this study, the effect of the two industrial coating methods and the loading value of AgNWs on the performance of AgNWs-coated fabric (AgNWs-CF) is reported. The AgNWs were synthesized by the polyol process and applied onto the surface of cotton fabric using either dip- or spray-coating methods with variable loading levels of AgNWs. X-ray diffraction, scanning electron microscopy (SEM), infrared (IR) reflectance, water vapor permeability (WVP), and electrical resistance properties were characterized. The results report the successful synthesis of AgNWs with a 30 μm length. The results also show that the spray coating method has a better performance for reflecting the IR radiation to the body, which increases with a greater loading level of the AgNWs. The antibacterial results show a good inhibition zone for cotton fabric coated by both methods, where the spray-coated fabric has a better performance overall. The results also show the coated fabric with AgNWs maintains the level of fabric breathability similar to control samples. AgNWs-CFs have potential utility for cold weather protective clothing in which heat dissipation is attenuated, along with applications such as wound dressing materials that provide antibacterial protection.     

Direct effect of nanoparticles on the thermal conductivity of CuO-water nanofluid in a phase transition phenomenon using molecular dynamics simulation

Journal of Thermal Analysis and Calorimetry - The thermal behavior of CuO-water nanofluid is examined on an aluminum surface. The dimensions of simulation boxes are...     

A facile electrochemical method for the synthesis of new sulfonamide derivatives of potential biological significance

The electrochemical synthesis of some new sulfonamide derivatives was carried out via the electrochemical oxidation of 2,3-dihydrophthalazine-l,4-dione （1） in the presence of arylsulfinic acids （2a and 2b） as nucleophiles. The results show that, the electrogenerated phthalazine-l,4-dione （lox） participates in a Michael type addition reaction with 2a or 2b and via an EC mechanism to produce the corresponding sulfonamide derivatives. This method provides a one-pot procedure for the synthesis of new sulfonamide derivatives of potential biological significance in good yields without using toxic reagents at a carbon electrode in an environmentally friendly manner.     

Evaluation of aerodynamic performance enhancement of Risø_B1 airfoil with an optimized cavity by PIV measurement

Journal of Visualization - Airfoils are mostly inefficient in their off-design conditions. In order to improve the aerodynamic performance of airfoils in these conditions, using an optimized cavity...     

Kinetic study of electrochemically induced Michael reactions of o‐benzoquinones with 2‐acetylcyclohexanone and 2‐acetylcyclopentanone

The reaction of electrochemically generated o‐benzoquinones ( 2a‐f ) as Michael acceptors with 2‐acetylcyclohexanone (ACH) and 2‐acetylcyclopentanone (ACP), as nucleophiles has been studied in various pHs using cyclic voltammetry. The results indicate that the participation of o‐benzoquinones ( 2a‐f ) in the Michael reaction with acetylcyclohexanone (ACH) to form the corresponding catechol derivatives ( 4a‐f ). Based on an EC mechanism, the homogeneous rate constants were estimated by comparing the experimental cyclic voltammetric responses with the digital simulated results. Copyright © 2007 John Wiley & Sons, Ltd.     

A redundant Klee–Minty construction with all the redundant constraints touching the feasible region

We have previously shown, by redundant Klee–Minty constructions, that the central path may arbitrarily closely visit every vertex of the Klee–Minty cube. In those constructions, the redundant constraints are far away from the feasible region. In this paper, we provide a construction in which all redundant constraints touch the feasible region.