Analytical solution of three-dimensional Navier–Stokes equations for the flow near an infinite rotating disk

In this letter, we will consider variational iteration method (VIM) and Padé approximant, for finding analytical solutions of three-dimensional viscous flow near an infinite rotating disk. The solutions is compared with the numerical (fourth-order Runge–Kutta) solution. The results illustrate that VIM–Padé is an appropriate method in solving the systems of nonlinear equations. It is predicted that VIM–Padé can have wide application in engineering problems (especially for boundary-layer and natural convection problems).     

Organically modified montmorillonite and chitosan–phosphotungstic acid complex nanocomposites as high performance membranes for fuel cell applications

Nanocomposite membranes based on polyelectrolyte complex (PEC) of chitosan/phosphotungstic acid (PWA) and different types of montmorillonite (MMT) were prepared as alternative membranes to Nafion for direct methanol fuel cell (DMFC) applications. Fourier transform infrared spectroscopy (FTIR) revealed an electrostatically fixed PWA within the PEC membranes, which avoids a decrease in proton conductivity at practical condition. Various amounts of pristine as well as organically modified MMT (OMMT) (MMT: Cloisite Na, OMMT: Cloisite 15A, and Cloisite 30B) were introduced to the PEC membranes to decrease in methanol permeability and, thus, enhance efficiency and power density of the cells. X-ray diffraction patterns of the nanocomposite membranes proved that MMT (or OMMT) layers were exfoliated in the membranes at loading weights of lower than 3 wt.%. Moreover, the proton conductivity and the methanol permeability as well as the water uptake behavior of the manufactured nanocomposite membranes were studied. According to the selectivity parameter, ratio of proton conductivity to methanol permeability, the PEC/2 wt.% MMT 30B was identified as the optimum composition. The DMFC performance tests were carried out at 70 °C and 5 M methanol feed and the optimum membrane showed higher maximum power density as well as acceptable durability compared to Nafion 117. The obtained results indicated that owing to the relatively high selectivity and power density, the optimum nanocomposite membrane could be considered as a promising polyelectrolyte membrane (PEM) for DMFC applications.     

Computational study of substituent effect in para substituted platinabenzene complexes

The electronic structure and properties of the platinabenzene and para substituted platinabenzenes have been investigated using the hybrid density functional mpw1pw91 theory. The substituent effect in structure parameters, frontier orbital energies, aromaticity indexes, and hyperpolarizability has been studied. The calculations show that, in all molecules HOMO → LUMO transition makes the major contribution in the most intense electronic transition.     

Synthesis of Novel Chiral Ionic Liquid and Its Application in Reduction of Prochiral Ketones to the Corresponding Chiral Alcohols Using NaBH4

A novel chiral ionic liquid (CIL) based on nicotinium salt has been synthesized and used as an efficient asymmetric chiral catalyst for reduction of acetophenone derivatives with NaBH₄ in methanol at room temperature. The optically active alcohols were obtained in low to moderate enantiomeric excess in a short reaction time.     

Synthesis of Diaryl Ethers Through the Copper-Catalyzed Arylation of Phenols with Aryl Iodides Using KF/Al2O3

An efficient synthesis of diaryl ethers by the copper-catalyzed arylation of phenols with a variety of aryl iodide susing KF/Al₂O₃ as a suitable base and CuI and 1,3 diphenyl-1,3 propandione as the catalyst is described.     

Mode-I interlaminar fracture behaviour of nanoparticle modified epoxy/basalt fibre-reinforced laminates

The effect of nano-reinforcements on fracture behaviour of bulk epoxy nanocomposites and mode-I interlaminar fracture toughness of filament-wound basalt fibre-reinforced laminates was studied. Fracture energy of the bulk epoxy nanocomposites significantly increased with acrylic tri-block-copolymer addition but remained unchanged with incorporation of nanoclay. Delamination fracture toughness was not influenced by the presence of nanoparticles in the matrix. Decreasing fibre volume fraction, on the other hand, significantly improved interlaminar fracture energy. Rigid fibres in these composites constrict the stress field ahead of the crack-tip. Hence, increasing resin content enhanced composite delamination energy by increasing the capacity for matrix deformation. Interlaminar crack propagation through the composite was observed to occur mainly by interfacial failure and matrix cracking.     

The effect of ethanol on the phase behaviour and micro-rheology of liquid crystals

The effect of ethanol on the phase behaviour and micro-rheology of lyotropic liquid crystals (LC) has been studied using a binary mixture of monoglyceride (MG) and aqueous ethanol. The phase behaviour study reveals the structural modulation of surfactant aggregates with increasing ethanol concentration, namely a bicontinuous cubic phase (Ia3d) transitions to the lamellar phase (L_α), at a fixed MG concentration. This behaviour is explained by considering the critical packing parameter (CPP) of the surfactant molecule. Because ethanol dehydrates the surfactant head group (a _s), the CPP values increase (decreasing a _s) and thus the formation of larger CPP aggregates is favoured (i.e., the Ia3d–L_α transition occurs). Cross-polarised images and X-ray scattering data support this conclusion. The structural modulation of the LC has further been investigated using a diffusing wave spectroscopy technique. The correlation and relaxation times, determined from the intersection point at short and long time scales of the mean square displacement (MSD), decrease with increasing concentrations of ethanol, indicating structural modulation of the LC. The micro-viscoelastic moduli (G′ and G′′) derived from the Laplace transformation of the MSD decrease with increasing ethanol concentrations, due to the LC modulation. The thermal effects on the micro-rheology of the LC have also been studied.     

Nanosized sulfated zirconia as solid acid catalyst for the synthesis of 2-substituted benzimidazoles

The condensation reaction of o-phenylenediamine and arylaldehydes was investigated in the presence of nanosized sulfated zirconia (SO ₄ ^2? -ZrO₂) as the solid acid catalyst. Nanosized SO ₄ ^2? -ZrO₂ was prepared and characterized by the XRD, FT-IR, and SEM techniques. The results confirm good stabilization of the tetragonal phase of zirconia in the presence of sulfate. Reusability experiments showed partial deactivation of the catalyst after each run; good reusability can be achieved after calcinations of the recovered catalyst before its reuse.     

Pertraction of methylene blue using a mixture of D2EHPA/M2EHPA and sesame oil as a liquid membrane

An experimental study on the pertraction of methylene blue (MB) through a supported liquid membrane (SLM) using a mixture of mono-(2-etylhexyl) ester of phosphoric acid (M2EHPA) and bis-(2-etylhexyl) ester of phosphoric acid (D2EHPA) and sesame oil as the liquid membrane (LM) was performed. Parameters affecting the pertraction of MB such as initial MB concentration, carrier concentration, feed phase pH, and stripping phase concentration were analyzed. Optimal experimental conditions for MB pertraction (permeability of 5.63 × 10^?6) were obtained after a 7 h separation with the MB concentration in the feed phase of 80 mg L^?1, D2EHPA/M2EHPA concentration in membrane phase of 40 vol. %, feed pH of 6, and acetic acid concentration in the stripping phase of 0.4 mol L^?1. Kinetics of transport and stability of the SLM system were also studied and the mass transfer coefficient for this system was evaluated. Scanning electron microscopy (SEM) was used to morphologically characterize the membrane surface.     

Application of a cohesive zone element for the prediction of damage in nano/micro coating

Many tools in production technology are nowadays coated to obtain a satisfactory lifetime and degradation resistance. Therefore, the main goal of this study is to investigate antiadhesive and wear resistant coatings made of ceramics, plastics and metals produced by High Power Pulsed Magnetron Sputtering (HPPMS) technique [1]. A cohesive zone element technique (CZ) is applied to model the interactions of the coatings and the substrate surfaces (see [2]). This goes along with the investigations of the delamination and failure behavior of the involved surfaces. To illustrate the applicability of the model, several structural simulations are performed. The developed CZ element model is capable of modeling the separation, the contact and also the irreversible reloading conditions in both normal and tangential directions [3]. The model is further developed to be applicable for different structures including different bonding behaviors, with a higher stability. The talk concludes with a detailed discussion of the numerical results of different material and interface properties. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)