A tetra-coordinate nickel(II) complex as neutral carrier for nitrate-selective PVC membrane electrode

The potentiometric response properties and applications of a tetra-coordinate nickel(II) complex with relatively high selectivity toward nitrate ion are described. The nickel(II) complex of 5,7,12,14-tetramethyl-1,4,8,11-tetraazacyclotetradeca-4,6,11,13-tetraene was used as a neutral carrier into plasticized poly(vinyl chloride) (PVC) membrane. The influence of several variables was investigated in order to optimize the potentiometric response and selectivity of the electrode. The resulting membrane electrode incorporating 31.0% PVC, 61.0% dioctyl phthalate (DOP) as plasticizer, 3% methyltrioctylammonium chloride (MTOAC) as a cationic additive and 5% carrier (all w/w) demonstrates a Nernstian response slope of −59.6 mV per decade over the concentration range of 5×10⁻⁶-1×10⁻¹ M NO₃⁻. The electrode exhibits a fast response time (≤10 s), a detection limit of 2.5×10⁻⁶ M, and can be used over a wide pH range of 4-12. The electrode shows improved selectivity in comparison to most of the previously reported nitrate-selective electrodes. It was successfully applied to the determination of nitrate ion in natural water samples.     

Synthesis and characterization of platinum(II) and (IV) complexes containing hexamethyleneimine ligand: crystal structure of [Pt(hexamethyleneimine)2(cyclobutanedicarboxylato)]·H2O

A series of new platinum(II) and platinum(IV) complexes of the type [Pt^II(HMI)₂X] (where HMI=hexamethyleneimine, X=dichloro, sulfato, 1,1-cyclobutanedicarboxylato [CBDCA], oxalato, methylmalonato, or tatronato) and [Pt^IV(HMI)₂Y₂Cl₂] (where Y=hydroxo, acetato, or chloro) were synthesized and characterized by infrared (IR) spectroscopy, ¹³C and ¹⁹⁵Pt nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. Among the complexes synthesized, [Pt^II(hexamethyleneimine)₂(1,1-cyclobutanedicarboxylato)]·H₂O was examined by single-crystal X-ray diffraction. The slightly distorted square planar coordination environment of the platinum metal includes the amino group of the hexamethyleneimine (HMI) molecule and the oxygen atoms of the carboxylato ligand. The cyclobutanedicarboxylic acid (CBDCA) molecule adopts six-member chelating rings with platinum. Hydrogen bonding plays an important part in holding the crystal lattice together.     

Mutual Separation and Determination of Th(IV) and U(VI) Using Arsenazo III as a Dye Collector Reagent by Flotation‐Spectrophotometric Method

This paper reports a simple and highly selective method for the separation, preconcentration, and determination of trace amounts of thorium and uranium in some complex samples via staircase flotation. The method is based on the initial flotation of the Th(IV)‐arsenazo III complex in the presence of U(VI) from a solution of 5 mol dm^?3 HCl, then reduction of U(VI) to U(IV) and repetition of the flotation step. In both steps, the floated complex was dissolved in a 5‐mL portion of methanol and its absorbance was measured at 655 nm, spectrophotometrically. For a 30‐mL portion of the sample, Beer's law was obeyed over the concentration ranges of 3.40 × 10^?7to 3.06 × 10^?6 mol dm^?3 for Th(IV) and3.40 × 10^?7 to 3.40 × 10^?6 mol dm^?3 for U(IV) with the apparent molar absorptivity of 4.20 × 10⁵ dm³ mol^?1 cm^?1 and 3.59 × 10⁵ dm³ mol^?1 cm^?1, respectively. The RSDs (n = 7) corresponding to 1.7 × 10^?6 mol dm^?3 of Th(IV) and U(IV) were obtained as 1.7% and 1.87%. The detection limits (7 blanks) for both the metal ions were found to be 1.7 × 10^?7 mol dm^?3. The important benefit of the method is that the determinations are free from the interference of almost all cations and anions found in the complex matrixes, such as seawater samples. The proposed method was also applied to reference materials, and the determinations were shown to have good agreement with the certified values.     

Synthesis of 1-oxa-2-silacyclopentane derivatives via intramolecular nucleophilic attack at silicon

Metalation of (HSiMe₂)₃CH with lithium diisopropylamide (LDA) in THF gives (HSiMe₂)₃CLi, which reacts with ethylene oxide, propylene oxide, 1,2-epoxy butane, 1,2-epoxy pentane, 1,2-epoxy hexane, and epichlorohydrin to give the corresponding 1-oxa-2-silacyclopentane derivatives. Then, glycidylmethacrylate (GM) random copolymers with styrene (St) (in a 1:1 and 1:3 mol ratio) were synthesized by solution free radical polymerization at 70(±1) °C using α,α′-azobis(isobutyronitrile) (AIBN) as an initiator. Both types of copolymers were treated with (HSiMe₂)₃CLi to give new modified copolymers. The reaction of (HSiMe₂)₃CLi with epoxides on the side chains of the copolymers does not lead to intramolecular nucleophilic attack contrary to simple epoxides. All the products have been characterized by spectroscopic techniques.     

Simultaneous Kinetic‐Spectrophotometric Determination of Hydrazine and its Derivatives by Partial Least Squares and Principle Component Regression Methods

Simultaneous kinetic‐spectrophotometric determination of a ternary mixture of hydrazine (HZ) and its derivatives by principal component regression (PCR) and partial least squares (PLS) calibration is described. The methods were based on the difference observed in the reduction rate of iron(III) with HZ, thiosemicarbazide (TSCZ) and phenylhydrazine (PHZ) in the presence of 2,2′‐bipyridine (Bpy). The colored complex of [Fe(Bpy)₃]²⁺ was formed in sodium dodecyl sulfate (SDS) as micellar media, and then monitored at 520 nm. The results showed that simultaneous determination of HZ, TSCZ and PHZ could be performed in their concentration ranges of 1.0–70.0, 0.2–6.0 and 0.1–10.0 μg mL^?1, respectively. The root mean squares errors of prediction (RMSEP) of HZ, TSCZ and PHZ were 0.719, 0.164 and 0.105 (for PLS) 0.788, 0.166 and 0.993 (for PCR), respectively. Both methods (PCR and PLS) were validated using a set of synthetic sample mixtures and then applied for simultaneous determination of HZ, TSCZ and PHZ in water samples.     

A Lead‐Selective Membrane Electrode Based Upon a Phosphorylated Hexahomotrioxacalix[3]Arene

Solvent extraction of a mixture of Pb^II, Mn^II, Fe^III, Co^II, Ni^II and Cd^II in aqueous perchlorate medium by a phosphorylated hexahomotrioxacalix[3]arene (calix‐3) in dichloromethane shows a significant selectivity towards lead ions. The ligand can also be incorporated into a membrane to provide a new lead ion‐selective electrode (Pb^II‐ISE). A plasticized PVC membrane containing 30% PVC, 53.5% ortho‐nitrophenyloctylether (NPOE), 4.5% sodium tetraphenylborate (NaTPB) and 12% ionophore was directly coated on a graphite rod. This sensor gave a good Nernstian response of 29.7 ± 0.7 mV decade^?1 over a concentration range of 1 × 10^?8 – 1 × 10^?4 M of lead ions, independent of pH in the range 3‐7, with a detection limit of 0.4 × 10^?8 M. The dynamic response time of the electrode to achieve a steady potential was very fast and found to be less than 7 s. The selectivity relative to Ag⁺, NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺, Y³⁺ and Th⁴⁺ was examined. The electrode exhibits adequate stability with good reproducibility (with a slope of 29.6 ± 1.5 mV for 8 weeks). The characteristics of the sensor are compared with those of a tetraphosphorylated calix[4]arene (calix‐4) based Pb^II‐ISE, reported recently. The electrode was successfully used as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for lead ion measurements in various synthetic samples was also investigated.     

One-pot three-component reaction of isocyanides, dialkyl acetylenedicarboxylates and phthalhydrazide: synthesis of highly functionalized 1H-pyrazolo[1,2-b]phthalazine-5,10-diones

Protonation of the highly reactive 1:1 intermediate produced in the reaction between alkyl isocyanides and electron-deficient acetylenic esters with phthalhydrazide, leads to a vinylisonitrilium cation, which undergoes an addition reaction with the conjugate base of the phthalhydrazide to produce dialkyl 3-(alkylamino)-5,10-dioxo-5,10-dihydro-1H-pyrazolo[1,2-b]phthalazine-1,2-dicarboxylates in fairly good yields at room temperature.     

Modification of carbon ceramic electrode prepared with sol-gel technique by a thin film of chlorogenic acid: application to amperometric detection of NADH

The carbon ceramic electrode prepared with sol-gel technique is modified by a thin film of chlorogenic acid (CGA). By immersing the carbon ceramic electrode in aqueous solution of chlorogenic acid at less than 2 s a thin film of chlorogenic acid adsorbed strongly and irreversibly on the surface of electrode. The cyclic voltammetry of the resulting modified CCE prepared at optimum conditions shows a well-defined stable reversible redox couple due to hydroquinone/quinone system in both acidic and basic solutions. The modified electrode showed excellent electrocatalytic activity toward NADH oxidation and it also showed a high analytical performance for amperometric detection of NADH. The catalytic rate constant of the modified carbon ceramic electrode for the oxidation of NADH is determined by cyclic voltammetry measurement. Under the optimised conditions the calibration curve is linear in the concentration range 1-120 μm. The detection limit (S/N = 3) and sensitivity are 0.2 μM and 25 nA μM⁻¹.The results of six successive measurement-regeneration cycles show relative standard deviations of 2.5% for electrolyte solution containing 1 mM NADH, indicating that the electrode renewal gives a good reproducible and antifouling surface. The advantages of this amperometric detector are: high sensitivity, excellent catalytic activity, short response time t < 2 s, remarkable long-term stability, simplicity of preparation at short time and good reproducibility.     

Synthesis and structural characterization of trivalent amino acid derived chiral phosphorus compounds

Reaction of the N-toluenesulfonyl derivatives of (S)-alanine, phenylalanine, and valine (4-6) with PhPCl(2) gave in high yield the 4-methyl, benzyl, and isopropyl derivatives (7-9) of 2-phenyl-1-p-toluenesulfonyl-1,3,2-oxazaphospholidin-5-one. The ratios of the (2S,4S)/(2R,4S) diastereomers (cis/trans isomers) were 1:1, 2:1, and 10:1 for the methyl, benzyl, and isopropyl derivatives 7a,b, 8a,b, and 9a,b, respectively. For 7a,b, both isomers could be crystallized, but for the others only the major isomers were isolable. The X-ray crystal structure of 9a shows that the isopropyl and phenyl groups are mutually cis and that the tolyl moiety is oriented s-trans to both the isopropyl and phenyl groups. Reaction of 6 with Cl(2)PCH(2)CH(2)PCl(2) (10) gave a 56:38:7 mixture of the cis/cis, cis/trans, and trans/trans diphosphorus heterocycles 11a-c. The major isomer could be crystallized and isolated free of the other diastereomers. Reaction of 6 with EtPCl(2) gave a 6:1 mixture of cis/trans isomers of the ethyl-substituted heterocycles 12a,b as an inseparable oil but allowed confirmation of the structure of 11a. Slow epimerization at phosphorus may occur by inversion but more likely by ring opening/closure, since 7b, 9a, and 11a give rise upon standing in solution to mixtures containing starting material and 7a, 9b, and 11b, respectively, along with the free amino acid derivatives 4 and 6. The NMR spectra, and in particular the coupling constants between the alpha-hydrogen atom of the amino acid moiety and phosphorus, were used to establish the identities of the cis and trans isomers. Reaction of 9a with (THF)W(CO)(5) gave the phosphorus-ligated adduct (9a)W(CO)(5) (13), and the IR spectrum of this complex shows that 9a is a strongly electron-withdrawing ligand. The geometry of the sulfonamide moiety is discussed in detail, as are the (1)H NMR coupling constants. The data are consistent with the presence of little steric interaction between the cis isopropyl and phosphorus substituent in 9a, 11a, and 12a and orientation of the tolyl moiety s-cis to the isopropyl group in 9b, 12b, and 13.     

Headspace solvent microextraction A new method applied to the preconcentration of 2-butoxyethanol from aqueous solutions into a single microdrop

A new procedure and experimental setup for the headspace solvent microextraction of volatile organic materials from aqueous sample solutions is described. The extraction occurs by suspending a 3-μl drop of the solvent from the tip of a microsyringe to the headspace of a stirred aqueous sample solution for a preset extraction time. The temperature of the microdrop and the bulk of sample solution should be kept constant at optimized values. The sample analyses were carried out by gas chromatography. The procedure was successfully applied to the extraction and determination of 2-butoxyethanol from content of some color samples used for painting the outer coverage of some machines such as coolers, refrigerator, cloths machine, etc. Parameters such as extraction time, nature of extraction solvent, size of microdrop, sample volume, stirring rate, ionic strength and pH of sample solution were studied and optimized, and the method performance was evaluated.