A facile synthesis of novel 1,4-benzoxazepin-2-one derivatives

An efficient and simple synthesis of 1,4-benzoxazepin-2-one derivatives has been achieved via the reaction of isoquinoline, activated acetylenes, and 1-(6-hydroxy-2-isopropenyl-1-benzofuran-yl)-1-ethanone in water without using any catalyst. This one-pot reaction occurs in high yields under mild conditions.     

Fuzzy model prediction of Co (III)Al2O3 catalytic behavior in Fischer-Tropsch synthesis

The application of Co(Ⅲ)/Al2O3 catalyst in Fischer-Tropsch synthesis(FTS)was studied in a wide range of synthesis gas conversions and compared with Fuzzy Simulation results.Present study applies fuzzy model to predicting the product composition of CH4,CO2 and CO in Fischer-Tropsch process for natural gas synthesis,in which the input vector was 4-dimension including four variables(operating pressure, operating temperature,time and CO/H2 ratio)of 70 different experiments and the output product is a composition of CO2,CO and CH4. The Mamdani algorithm has been applied to the training of the fuzzy system and the test set was used to evaluate the performance of the system including R2,ARE,AARE and SD.The results demonstrated that the predicted values from the model were in good consistency with the experimental data.The work indicates how fuzzy inference system(FIS),as a promising predicting technique,would be effectively used in FTS.     

Antimicrobial prospect of newly synthesized 1,3-thiazole derivatives

A new series of 1,3-thiazole and benzo[d]thiazole derivatives 10-15 has been developed, characterized, and evaluated for in vitro antimicrobial activity at concentrations of 25-200 μg/mL against Gram+ve organisms such as methicillin-resistant Staphylococcus aureus (MRSA), Gram-ve organisms such as Escherichia coli (E. coli), and the fungal strain Aspergillus niger (A. niger) by the cup plate method. Ofloxacin and ketoconazole (10 μg/mL) were used as reference standards for antibacterial and antifungal activity, respectively. Compounds 11 and 12 showed notable antibacterial and antifungal activities at higher concentrations (125-200 μg/mL), whereas benzo[d]thiazole derivatives 13 and 14 were found to display significant antibacterial or antifungal activity (50-75 μg/mL) against the Gram+ve, Gram-ve bacteria, or fungal cells used in the present study. In addition, a correlation between calculated and determined partition coefficient (log P) was established which allows future development of compounds within this series to be carried out based on calculated log P values. Moreover, compounds 13 and 14 show that the optimum logarithm of partition coefficient (log P) should be around 4.     

Melamine-(H_2SO_4)_3 and PVP-(H_2SO_4)_n as solid acids:Synthesis and application in the first mono-and di-nitration of bisphenol A and other phenols

Melamine and poly vinylpyrrolidone（PVP） reacted with neat sulfuric acid readily to form two new organic solid acids namely melamine-（H₂SO₄）₃ and PVP-（H₂SO₄）_n.These solid acids were used for the first nitration of bisphenol A as well as other phenols in the presence of NH₄NO₃.Mono- and di-nitro bisphenol A have been characterized with IR and ¹H NMR techniques.     

P-Dodecylbenzenesulfonic acid(DBSA),a Brфnsted acid-surfactant catalyst for Biginelli reaction in water and under solvent free conditions

We report herein the use of p-dodecylbenzenesulfonic acid(DBSA) as a catalyst for a one-pot Biginelli reaction to afford 3,4- dihydropyrimidinone derivatives in good to excellent yields.This reaction proceeds efficiently in water and under solvent free conditions.Comparisons of results indicate that although the yields are high and comparable for both methods,the reaction times are considerably shorter under solvent free conditions.     

Simultaneous determination of levodopa, NADH, and tryptophan using carbon paste electrode modified with carbon nanotubes and ferrocenedicarboxylic acid

The redox response of a modified carbon nanotube paste electrode of ferrocenedicarboxylic acid was investigated. Cyclic voltammetry, differential pulse voltammetry, and chronoamperometry were used to investigate the electrochemical behavior of levodopa (LD) at modified electrode. Under the optimized conditions (pH 5.0), the modified electrode showed high electrocatalytic activity toward LD oxidation; the overpotential for the oxidation of LD was decreased by more than 190 mV, and the corresponding peak current increased significantly. Differential pulse voltammetric peak currents of LD increased linearly with its concentrations at the range of 0.04 to 1,100 μM, and the detection limit (3σ) was determined to be 12 nM. The diffusion coefficient ( D = 9.2 ×10 ^{- 6}cm²/s ) \left( {D = {9}.{2} \times {1}{0^{ - {6}}}{\hbox{c}}{{\hbox{m}}^2}/{\hbox{s}}} \right) and transfer coefficient (α = 0.49) of LD were also determined. Mixture of LD, NADH, and tryptophan (TRP) can be separated from one another by differential pulse voltammetry. These conditions are sufficient to allow determination of LD, NADH, and TRP both individually and simultaneously. The modified electrode showed good reproducibility, remarkable long-term stability, and especially good surface renewability by simple mechanical polishing. The results showed that this electrode could be used as an electrochemical sensor for determination of LD, NADH, and TRP in real samples such as urine and water samples.     

Applying density functional theory on tautomerism in 3,4-dihydropyrimidin-2(1H)-ones

In the present study, the density functional theory (DFT) and Gibbs free energy calculations were performed to investigate the stability and tautomerism of C4-substituted-3,4-dihydropyrimidin-2(1H)-ones. Three different forms are possible for the ethyl 3,4-dihydropyrimidinones (ethyl 4-aryl-6-methyl-3,4-dihydropyrimidin-2(1H)-one-5-carboxylates, ethyl 4-aryl-2-hydroxy-6-methyl-1,4-dihydropyrimidine-5-carboxylates and ethyl 4-aryl-2-hydroxy-6-methyl-3,4-dihydropyrimidine-5-carboxylates) forms that the most stable form is ethyl 4-aryl-6-methyl-3,4-dihydropyrimidin-2 (1H)-one-5-carboxylates (keto-form). The obtained data showed that the substitution on the C4-substitut position can be effective on the equilibrium constant (K _eq).     

Three component tandem reactions involving protected 2-amino indoles, disubstituted propargyl alcohols, and I2/ICl: iodo-reactant controlled synthesis of dihydro-α-carbolines and α-carbolines via iodo-cyclization/iodo-cycloelimination

Two simple, highly efficient three component tandem reactions for the synthesis of diversified N^aN^b di-carbamate-4,9-dihydro-3-iodo-α-carbolines and N^a-carbamate-3-iodo-α-carbolines have been described. The strategy involves one-pot condensation of bis-carbamate protected 2-amino indoles with disubstituted propargyl alcohols and I₂/ICl. The salient feature of the reaction involves iodocyclo-elimination of N^b-linked carbamate under mild condition in the final step.     

Nanoporous carbons as promising novel methane adsorbents for natural gas technology

Nanoporous carbons were synthesized using furfuryl alcohol and sucrose as precursors and MCM-41 and mordenite as nanoporous templates.The produced nanoporous carbons were used as adsorbent for methane storage.The average pore diameter of the samples varied from 3.9 nm to 5.9 nm and the BET surface area varied from 320m2/g to 824m2/g.The volumetric adsorption experiments revealed that MCM-41 and sucrose had better performance compared with mordenite and furfuryl alcohol,correspondingly.Also,the effect of precursor to template ratio on the structure of nanoporous carbons and their adsorption capacities was investigated.The nanoporous carbon produced from MCM-41 mesoporous molecular sieve partially filled by sucrose shows the best methane adsorption capacity among the tested samples.     

Precipitation of hematite nanoparticles via reverse microemulsion process

Hematite nanoparticles have been successfully synthesized via two processing routes:(i) conventional precipitation route and (ii) reverse microemulsion route.The particle precipitation was carried out in a semibatch reactor.A microemulsion system consisting of water,chloroform,1-butanol and surfactant was loaded with iron nitrates to form iron nanoparticles precipitation.The precipitation was performed in the single-phase microemulsion operating region.Three technical surfactants,with different structure and HLB value are employed.The influence of surfactant characterization on the size of produced iron oxide particle has been studied to gain a deeper understanding of the important controlling mechanisms in the formation of nanoparticles in a microemulsion.Transmission electron microscopy (TEM),surface area,pore volume,average pore diameter,pore size distribution and XRD were used to analyze the size,size distribution,shape and structure of precipitated iron nanoparticles.