Rapid Estimation of Octanol–Water Partition Coefficient for Triazole Fungicides by MEKC with Sodium Deoxycholate as Surfactant

A rapid estimation of octanol–water partition coefficient (log P _ow) was developed for triazole fungicides by micellar electrokinetic chromatography (MEKC). Five standard compounds with known log P _ow values from 2.9 to 4.3 (cyproconazole, bromuconazole, epoxiconazole, bitertanol and difenoconazole) were used for constructing the calibration curve of the log P _ow against the MEKC retention factor, log k. A linear relationship was achieved between log P _ow and log k, in the MEKC system containing 40 mM sodium deoxycholate (SDC) and 4 mM borate buffer at pH 9.3, with a correlation of determination, r ² = 0.9905. The log P _ow values of four test compounds of triazole fungicides (triadimenol, myclobutanil, propiconazole and penconazole) were calculated based on the log k values measured by MEKC and the slope and intercept of the calibration curve. This MEKC method can give good estimation of the log P _ow of the four test compounds of triazole fungicides with the differences between the literature log P _ow values and estimated log P _ow from the MEKC method were from 0.15 to 0.23 log units.     

Cellulose surface grafting with polycaprolactone by heterogeneous click-chemistry

This work deals with a new approach of grafting cellulose surface fibres by polycaprolactone macromolecular chains in heterogeneous conditions via click-chemistry. Thus, cellulose esters were prepared by reacting Avicel with undecynoic acid, in order to prepare cellulose substrate bearing multiple CC-terminated hairs. The prepared modified Avicel substrates were characterised by FTIR, XPS spectroscopy, elemental analyses and showed that the grafting have indeed occurred. The degree of substitution of the prepared cellulose esters was around 0.1. In parallel, polycaprolactone-diol (PCL) was converted to azido-derivative and the ensuing products characterised by FTIR and ¹³C-NMR spectroscopy. Both methods confirmed the success of such modification. Finally, cellulose esters were reacted with azido-PCL grafts in heterogeneous conditions through “click chemistry”. The thus prepared modified cellulose substrates were characterized by FTIR and XPS spectroscopy as well as elemental analyses. The three techniques confirmed the occurrence of the grafting. A weight gain of 20% was achieved.     

Vapochromic behavior of {Ag2(Et2O)2[Au(C6F5)2]2}n with volatile organic compounds

The vapochromic behaviors of {Ag2L2[Au(C6F5)2]2}n (L = Et2O (1), Me2CO (2), THF (3), CH3CN (4)) were studied. {Ag2L2[Au(C6F5)2]2}n (L = Et2O (1)) was synthesized by the reaction of [Bu4N][Au(C6F5)2] with AgOClO3 in 1:1 molar ratio in CH2Cl2/Et2O (1:2). 1 was used as starting material with THF to form {Ag2L2[Au(C6F5)2]2}n (L = THF (3)). 3 crystallizes in the monoclinic space group C2/c and consists of tetranuclear units linked together via aurophilic contacts resulting in the formation of a 1D polymer that runs parallel to the crystallographic z axis. The gold(I) atoms are linearly coordinated to two pentafluorophenyl groups and display additional Au...Ag close contacts within the tetranuclear units with distances of 2.7582(3) and 2.7709(3) A. Each silver(I) center is bonded to the two oxygen atoms of the THF molecules with a Ag-O bond distance of 2.307(3) A. TGA analysis showed that 1 loses two molecules of the coordinated solvent per molecular unit (1st one: 75-100 degrees, second one: 150-175 degrees C), whereas 2, 3, and 4 lose both volatile organic compounds (VOCs) and fluorinated ligands in a less well defined manner. Each complex loses both the fluorinated ligands and the VOCs by a temperature of about 325 degrees C to give a 1:1 gold/silver product. X-ray powder diffraction studies confirm that the reaction of vapors of VOCs with 1 in the solid state produce complete substitution of the ether molecules by the new VOC. The VOCs are replaced in the order CH3CN > Me2CO > THF > Et2O, with the ether being the easiest to replace. {Ag2(Et2O)2[Au(C6F5)2]2}n and {Ag2(THF)2[Au(C6F5)2]2} n both luminesce at room temperature and at 77 K in the solid state. Emission maxima are independent of the excitation wavelength used below about 500 nm. Emission maxima are obtained at 585 nm (ether) and 544 nm (THF) at room temperature and at 605 nm (ether) and 567 nm (THF) at 77 K.     

Gold(I)-dithioether supramolecular polymers: synthesis, characterization, and luminescence

A series of discrete compounds and supramolecular polymers were synthesized by self-assembly of dithioether building blocks and HAuCl4.3H2O. In complexes 1 {[AuL(1-Me)Cl], where L(1-Me) is bis(methylthio)methane} and 2 {[Au2L(2-Ph)Cl2], where L(2-Ph) is 1,2-bis(phenylthio)ethane}, adjacent units are connected via aurophilic interactions. Complex 1, a one-dimensional (1D) supramolecular polymer, and complex 2, a two-dimensional supramolecular network, both feature nearly linear [Au-Au-](infinity) chains. Complexes 4a, 4b, and 4c, all of which contain 1,3-bis(phenylthio)propane (L(3-Ph)), are polymorphs having the composition [Au2L(3-Ph)Cl2]. Complex 3 {[Au2L(1-Ph)Cl2], where L(1-Ph) is bis(phenylthio)methane}and complexes 4a and 4b consist of nearly identical 1D supramolecular polymers formed through Au-Au interactions. The third polymorph, 4c, is a molecular complex, as it does not have metal-metal interactions. Complex 5 {[Au2L(4-Ph)Cl2], where L(4-Ph) is 1,4-bis(phenylthio)butane} is also molecular. UV-vis spectra showed that the absorption bands of these complexes are allowed ligand-centered transitions between 230 and 260 nm. Complexes 1, 2, and 6 {[AuL(3-Me)Cl], where L(3-Me) is 1,3-bis(methylthio)propane} exhibited solid-state luminescence at 5 K with vibronic progressions and band maxima at approximately 570 nm. It is suggested that complex 6 contains [Au-Au-](infinity) chains.     

High-Performance Organic Field-effect Transistors from Functionalized Zinc Meso-Porphyrins

A series of new zinc porphyrins were synthesized, and their charge transport property was tuned by introducing various groups. Triarylamine was introduced to the porphyrin moiety at the meso-position as an electron donor, enhancing the charge carrier mobility. All the synthesized zinc porphyrins are thermally stable with a decomposition temperature over 178 °C. High frontier molecular orbitals levels of these compounds make them stable donor materials. SEM analysis of zinc porphyrins fabricated by spin-coating resulted in diversely self-assembled films. Field-effect transistors were fabricated using bottom-gate/top-contact architecture (BGTC) by solution-processable technique. The higher charge carrier mobility of 5.17 cm²/Vs with on/off of 10⁶ was obtained for trifluoromethyl substituted compound due to better molecular packing. In addition, GIXRD analysis revealed zinc porphyrins films crystalline nature, which supports its better charge carrier mobility. The present investigation has validated that zinc porphyrin building blocks are an attractive candidate for p-channel OFET devices.     

Selective extraction of apixaban from plasma by dispersive solid-phase microextraction using magnetic metal organic framework combined with molecularly imprinted polymer nanocomposite

This research aims to synthesize a specific and efficient sorbent to use in the extraction of apixaban from human plasma samples and its determination by high-performance liquid chromatography-tandem mass spectrometry. High specific surface area of metal-organic framework, magnetic property of iron oxide nanoparticles, selectively of molecular imprinted polymer toward the analyte, and the combination of dispersive solid-phase extraction method with a sensitive analysis system provided an efficient analytical method. In this study, first, a molecularly imprinted polymer combined with magnetic metal organic framework nanocomposite was prepared and then characterized using different techniques. Then the sorbent particles were used for selective extraction of the analyte from plasma samples. The efficiency of the method was improved by optimizing effective parameters. According to the validation results, wide linear range (1.02–200 ng mL⁻¹), acceptable coefficient of determination (0.9938), low limit of detection (0.32 ng mL⁻¹) and limit of quantification (1.02 ng mL⁻¹), high extraction recovery (78%), and good precision (relative standard deviations ≤ 2.9% for intra- (n = 6) and interday (n = 6) precisions) were obtainable using the proposed method. These outcomes showed the high potential of the proposed method for screening apixaban in the human plasma samples.     

Development of Polar Order in the Liquid Crystal Phases of a 4‐Cyanoresorcinol‐Based Bent‐Core Mesogen with Fluorinated Azobenzene Wings

A bent‐core mesogen consisting of a 4‐cyanoresorcinol unit as the central core and laterally fluorinated azobenzene wings forms four different smectic LC phase structures in the sequence SmA–SmC_s–SmC_sP_AR–M, all involving polar SmC_sP_S domains with growing coherence length of tilt and polar order on decreasing temperature. The SmA phase is a cluster‐type de Vries phase with randomized tilt and polar direction; in the paraelectric SmC_s phase the tilt becomes uniform, although polar order is still short‐range. Increasing polar correlation leads to a new tilted and randomized polar smectic phase with antipolar correlation between the domains (SmC_sP_AR) which then transforms into a viscous polar mesophase M. As another interesting feature, spontaneous symmetry breaking by formation of a conglomerate of chiral domains is observed in the non‐polar paraelectric SmC_s phase.     

Intertwining Operators Associated to a Family of Differential-Reflection Operators

Mediterranean Journal of Mathematics - We introduce a family of differential-reflection operators $${\Lambda_{A, \varepsilon}}$$ acting on smooth functions defined on $${{\mathbb R}}$$ . Here, A is...     

Roller bearing acoustic signature extraction by wavelet packet transform,applications in fault detection and size estimation

Continuous online monitoring of rotating machines is necessary to assess real-time health conditions so as to enable early detection of operation problems and thus reduce the possibility of downtime. Rolling element bearings are crucial parts of many machines and there has been an increasing demand to find effective and reliable health monitoring technique and advanced signal processing to detect and diagnose the size and location of incipient defects. Condition monitoring of rolling element bearings, comprises four main stages which are, statistical analysis, fault diagnostics, defect size calculation, and prognostics. In this paper the effect of defect size, operating speed, and loading conditions on statistical parameters of acoustic emission (AE) signals, using design of experiment method (DOE), have been investigated to select the most sensitive parameters for diagnosing incipient faults and defect growth on rolling element bearings. A modified and effective signal processing algorithm is designed to diagnose localized defects on rolling element bearings components under different operating speeds, loadings, and defect sizes. The algorithm is based on optimizing the ratio of Kurtosis and Shannon entropy to obtain the optimal band pass filter utilizing wavelet packet transform (WPT) and envelope detection. Results show the superiority of the developed algorithm and its effectiveness in extracting bearing characteristic frequencies from the raw acoustic emission signals masked by background noise under different operating conditions. To experimentally measure the defect size on rolling element bearings using acoustic emission technique, the proposed method along with spectrum of squared Hilbert transform are performed under different rotating speeds, loading conditions, and defect sizes to measure the time difference between the double AE impulses. Measurement results show the power of the proposed method for experimentally measuring size of different fault shapes using acoustic emission signals.     

A relationship between the space of orthomorphisms and the centre of a vector lattice revisited

In (Chil et al. Positivity, 2014), the authors claim to give a counterexample to the main result, about Wickstead’s question, in a recent paper of Toumi (see Theorem 3, When orthomorphisms are in the ideal center, Positivity 18(3):579–583, 2014). In this note we show that their example is consistent with the main result of Toumi and not a counterexample.