Remarkable facets for selective monitoring of biomolecules by morphologically tailored CuO nanostructures

Journal of Solid State Electrochemistry - Remarkable selective analysis of biomolecules i.e., glucose and ascorbic acid on copper oxide facets was reported for the first time. The copper oxide...     

Enhancing techniques for learning decision trees from imbalanced data

Advances in Data Analysis and Classification - Several machine learning techniques assume that the number of objects in considered classes is approximately similar. Nevertheless, in real-world...     

Synthesis,molecular modeling,TD-DFT,antimicrobial, and in vitro therapeutic activity of new spherical nano-sized sulfonamide imine ligands and their zinc (II) and copper (II) complexes

A series of nanometer-sized spherical sulfonamide imine ligands HL ¹ -HL ⁵ and their copper and zinc complexes were synthesized and fully characterized based on elemental analyses, spectroscopic (UV/vis, FT-IR, NMR, EPR, SEM) studies, molar conductance and thermal analyses. Furthermore, computational studies of HL ¹ -HL ⁵ were carried out by the DFT/B3LYP method. TD-DFT, HOMO and LUMO energy values, chemical hardness, electronegativity, electrophilic index, softness, and other parameters were calculated. Screening against several pathogenic microorganisms indicated that HL ¹ exhibited high activity against the tested Gram-negative bacteria relative to other analogues and the inhibition activity is greater than the standard Gentamicin. Analogously, HL ² exhibited high potent activity against the tested Gram-positive bacteria. Copper complexes exhibited a higher potent activity than zinc analogues. Noteworthy, inhibition activity of [Cu ( L ³ )(OAc)] complex is higher than that of the standard Ampicillin. [Cu ( L ² )(OAc)] complex displayed a similar activity of the standard bactericides and fungicides in use. The complexes showed appreciated values of MIC against bacterial strains: B. subtilis (MIC = 0.4 μg / mL), E. coli and S. pneumonia (MIC = 1.95 μg / mL) and P. aeruginosa (MIC = 7.81 μg / mL). in vitro cytotoxic activities study proved that [Cu ( L ³ )(OAc)] complex exhibited appreciable activity versus (HEPG-2); IC₅₀ = 4.8 μg/ml, while [Cu( L ² )(OAc)] complex showed a high activity against (MCF-7); IC₅₀ = 6.2 μg/ml. These results could be considered as new findings of promising antitumor candidates for experimental chemotherapy.     

Improved photoelectrochemical hydrogen production over decorated titania with copper and nickel oxides by optimizing the photoanode and reaction characteristics

We optimized photocatalytic hydrogen production over TiO₂-based photocatalyst by varying the dopant (nickel and copper oxide), thin film active area, nature and concentration of sacrificial agents, and light intensity in a photoelectrochemical (PEC) cell/dye-sensitized solar cell (DSSC). Various characterization techniques have been used to investigate the structural, morphological, optical, and PEC behavior of single and codoped TiO₂. The TiO₂ decorated with both Cu and Ni oxides with active area of 1 cm² in a mixture of 5 vol % glycerol and 1 M KOH under light intensity of 100 mWcm^?2 produced the maximum hydrogen of 338.4 μmol cm^?2 for 2 h. The superior photocatalyst performance of this photocatalyst is attributed to its small crystallite size and large pore size, as confirmed by X-ray diffractometer, Transmission electron microscopy (TEM), and surface area of Brunauer-Emmet-Teller (S_BET). The absorption edges of this photocatalyst had the highest red shift compared with single doped and pure TiO₂ because of more indirect transitions of the photoexcited electrons, greater charge carrier separation, and lower recombination rate. The photoanode active area of 1 cm² with better photocatalytic performance correlated with the number of defects and grain boundaries. Glycerol shifted the conduction band of the photocatalyst to more negative flat potential compared with others. Increasing the concentration of glycerol further than 5 vol% saturated the photocatalyst active sites, increased photooxidation intermediates of glycerol, and reduced the hydrogen production. The light intensity had the maximum impact on the hydrogen production and could strongly control the number of charge carriers in both the PEC cell and the DSSC.     

Free vibration analysis of linear particle chain impact damper

Impact dampers have gained much research interest over the past decades that resulted in several analytical and experimental studies being conducted in that area. The main emphasis of such research was on developing and enhancing these popular passive control devices with an objective of decreasing the three parameters of contact forces, accelerations, and noise levels. To that end, the authors of this paper have developed a novel impact damper, called the Linear Particle Chain (LPC) impact damper, which mainly consists of a linear chain of spherical balls of varying sizes. The LPC impact damper was designed utilizing the kinetic energy of the primary system through placing, in the chain arrangement, a small-sized ball between each two large-sized balls. The concept of the LPC impact damper revolves around causing the small-sized ball to collide multiple times with the larger ones upon exciting the primary system. This action is believed to lead to the dissipation of part of the kinetic energy at each collision with the large balls.     

Simultaneous Analysis of a Ternary Mixture of Pharmaceuticals Containing Trimethoprim,Sulphamethoxazole, and Phenazopyridine Hydrochloride Using Third-Derivative and Zero-Order Photodiode Array Spectrophotometry

A simple and rapid method for the simultaneous analysis of a ternary mixture containing trimethoprim, sulphamethoxazole and phenazopyridine hydrochloride is reported. The procedure consists of extraction in 0.1 M hydrochloric acid, filteration and measurement of the amplitudes of the third-derivative spectra at 242 and 276 nm and the absorbance at 450 nm for the determination of trimethoprim, sulphamethoxazole and phenazopyridine hydrochloride, respectively. Good linearity, accuracy, precision and selectivity were found, and the method is proposed for routine quality control purposes, even for the uniformity of contents test.     

Low temperature,atmospheric pressure,direct current microplasma jet operated in air,nitrogen and oxygen

Micro-plasma jets in atmospheric pressure molecular gases (nitrogen, oxygen, air) were generated by blowing these gases through direct current microhollow cathode discharges (MHCDs). The tapered discharge channel, drilled through two 100 to 200 μm thick molybdenum electrodes separated by a 200 μm thick alumina layer, is 150 to 450 μm in diameter in the cathode and has an opening of 100 to 300 μm in diameter in the anode. Sustaining voltages are 400 to 600 V, the maximum current is 25 mA. The gas temperature of the microplasma inside the microhollow cathode varies between ~2000 K and ~1000 K depending on current, gas, and flow rate. Outside the discharge channel the temperature in the jet can be reduced by manipulating the discharge current and the gas flow to achieve values close to room temperature. This cold microplasma jet can be used for surface treatment of heat sensitive substances, and for sterilization of contaminated areas.     

Finite element analysis of hydromagnetic flow and heat transfer of a heat generation fluid over a surface embedded in a non-Darcian porous medium in the presence of chemical reaction

An analysis is carried out to study the flow, chemical reaction and mass transfer of a steady laminar boundary layer of an electrically conducting and heat generating fluid driven by a continuously moving porous surface embedded in a non-Darcian porous medium in the presence of a transfer magnetic field. The governing partial differential equations are converted into ordinary differential equations by similarity transformation and are solved numerically by using the finite element method. The results obtained are presented graphically for velocity, temperature and concentration profiles, as well as the Sherwood number for various parameters entering into the problem.     

Theoretical and experimental investigations of complexation with BF3.Et2O effects on electronic structures,energies and photophysical properties of Anil and tetraphenyl (hydroxyl) imidazol

The novel compounds (E)‐2‐(((4‐hydroxyphenyl)imino)methyl)phenol, Tetraphenyl (hydroxyl) imidazole and their corresponding Boron difluoride complexes were synthesized and characterized by spectroscopic techniques. Density functional theory calculations at B3LYP‐D3/6–311++G (d, p) level of theory were performed for the geometric parameters. The MEP surface studies were used to understand the behavior of molecules in terms of charge transfer and to determine how these molecules interact. We used the GIAO and the B3LYP‐D3 with a 6–311++ G (d, p) basis set to simulate the (¹H‐NMR and ¹⁹F‐NMR) and the IR spectra, respectively. The corresponding calculated results are in good agreement with the experimental data. The stability of the molecule arising from hyperconjugation interaction and charge delocalization were analyzed using NBO analysis. FMOs revealed the occurrence of charge transfer within the molecule. The complexation using BF₃.Et₂O was also found to have remarkable effects on the electrochemical properties of the studied molecules, where (b) and (d) present lower chemical stability, higher reactivity and higher polarizability than (a) and (c), respectively. Moreover, the energy gap of (a) and (c) decreased after complexation using BF₃.Et₂O, indicating the reliability of the electrochemical evaluation of LUMO and HOMO energy levels. These values are the factors explaining the possible charge transfer interaction within the molecule. The absorption and emission spectra of the model compound were also simulated and compared to experimental observations in the DMF solvent. The results of DFT calculations supported the structural and spectroscopic data and confirmed the structure modification of frontier molecular orbitals for BF₂ complexes as well as tunable potentials and energy levels.     

Modified helium pulse-operated microwave induced plasma for spectrochemical analysis of liquid samples

To minimize problems caused by sample introduction into helium pulse operated microwave-induced plasma (He-pulsed-MIP), a simple plasma torch was developed. This torch is constructed from commonly available components with an absolute minimum of machining. In this torch, plasma is kept operating by partially isolating it from the rest of the plasma (within the plasma chamber). This auxiliary plasma is by-passed during sample or solvent injection and is therefore not affected. The design of this discharge chamber was thoroughly examined and each parameter affecting its analytical performance was evaluated. Measurements reported include effect of helium flow rate, discharge tube position and microwave power on analytical performance. Analytical calibration curves and detection limits data are shown for Ca, Cd, Cr, Cu, Fe, Mg, Ni and Zn. Plasma excitation temperature was determined using iron and copper as thermometric species. Finally, the present technique was applied to the analysis of real biological samples (liver, brain, heart, bone, kidney, tests, serum, spleen and muscles of white albino rats). The results were compared with those obtained using flame atomic absorption spectroscopy.