Hygrometric Determination of Water Activities and Osmotic and Activity Coefficients of NH4Cl–LiCl–H2O at 25°C

The mixed aqueous electrolyte system of ammonium and lithium chlorides has been studied by the hygrometric method at 25°C. The relative humidities of this system are measured at total molalities from 0.3 to 6 mol-kg^{– 1} for different ionic-strength fractions y of NH₄Cl with y = 0.33, 0.50, and 0.67. The data obtained allow the deduction of new water activities and osmotic coefficients. The experimental results are compared with the predictions of the ECA (extended composed additivity) law proposed in our previous work. The Zdanovskii–Stokes–Robinson (ZSR), the Robinson–Stokes (RS), Reilly–Wood–Robinson (RWR), the Pitzer, and the Lietzke–Stoughton (LS II) models are also compared with our results. Predictions made using these models are, in general, consistent with our results. From these measurements, new Pitzer mixing ionic parameters are determined and used to predict the solute activity coefficients in the mixture for different ionic-strength fractions.     

Lithiation of 2-Alkyl-3-amino- and 2-Alkyl-3-(methylamino)-4(3H)-quinazolinones(1)

3-Amino-2-methyl-4(3H)-quinazolinone has been doubly lithiated, on nitrogen and in the 2-methyl group, with n-butyllithium. The lithium reagent thus obtained reacts with a variety of electrophiles (D(2)O, benzophenone, cyclohexanone, cyclopentanone, acetophenone, benzaldehyde, tetraisopropylthiuram disulfide (TITD)) to give the corresponding 2-substituted derivatives in very good yields. Reactions of the dilithio reagent with 2 molar equiv of methyl iodide or phenyl isocyanate give disubstituted derivatives. Double lithiation of the 2-ethyl and 2-propyl analogues have been achieved using LDA, and subsequent reactions with most electophiles are then similar. In the reaction of the dianion of the 2-ethyl compound with TITD, deamination from position 3 takes place with the formation of the 2-substituted derivative. In reactions with prochiral ketones, the dianion of the 2-ethyl compound gives very high diastereoselectivity. Lithiation and subsequent reactions of 3-(methylamino) analogues take place in a similar manner, thus providing access to a range of substituted 3-(methylamino)-2-alkyl-4(3H)-quinazolinones by a general procedure. Lithiation of 3-(dimethylamino)-2-ethyl-4(3H)-quinazolinone did not take place under similar conditions. Lithiation of 3-amino-2-unsubstituted-4(3H)-quinazolinone was also unsuccessful.     

Effect of an admixture on the electrical and thermal properties of triglycine sulphate crystals

The influence of chloroacetic acid amide (AC) on the temperature-dependence of the electrical conductivity (), thermal expansion (_ij) and specific heat ((C _p) of triglycine sulphate crystals was studied in the phase transition range (T _c=49°). The addition of isostructural AC increased the electrical conductivity, decreased the thermal expansion and changed theC _p peak. The mechanism is discussed on a thermodynamic basis.

---

Zusammenfassung Der Einfluß der Zumischung von Chloressigsäureamid (AC) auf die Temperaturabhängigkeit der elektrischen Leitfähigkeit, der Wärmeausdehnung _ij und der spezifischen WärmeC _p von Triglycinsulfat-Kristallen wurde im Phasenübergangsgebiet (T _c=49 °C) untersucht. Die Beimischung von isostrukturellem AC erhöht die elektrische Leitfähigkeit und vermindert die Wärmeleitfähigkeit, während derC _p-Peak verändert wird. Der Mechanismus kann thermodynamisch diskutiert werden.

---

(), () _ij) () , T _c=49°. , , , , C _p. .

     

Spectrophotometric studies on the complexation equilibria of Ni and Pb with 2-carboxy-2-hydroxy-5'-sulfo-formazylbenzene. Simultaneous determination of trace amounts of Ni and Pb

Spectrophotometric studies have been made to investigate the reaction of Nickel and Lead with 2-carboxy-2'-hydroxy-5'-sulfoformazyl-benzene (zincon) in 50%(v/v) ethanol-water at 25 degrees C and an ionic strength of 0.1 M NaClO4. A complete picture of the complexation equilibria in the pH range (4.2-12.0) for nickel and (1.9-11.5) for lead are presented. Simple, rapid, selective and sensitive methods for the spectro-photometric determination of nickel and lead has been developed based on the color reaction of their complexes with zincon. The methods allow the determination of 4.69 microg mL(-1) of nickel at pH = 6.3 (lambdamax = 665 nm) and 10.3 microg ml(-1) of lead at pH = 5.6 (lambdamax = 610 nm). The apparent molar absorptivities were epsilon = 1.3 x 10(4) L mol(-1) cm(-1) for nickel and epsilon = 0.6 x 10(4) L mol(-1) cm(-1) for lead. The interference of a large number of foreign ions and complexing agents has been studied. Thiosulphate, as masking agent allows the simultaneous determination of nickel and lead in the presence of high concentrations of copper. Ascorbic acid, sodium cyanide and or sodium fluoride provide the elimination of many other interferences. The methods have been applied successfully to the simultaneous determination of nickel and lead in an aluminium and non-ferrous alloy.     

The unexpected rearrangement of 1,5‐benzodiazepin‐2,4‐dione to a benzimidazol‐2‐one derivative during N,N'‐diglucosylation

Reaction of 1,5‐benzodiazepin‐2,4‐dione with 3‐O‐substituted‐5,6‐anhydro‐1,2‐isopropylidene‐α‐D‐glucofuranose gave the unexpected N,N'‐di‐glucofuranosyl benzimidazol‐2‐one by a novel rearrangement and ring closure reaction. A mechanism is proposed.     

Challenges in validating the sterilisation dose for processed human amniotic membranes

Most of the tissue banks in the Asia Pacific region have been using ionising radiation at 25 kGy to sterilise human tissues for save clinical usage. Under tissue banking quality system, any dose employed for sterilisation has to be validated and the validation exercise has to be a part of quality document. Tissue grafts, unlike medical items, are not produced in large number per each processing batch and tissues relatively have a different microbial population. A Code of Practice established by the International Atomic Energy Agency (IAEA) in 2004 offers several validation methods using smaller number of samples compared to ISO 11137 (1995), which is meant for medical products. The methods emphasise on bioburden determination, followed by sterility test on samples after they were exposed to verification dose for attaining of sterility assurance level (SAL) of 10⁻¹. This paper describes our experience in using the IAEA Code of Practice in conducting the validation exercise for substantiating 25 kGy as sterilisation dose for both air-dried amnion and those preserved in 99% glycerol.     

Kinetic studies on the solvolysis and axial ligand substitutions of bis-triphenylphosphine(cyclohexane-1,2-dione-dioximato)ruthenium(II) in non-aqueous solvents

Kinetic studies of ligand substitutions of the six-coordinated Ru^II pseudo-macrocyclic complex [Ru(CHDH)₂- (PPh₃)₂] (CHDH=cyclohexanedione-dioximato) have been spectrophotometrically investigated in a variety of solvents and at 70, 80, 85 and 90°C. The reactions studied are of the form:[(PPh₃)Ru(CHDH)₂(PPh₃)] + L =[(PPh₃)Ru(CHDH)₂L] + PPH₃ where L is imidazole, pyridine, piperidine or thiophene or a solvent molecule (PhCl, PhMe, MeCN, DMSO or DMF). The solvolysis reactions with chlorobenzene and toluene proceed to an equilibrium position favoring the bis-triphenylphosphine complex. All other reactions proceed to completion. From a mechanistic point of view the reactions were found to proceed through the formation of a five coordinate intermediate that possesses little or no discriminating ability towards the incoming nucleophiles. The rate data were thus interpreted in terms of a dissociative (D) or dissociative interchange (Id) mechanism. Activation parameters H and S are reported. Preliminary studies on the solvatochromic behavior of [Ru(CHDH)₂(PPh₃)₂] and the corresponding mixed complexes are discussed.     

Synthesis of new thiazole analogues of pyochelin, a siderophore of Pseudomonas aeruginosa and Burkholderia cepacia. A new conversion of thiazolines into thiazoles

Three pyochelin analogues and their methyl esters all containing a thiazole ring have been synthesised from the same Weinreb amide key intermediate. One of these analogues called HPTT-COOH, a molecule released in the course of pyochelin and yersiniabactin biosynthesis, was efficiently synthesised using a new base induced conversion of the key compound 2′-(2-hydroxyphenyl)-2′-thiazoline-4′-(N-methoxy,N-methyl) carboxamide into 2′-(2-hydroxyphenyl)-2′-thiazole-4′-(N-methoxy,N-methyl) carboxamide.     

Spectrofluorometric determination of certain quinolone antibacterials using metal chelation

Simple, rapid, reliable, and sensitive spectrofluorometric methods were developed for the determination of eight quinolone antibacterials namely ciprofloxacin, norfloxacin, lomefloxacin, difloxacin, amifloxacin, pefloxacin, ofloxacin, and nalidixic acid. The methods depend on the chelation of each of the studied drugs with zirconium, molybdenum, vanadium or tungsten to produce fluorescent chelates. Different factors affecting the relative fluorescence intensity of the resulting chelates were studied and optimised. At the optimum reaction conditions, the drug-metal chelates showed excitation maxima ranging from 274 to 295 nm and emission maxima ranging from 409 to 495 nm. The chelates were found to be stable at room temperature for 2 days and show good stability upon increasing temperature to 50 °C for about 1 h. Rectilinear calibration graphs were obtained in the range of 10-60 ng ml⁻¹ for each of the investigated drugs and the limits of detection and quantitation ranged from 1.214 to 2.046 and from 4.047 to 6.819 ng ml⁻¹, respectively. The molar ratios of the formed chelates were determined by Job's method and their association constants were also calculated. The developed methods were applied successfully for the determination of the studied drugs in their pharmaceutical dosage forms with a good precision and accuracy compared to official and reported methods as revealed by t- and F-tests. They were also applied for the determination of studied drugs in spiked urine and plasma samples.     

A novel strategy towards the asymmetric synthesis of orthogonally funtionalised 2-N-benzyl-N-alpha-methylbenzylamino- 5-carboxymethyl-cyclopentane-1-carboxylic acid

The asymmetric synthesis of the orthogonally funtionalised compounds tert-butyl 2-N-benzyl-N-alpha-methylbenzylamino-5-methoxycarbonylmethylcyclopentane- 1-carboxylate and methyl 2-N-benzyl-N-alpha-methylbenzylamino-5-carboxymethylcyclo- pentane-1-carboxylate by a domino reaction of tert-butyl methyl (E,E)-octa-2,6- diendioate with lithium N-alpha-methylbenzyl-N-benzylamide initiated by a Michael addition, subsequent 5-exo-trig intramolecular cyclisation and posterior selective hydrolysis with trifluoroacetic acid is reported.