Distortion-free single point imaging of multi-layered composite sandwich panel structures

The results of a magnetic resonance imaging (MRI) investigation concerning the effects of an aluminum honeycomb sandwich panel on the B1 and B0 fields and on subsequent image quality are presented. Although the sandwich panel structure, representative of an aircraft composite material, distorts B0 and attenuates B1, distortion-free imaging is possible using single point (constant time) imaging techniques. A new expression is derived for the error caused by gradient field distortion due to the heterogeneous magnetic susceptibility within a sample and this error is shown not to cause geometric distortion in the image. The origin of the B0 distortion in the sample under investigation was also examined. The graphite-epoxy 'skin' of the panel is the principal source of the B0 distortion. Successful imaging of these structures sets the stage for the development of methods for detecting moisture ingress and degradation within composite sandwich structures.     

Photonic crystal channel drop filters with mirror cavities

In this paper, a new channel drop filter in two dimensional photonic crystals with mirror cavities is proposed. In the structure, three cavities are used. One is used for a resonant tunneling-based channel drop filter. The others are used to realize reflection feedback in the bus waveguide, which consists of a point defect micro-cavity side-coupled to a waveguide. The simulation results by using the finite-difference time-domain method conclude 98% output efficiency.     

Acid-induced gelation behavior of sonicated casein solutions

Casein gels were made from solutions sonicated by 24 and 130 kHz ultrasounds for 0, 60 and 120 min, followed by acidification with glucono-δ-lactone at 30 °C. The dynamics of gel formation were studied using rheological methods and microstructure of gels was monitored using scanning electron microscopy. Sonication postponed the gelation point to a lower pH value and increased the elasticity of freshly formed gels. It also resulted in gels with a more interconnected structure and smaller non-distinguishable particulates. This structure was especially dominant for the gel made from the solution already sonicated for 120 min.     

Comparison of theoretical and experimental results for band-gap-graded CZTSSe solar cell

The simulation of CZTSSe solar cells is presented in this paper. The simulation results are in reasonable agreement with the experimental data, indicating the reliability of simulation results. New structure is proposed to increase the functionality of the cell. Improved functional performances are achieved by inserting a P-Silicon (P-Si) layer as back surface field. Simulation results suggest that by inserting this P-Si layer, efficiency of the CZTSSe solar cell increases from 12.6% to 16.59%, which is a significant improvement. For the champion cell J_SC = 36.27 mA/cm², V_OC = 0.625 V and FF = 73.11% has been achieved.     

Dielectric Properties of Colossal-Dielectric-Constant Na1/2La1/2Cu3Ti4O12 Ceramics Prepared by Spark Plasma Sintering

In the current study, we report on the dielectric behavior of colossal-dielectric-constant Na_1/2La_1/2Cu₃Ti₄O₁₂ (NLCTO) ceramics prepared by mechanochemical synthesis and spark plasma sintering (SPS) at 850 °C, 900 °C, and 925 °C for 10 min. X-ray powder diffraction analysis showed that all the ceramics have a cubic phase. Scanning electron microscope observations revealed an increase in the average grain size from 175 to 300 nm with an increase in the sintering temperature. SPS NLCTO ceramics showed a room-temperature colossal dielectric constant (>10³) and a comparatively high dielectric loss (>0.1) over most of the studied frequency range (1 Hz–40 MHz). Two relaxation peaks were observed in the spectra of the electrical modulus and attributed to the response of grain and grain boundary. According to the Nyquist plots of complex impedance, the SPS NLCTO ceramics have semiconductor grains surrounded by electrically resistive grain boundaries. The colossal dielectric constant of SPS NLCTO ceramics was attributed to the internal barrier layer capacitance (IBLC) effect. The high dielectric loss is thought to be due to the low resistivity of the grain boundary of SPS NLCTO.     

Cytotoxicity of Shear Exfoliated Pnictogen (As,Sb, Bi) Nanosheets

The experimental achievement of phosphorene, which exhibits superior electronic, physical, and optical properties has spurred recent interest in other Group 15 elemental 2D nanomaterials such as arsenene, antimonene, and bismuthene. These unique and superior properties of the pnictogen nanosheets have spurred intensive research efforts and led to the discovery of their diversified potential applications; for instance, optical Kerr material, photonic devices, pnictogen-decorated microfibers, high-speed transistors, and flexible 2D electronics. Previous studies have mainly been dedicated to study the synthesis, properties, and applications of the heavy pnictogens nanosheets; however, the toxicological behaviour of these nanosheets has yet to be established. Herein, the cytotoxicity study of pnictogen nanosheets (As, Sb, and Bi) was conducted over 24 h of incubation with various concentrations of test materials and adenocarcinoma human lung epithelial A549 cells. After the treatment period, the remaining cell viabilities were obtained through absorbance measurements with WST-8 and MTT assays. These findings demonstrate that the toxicity of pnictogen nanosheets decreases down Group 15, whereby arsenic nanosheets are considered to be the most toxic, whereas bismuth nanosheets induce low cytotoxicity. The findings of this study constitute an important initial step towards enhancing our understanding of the toxicological effects of pnictogen nanosheets in light of their prospective commercial applications.     

Photo-recycling the Sacrificial Electron Donor: Towards Sustainable Hydrogen Evolution in a Biphasic System

H₂ may be evolved biphasically using a polarised liquid|liquid interface, acting as a “proton pump”, in combination with organic soluble metallocenes as electron donors. Sustainable H₂ production requires methodologies to recycle the oxidised donor. Herein, the photo-recycling of decamethylferrocenium cations (DcMFc⁺) using aqueous core-shell semiconductor CdSe@CdS nanoparticles is presented. Negative polarisation of the liquid|liquid interface is required to extract DcMFc⁺ to the aqueous phase. This facilitates the efficient capture of electrons by DcMFc⁺ on the surface of the photo-excited CdSe@CdS nanoparticles, with hydrophobic DcMFc subsequently partitioning back to the organic phase and resetting the system. TiO₂ (P25) and CdSe semiconductor nanoparticles failed to recycle DcMFc⁺ due to their lower conduction band energy levels. During photo-recycling, CdS (on CdSe) may be self-oxidised and photo-corrode, instead of water acting as the hole scavenger.     

Effect of concentration and particle size on nonlinearity of Au nano-fluid prepared by γ (Co) radiation

Nonlinear properties of Au nano-fluid prepared by γ-radiation method at different concentrations were investigated. Measurements of nonlinear refractive index and nonlinear absorption coefficient were carried out using a single beam Z-scan technique. A green CW laser beam operated at 532 nm was used as excitation source. The Au nano-fluid shows a good third order nonlinear response. The sign of the nonlinear refractive index is found to be negative and the magnitude is in the order of 10⁻⁷ cm²/W. This nonlinear effect increases as the concentration increases from 3.119 × 10⁻⁴ to 2.354 × 10⁻³ M which correspond to particle sizes of 4.0-30.5 nm, respectively. A good linear relationship was obtained between nonlinear refractive index and concentration. However the relationship between nonlinear refractive index and particle size was nonlinear behavior.     

Operational Matrix of Fractional Integration Based on the Shifted Second Kind Chebyshev Polynomials for Solving Fractional Differential Equations

This paper is devoted to studying a computational method for solving multi-term differential equations based on new operational matrix of shifted second kind Chebyshev polynomials. The properties of the operational matrix of fractional integration are exploited to reduce the main problem to an algebraic equation. We present an upper bound for the error in our estimation that leads to achieve the convergence rate of O(M ^−κ). Numerical experiments are reported to demonstrate the applicability and efficiency of the proposed method.

     

Effect of phenolic compounds and quinones on radiation-induced oxidation processes of hexane and ethanol

The radiation-chemical yields were determined for the products of γ-radiation induced oxidation of hexane and ethanol in the presence of natural and synthetic phenolic compounds and quinones. It was found that the commercial antioxidants ionol and bisphenol 2246 more effectively inhibit the hexane oxidation process while α-tocopherol and quinones are superior to other test compounds in the suppression of ethanol oxidation. The results indicate that the antioxidant properties of phenolic compounds and quinones depend not only on their structure but also on the nature of the oxidation substrate. The cause of this phenomenon is discussed.