Gas-phase on-line generation and infrared spectroscopic investigations of polyphosphazenes, (NPX2)3 where X=F, Cl and Br

Gas-phase infrared spectra of polyphosphazenes (phosphonitrilic halides trimer), (NPX2)3 where X=F, Cl and Br have been recorded. The molecules were generated for the first time by an on-line process using solid (NPCl2)3 as a precursor passed over heated sodium fluoride and potassium bromide at about 550 and 700 degrees C for (NPF2)3 and (NPBr2)3 production, respectively. The products were characterized by the infrared spectra of their vapors. The low-resolution gas-phase Fourier transform infrared spectra reported for the first time show strong bands centered at 1295, 1215 and 1200 cm-1, assigned to nu7(E'), in plane PN stretching mode of (NPX2)3, where X=F, Cl and Br, respectively.     

Renewable-surface sol-gel derived carbon ceramic electrode fabricated by [Ru(bpy)(tpy)Cl]PF6 and its application as an amperometric sensor for sulfide and sulfur oxoanions

A highly sensitive and fast responding sensor for the determination of thiosulfate, sulfite, sulfide and dithionite is described. It consists of a chemically modified carbon ceramic composite electrode (CCE) containing [Ru(bpy)(tpy)Cl]PF6 complex that was constructed by the sol-gel technique. A reversible redox couple of Ru(II)/Ru(III) was observed as a solute in acetonitrile solution and as a component of carbon based conducting composite electrode. Electrochemical behavior and stability of modified CCE were investigated by cyclic voltametry, the apparent electron transfer rate constant (kappa(S)) and transfer coefficient (a) were determined by cyclic voltametry which were about 28 s(-1) and 0.43 respectively. Electrocatalytic oxidation of S(2-), SO3(2-), S2O4(2-) and S2O3(2-) were effective at the modified electrode at significantly reduced overpotentials and in the pH range 1-11. Optimum pH values for amperometric detection of thiosulfate, dithionite, sulfide and sulfite are 7, 9, 2 and 2. Under the optimized conditions the calibration curves are linear in the concentration ranges 1-500, 3-80, 2-90 and 1-100 microM for S2O3(2-), SO3(2-), S2- and S2O4(2-) determination. The detection limit (signal to noise is 3) and sensitivity are 0.5 and 12, 2.8 and 6, 1.6 and 8, and 0.65 microM and 80 nA microM(-1) for thiosulfate, sulfite, sulfide and dithionite detection. The modified carbon ceramic electrode doped with Ru-complex shows good reproducibility, a short response time (t < 2 s), remarkable long term stability (> 6 month) and especially good surface renewability by simple mechanical polishing (RSD for eight successive polishing is 2%). The advantages of this sulfur compound amperometric detector based on ruthenium doped CCE are high sensitivity, inherent stability at a broader pH range, excellent catalytic activity, less expense and simplicity of preparation in comparison with recently published papers. This sensor can be used as a chromatographic detector for analysis of sulfur derivatives.     

Synthesis and characterization of platinum(II) and (IV) complexes containing hexamethyleneimine ligand: crystal structure of [Pt(hexamethyleneimine)2(cyclobutanedicarboxylato)]·H2O

A series of new platinum(II) and platinum(IV) complexes of the type [Pt^II(HMI)₂X] (where HMI=hexamethyleneimine, X=dichloro, sulfato, 1,1-cyclobutanedicarboxylato [CBDCA], oxalato, methylmalonato, or tatronato) and [Pt^IV(HMI)₂Y₂Cl₂] (where Y=hydroxo, acetato, or chloro) were synthesized and characterized by infrared (IR) spectroscopy, ¹³C and ¹⁹⁵Pt nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. Among the complexes synthesized, [Pt^II(hexamethyleneimine)₂(1,1-cyclobutanedicarboxylato)]·H₂O was examined by single-crystal X-ray diffraction. The slightly distorted square planar coordination environment of the platinum metal includes the amino group of the hexamethyleneimine (HMI) molecule and the oxygen atoms of the carboxylato ligand. The cyclobutanedicarboxylic acid (CBDCA) molecule adopts six-member chelating rings with platinum. Hydrogen bonding plays an important part in holding the crystal lattice together.     

Oxidations with alkaline permanganate using monovalent thallium for the back-titration: Determination of iodate,iodide and ferrocyanide

Iodate, iodide, iodine and ferrocyanide can be estimated by oxidation with KmnO₄ in alkaline media; the excess is back-titrated with TI⁷. I^- and I₂ are oxidized to IO₄^- in the presence of Ba⁺² ions but only to IO₃^- in absence of such ions. The direct titration of IO₃^-, I^- with KmnO₄ proved valueless.Ferrocyanide is oxidized by KmnO₄ in alkaline solutions and MnO₂ is formed. In the presence of telluric acid and 0.025–0.1 N NaOH satisfactory results are obtained. Reduction of MnO₄^- with ferrocyanide gives MnO₄^-2 and the results are variable, depending on the rate of adding the ferrocyanide.     

Complexation of palladium cyanide with imidazolidine-2-thione and its derivatives

Summary Pd(CN)₂ reacts with imidazolidine-2-thione (Imt), 1,3-diazinane-2-thione(Diaz), 1,3-diazipnane-2-thione (Diap) and their derivatives to yield complexes of stoichiometry [PdL₂(CN)₂] or [PdL(CN)₂] (L = Imt, Diaz or Diap and L = Imt having N-Me, Et or Pr substituents), which were characterized by elemental analysis, i.r., ¹H and ¹³C n.m.r. spectroscopy. Both mono- and bis ligand complexes are thought to be square planar with the monoligand binding to metal via sulphur (bridging) and the bis ligand via the monodentate thione group. The ¹³C enriched Pd(¹³CN)₂ complex was prepared and the ¹³C n.m.r. recorded. The C-2 resonance of ¹³C n.m.r. of Imt, Diaz or Diap complexes of the copper(I), silver(I), gold(I) and palladium(II) were compared.     

Reaction of Pyrimidinonethione Derivatives: Synthesis of N‐Methyl‐2‐Hydrizinopyrimidine‐4‐One,Thiazolo[3,4‐b] N‐Methylpyrimidinone; 2‐(1‐Pyrazolonyl) N‐Methylpyrimidine‐4‐one and 2‐Hydrazino‐N‐Methyl Pyrimidine‐4‐One Derivatives

6‐Aryl‐5‐cyano‐4‐pyrimidinone‐2‐thion derivatives 1a‐c reacted with methyl iodide (1:2) to give the corresponding 2‐S,N‐dimethyl pyrimidine‐4‐one derivatives 2a‐c . Compounds 2a‐c were in turn, reacted with hydrazine hydrate to give the sulfur free reaction products 3a‐c . These reaction products were taken as the starting materials for the synthesis of several new heterocyclic derivatives. Reaction of 3a‐c with acetic anhydride and formic acid gave pyrimido triazines 4a‐c and 7a‐c , respectively. Their reactions with active methylene containing reagents gave the corresponding 2‐(1‐pyrazonyl)‐N‐methyl pyrimidine derivatives 9a‐c and 10a‐c , respectively. Their reactions with aromatic aldehydes afforded the corresponding 2‐hydrazono pyrimidine derivatives 11a‐c . The structure of these reactions products were established based on both elemental analysis and spectral data studies.     

Lignocellulosic biomass for bioethanol: Recent advances,technology trends,and barriers to industrial development

1. Download : Download high-res image (214KB)
2. Download : Download full-size image

     

Triosmium clusters derived from the reactions of thioureas with dodecacarbonyltriosmium: Crystal structures of [Os3(CO)11{η 1-SC(NMe2)2}], [Os3(CO)9(μ-OH)(μ-OMeOCO){η 1-SC(NMe2)2}] and [(μ-H)Os3(CO)9{μ 3-NHC(S)NH2}]

The reaction of [Os₃(CO)₁₂] with tetramethylthiourea in the presence of a methanolic solution of Me₃NO·2H₂O at 60° yields the compounds [Os₃(CO)₁₁{η ¹-SC(NMe₂)₂}] (1) in 56% yield and [Os₃(CO)₉(μ-OH)(μ-MeOCO){η ¹-SC(NMe₂)₂}] (2) in 10% yield in which the tetramethylthiourea ligand is coordinatedvia the sulfur atom at an equatorial position. Compound2 is a 50 e^? cluster with two metal-metal bonds and the hydroxy and methoxycarbonyl ligands bridging the open metal-metal edge. In contrast, the analogous reaction of [Os₃(CO)₁₂] with thiourea gives the compounts [(μ-H)Os₃(CO)₁₀{μ-NHC(S)NH₂}] (3) in 8% yield and [(μ-H)Os₃(CO)₉{₃-NHC(S)NH₂}] (4) in 30% yield. In3, the thioureato ligand bridges two osmium atomsvia the sulfur atom, whereas in4 in addition to the sulfur bridge, one of the nitrogen atoms of thioureato moiety bonds to the remaining osmium atom. The decacarbonyl compounds 3 can also be obtained in 50% yield from the reaction of [Os₃(CO)₁₀(MeCN)₂] with thiourea at ambient temperature. Compound3 converts to4 (65%) photochemically. Compound1 reacts with PPh₃ and acetonitrile at ambient temperature to give the simple substitution products [Os₃(CO)₁₁(PPh₃)] and [Os₃(CO)₁₁(MeCN)], respectively, while with pyridine, the oxidative addition product [(μ-H)Os₃(CO)₁₀(μ-NC₅H₄] is formed at 80°C. All the new compounds are characterized by IR,¹-H-NMR and elemental analysis together with the X-ray crystal structures of1,2 and4. Compound1 crystallizes in the triclinic space group P $P\bar 1$ with unit cell parametersa = 8.626(3) Å,b = 11.639(3) Å,c = 12.568(3_ Å,α = 84.67(2)°,β = 75.36(2)°,γ = 79.49(3)°,V = 1199(1) ų, andZ = 2. Least-squares refinement of 4585 reflections gave a final agreement factor ofR = 0.0766 (R _w = 0.0823). Compound2 crystallizes in the monoclinic space group P2_1/n with unit cell parametersa = 9.149(5) Å,b = 17.483(5) Å,c = 15.094(4) Å,β = 91.75(2)°,V = 2413(2) ų, andZ = 4. Least-squares refinement of 3632 reflections gave a final agreement factor ofR = 0.0603 (R _w = 0.0802). Compound4 crystallizes in the monoclinic space group C2/c with unit cell parametersa = 13.915(7) Å,b = 14.718(6) Å,c = 17.109(6) Å,β = 100.44(3)°,V = 3446(5) ų, andZ = 8. Least-squares refinement of 2910 reflections gave a final agreement factor ofR = 0.0763 (R _w = 0.0863).     

A model of energy transfer to noble gas atoms due to forced resonance within a continuum of plasmon excitation by intense laser pulses

We have developed and applied a model of energy transfer to noble gas atoms due to a resonance mechanism within a continuum of plasmon oscillation induced by intense laser pulses. The model is based on a generalization to 3D of the 1D many-body RPA method of Tomonaga. Total cross sections for laser energy absorption, the saturation intensities for ionization, mean energy transfer and degree of ionization of several noble gases, Xe, Kr, Ar, Ne are obtained for λ = 193 nm and λ = 1064 nm for a short Gaussian laser pulse. Probability distribution of absorption of a given number of photons in Xe is also obtained for λ = 193 nm andI ₀ = 10¹⁴ W/cm². The results are consistent with the rapid energy transfer necessary for multiple ionization at these frequencies.     

4‐[3‐(3,4‐Di­methoxy­phenyl)­prop‐2‐enoyl]­phenyl methacryl­ate and 4‐[3‐(2‐bromo­phenyl)­prop‐2‐enoyl]­phenyl methacryl­ate

Chalcones (α,β‐unsaturated ketones) are effective antitumour agents. It has been proved that having halogen or methoxy groups substituted in various positions of the phenyl ring enhances the activity of chalcones many times. The title compounds, C₂₁H₂₀O₅ and C₁₉H₁₅BrO₃, respectively, were chosen for crystallographic study in order to determine their structures and conformations. In both compounds, the keto group is in the s‐cis conformation and is almost planar. There are weak intramolecular interactions in both structures.