Improving the impact property and heat‐resistance of PLA/PC blends through coupling molecular chains at the interface

The influences of both the molecular structure and the melt viscosity differences between Poly(lactic acid) (PLA) and polycarbonate (PC) on the interpenetration of molecular chains at the interface were investigated by comparing the dynamic mechanical properties and morphologies of the as‐prepared PLA/PC solution‐casting blends with those of their corresponding annealed (180°C, 8 h) samples or PLA/PC melt blends. Additionally, two chain extenders containing epoxy groups (ADR and TGDDM) were used to improve the interfacial strength. Subsequently, the interpenetration of PLA and PC molecular chains at the interface was also surveyed. Finally, the effects of the morphology formed by after adding ADR or TGDDM on the impact property, and heat resistance were discussed. The results showed that there was no interpenetration of molecular chains at the interface in PLA/PC melt blends because of the serious hindrance of the molecular structure and the melt viscosity differences. Although the interfacial strength achieved significant increase after adding ADR or TGDDM, the increase of the interfacial strength should be caused by the connection of ADR or TGDDM molecules with PLA and PC molecules at the interface through chemical bonds rather than the entanglements of PLA and PC molecular chains because of no interpenetration of PLA and PC molecular chains at the interface. Thus, the morphology formed after adding ADR or TGDDM is still the type of complete phase separation, which may be the most suitable morphology for achieving high impact and heat resistance PLA/PC blends because these two properties strongly depend on the crystallinity of PLA phase. Copyright © 2015 John Wiley & Sons, Ltd.     

Light‐Directing Omnidirectional Circularly Polarized Reflection from Liquid‐Crystal Droplets

Constructing and tuning self‐organized three‐dimensional (3D) superstructures with tailored functionality is crucial in the nanofabrication of smart molecular devices. Herein we fabricate a self‐organized, phototunable 3D photonic superstructure from monodisperse droplets of one‐dimensional cholesteric liquid crystal (CLC) containing a photosensitive chiral molecular switch with high helical twisting power. The droplets are obtained by a glass capillary microfluidic technique by dispersing into PVA solution that facilitates planar anchoring of the liquid‐crystal molecules at the droplet surface, as confirmed by the observation of normal incidence selective circular polarized reflection in all directions from the core of individual droplet. Photoirradiation of the droplets furnishes dynamic reflection colors without thermal relaxation, whose wavelength can be tuned reversibly by variation of the irradiation time. The results provided clear evidence on the phototunable reflection in all directions.     

Redox‐Neutral α‐Allylation of Amines by Combining Palladium Catalysis and Visible‐Light Photoredox Catalysis

An unprecedented α‐allylation of amines was achieved by combining palladium catalysis and visible‐light photoredox catalysis. In this dual catalysis process, the catalytic generation of allyl radical from the corresponding π‐allylpalladium intermediate was achieved without additional metal reducing reagents (redox‐neutral). Various allylation products of amines were obtained in high yields through radical cross‐coupling under mild reaction conditions. Moreover, the transformation was applied to the formal synthesis of 8‐oxoprotoberberine derivatives which show potential anticancer properties.     

Cytotoxicity of benzophenanthridine alkaloids from the roots of Zanthoxylum nitidum (Roxb.) DC. var. fastuosum How ex Huang

This work aimed to investigate benzophenanthridine from the roots of Zanthoxylum nitidum (Roxb.) DC. var. fastuosum How ex Huang for the first time. Thirteen benzophenanthridines were isolated, and our results of the cytotoxic activities indicated that compound 6 exhibited the best potency against A549, Hela, SMMC-7721 and EJ, with the IC₅₀ values of 27.50, 37.50, 16.95 and 60.42 μM, respectively. Compounds 7 and 11 also showed strong cytotoxicity when tested against the four human cancer cell lines (A549, Hela, SMMC-7721 and EJ), while only compounds 12 and 13 displayed cytotoxicity in inhibiting BALL-1 proliferation among all the compounds. These results suggested that benzophenanthridines may become a valid alternative of potential basis for new anti-proliferative agents.     

Chemical composition and antibacterial activity of the essential oil from Agathis dammara (Lamb.) Rich fresh leaves

The essential oil of fresh leaves from Agathis dammara (Lamb.) Rich was extracted using hydro-distillation, and GC-FID and GC–MS were used to analyse the essential oil. Nineteen compounds were identified, among which the major components were limonene (36.81%), β-bisabolene (33.43%) and β-myrcene (25.48%). In the antibacterial test, disc diffusion method and micro-well dilution assay proved that the essential oil had significant antibacterial activities. The inhibition zones against Staphylococcus aureus and Pseudomonas aeruginosa were 23.7 and 23 mm, respectively, which demonstrated that the inhibition effects were greater than positive control (10 μg/disc streptomycin). And the lowest MIC value of the essential oil was found against S. aureus (1.25 mg/mL) and Bacillus subtilis (1.25 mg/mL). This is the first report on the antibacterial activities of A. dammara essential oil.     

Enrichment of adenosine using thermally responsive chromatographic materials under friendly pH conditions

A thermally responsive boronate affinity chromatographic material, which showed thermal sensitivity, had been successfully applied for the enrichment and separation of cis‐diol‐containing compounds, and the capture and release process could be facilitated by adjusting the temperature. However, in this system, the pH of the mobile phase must be higher than 9.8, and alkaline media can lead to the degradation of labile compounds; the use of silica beads also limits its use. In this study, thermally responsive boronate affinity chromatographic material, namely poly(N‐isopropylacrylamide‐co‐N‐acryloyl‐3‐aminophenylboronic acid) grafted silica, was successfully prepared by atom transfer radical polymerization. Its structure was confirmed by IR spectroscopy and the graft ratio was 20.8%, determined by thermogravimetric analysis. Furthermore, the capture/release of adenosine, a cis‐diol, was performed from pH 5.0–9.0 and 10–50°C. The elution of adenosine was remarkably retarded at decreased temperatures and adenosine could be captured completely at 10°C at pH values of 5.0–9.0. The enrichment of adenosine could be achieved by simply changing the temperature from 10 to 50°C. Therefore, this material not only improved the stability of the silica, but was also suitable for the capture of oxidation‐sensitive biological analytes. Moreover, it could be used for the enrichment of cis‐diol‐containing compounds in LC with MS.     

Rapid and ultrasensitive colorimetric detection of mercury(II) by chemically initiated aggregation of gold nanoparticles

The article describes a method for rapid and visual determination of Hg(II) ion using unmodified gold nanoparticles (Au-NPs). It involves the addition of Au-NPs to a solution containing Hg(II) ions which, however, does not induce a color change. Next, a solution of lysine is added which induces the aggregation of the Au-NPs and causes the color of the solution to change from wine-red to purple. The whole on-site detection process can be executed in less than 15 min. Other amines (ethylenediamine, arginine, and melamine) were also investigated with respect to their capability to induce aggregation. Notably, only amines containing more than one amino group were found to be effective, but a 0.4 μM and pH 8 solution of lysine was found to give the best results. The detection limits for Hg (II) are 8.4 pM (for instrumental read-out) and 10 pM (for visual read-out). To the best of our knowledge, this LOD is better than those reported for any other existing rapid screening methods. The assay is not interfered by the presence of other common metal ions even if present in 1000-fold excess over Hg(II) concentration. It was successfully applied to the determination of Hg(II) in spiked tap water samples. We perceive that this method provides an excellent tool for rapid and ultrasensitive on-site determination of Hg(II) ions at low cost, with relative ease and minimal operation.

Rapid and ultrasensitive detection of mercury ions using gold nanoparticle based label-free colorimetric method with excellent sensitivity, easy operation and low cost.