Pulsed and continuous wave acrylic acid radio frequency plasma deposits: plasma and surface chemistry

Plasma polymers have been formed from acrylic acid using a pulsed power source. An on-pulse duration of 100 micros was used with a range of discharge off-times between 0 (continuous wave) and 20,000 micros. X-ray photoelectron spectroscopy (XPS) has been used in combination with trifluoroethanol (TFE) derivatization to quantify the surface concentration of the carboxylic acid functionality in the deposit. Retention of this functionality from the monomer varied from 2% to 65%. When input power was expressed as the time-averaged energy per monomer molecule, E(mean), the deposit chemistry achieved could be described using a single relationship for all deposition conditions. Deposition rates were monitored using a quartz crystal microbalance, which revealed a range from 20 to 200 microg m(-2) s(-1), and these fell as COOH functional retention increased. The flow rate was found to be the major determinant of the deposition rate, rather than being uniquely defined by E(mean), connected to the rate at which fresh monomer enters the system in the monomer deficient regime. The neutral species were collected in a time-averaged manner. As the energy delivered per molecule in the system (E(mean)) decreased, the amount of intact monomer increased, with the average neutral mass approaching 72 amu as E(mean) tends to zero. No neutral oligomeric species were detected. Langmuir probes have been used to determine the temporal evolution of the density and temperature of the electrons in the plasma and the plasma potential adjacent to the depositing film. It has been found that even 500 micros into the afterglow period that ionic densities are still significant, 5-10% of the on-time density, and that ion accelerating sheath potentials fall from 40 V in the on-time to a few volts in the off-time. We have made the first detailed, time- and energy-resolved mass spectrometry measurements in depositing acrylic acid plasma. These have allowed us to identify and quantify the positive ion species in the acrylic acid plasma during both the on- and the off- periods. The relative intensities of oligomeric species of the type [nM + H]+ as large as n = 3 were observed to increase in the off-time suggesting vapor phase polymerization after power input to the plasma was ceased. The energy distribution functions of these ions demonstrated that they were produced in the plasma in both the on- and the off-times. This remarkable observation contradicts the assumptions usually made when speculating on pulsed plasma that ions have very short lifetimes, although it is anticipated that radicals still have significantly longer lifetimes, estimated from calculation to be in excess of 1 ms. The increase in average positive ion mass during the off-period can be related to the lower mobility of the heavier components, reducing their relative loss to surfaces, and the polymer chain growth in the gas phase due to the ion-neutral collisions. The implications of these observations are discussed in light of polymerization mechanisms proposed from continuous acrylic acid and millisecond pulsing plasmas.     

Surface-controlled spatially heterogeneous physical properties of a supramolecular gel with homogeneous chemical composition

Controlling supramolecular self-assembly across multiple length scales to prepare gels with localised properties is challenging. Most strategies concentrate on fabricating gels with heterogeneous components, where localised properties are generated by the stimuli-responsive component. Here, as an alternative approach, we use a spiropyran-modified surface that can be patterned with light. We show that light-induced differences in surface chemistry can direct the bulk assembly of a low molecular weight gelator, 2-NapAV, meaning that mechanical gel properties can be controlled by the surface on which the gel is grown. Using grazing incidence X-ray diffraction and grazing incidence small angle X-ray scattering, we demonstrate that the origin of the different gel properties relates to differences in the architectures of the gels. This provides a new method to prepare a single domain (i.e., chemically homogeneous) hydrogel with locally controlled (i.e., mechanically heterogeneous) properties.

A mechanical pattern is created in a hydrogel film by pre-patterning the underlying surface chemistry. This allows spatial variation of the viscous component of the gel, controlling dissipative forces in the gel film without altering gel chemistry.     

Finite element methods for problems with solid-liquid-solid phase transitions and free melt surface

Modeling and computation of a process with solid-liquid-solid phase transitions and a free capillary surface is discussed. The main components of the model are heat conduction, a free melt surface, a moving phase boundary, and its coupling with the Navier-Stokes equations. We present two different approaches for handling the phase transitions by applying in a FE method, namely an energy conservation based approach, and a sharp interface approach with moving mesh. By combining both methods, we benefit from the advantages of the respective approach. The methods are applied to a problem where material is accumulated by melting the tip of thin steel wires using laser heating. (© 2012 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Conductivity of solvated electrons in hexane investigated with terahertz time-domain spectroscopy

We present investigations of the transient photoconductivity and recombination dynamics of quasifree electrons in liquid n-hexane and cyclohexane performed using terahertz time-domain spectroscopy (THz-TDS). Quasifree electrons are generated by two-photon photoionization of the liquid using a femtosecond ultraviolet pulse, and the resulting changes in the complex conductivity are probed by a THz electromagnetic pulse at a variable delay. The detection of time-domain wave forms of the THz electric field permits the direct determination of both the real and the imaginary part of the conductivity of the electrons over a wide frequency range. The change in conductivity can be described by the Drude model, thus yielding the quasifree electron density and scattering time. The electron density is found to decay on a time scale of a few hundred picoseconds, which becomes shorter with increasing excitation density. The dynamics can be described by a model that assumes nongeminate recombination between electrons and positive ions. In addition, a strong dependence of the quasifree electron density on temperature is observed, in agreement with a two-state model in which the electron may exist in either a quasifree or a bound state.     

Quantifiable correlation of ToF-SIMS and XPS data from polymer surfaces with controlled amino acid and peptide content

Peptide-coated surfaces are widely employed in biomaterial design, but quantifiable correlation between surface composition and biological response is challenging due to, for example, instrumental limitations, a lack of suitable model surfaces or limitations in quantitatively correlating data from different surface analytical techniques. Here, we first establish a reference material that allows control over amino acid content. Reversible addition-fragmentation chain-transfer (RAFT) polymerisation is used to prepare a copolymer containing alkyne and furan units with well-defined chain length and composition. Huisgen Cu(I)-catalysed azide-alkyne cycloaddition reaction is used to attach the model azido-polyethyleneglycol-amide-modified pentafluoro-l -phenylalanine to the polymer. Different compositional ratios of the polymer provide a surface with varying amino acid content that is analysed by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Nitrogen-related signals are compared with fluorine signals from both techniques. Fluorine and nitrogen signals from both techniques are found to be related to the copolymer compositions, but the homopolymer data deviate from this trend. The approach is then translated to a heparin-binding peptide that supports cell adhesion. Human embryonic stem cells cultured on copolymer surfaces presenting different amounts of heparin-binding peptide show strong cell growth while maintaining pluripotency after 72 h of culture. The early cell adhesion at 24 h can be correlated to the logarithm of the normalised CH₄N⁺ ion intensity from ToF-SIMS data, which is established as a suitable and generalisable marker ion for amino acids and peptides. This work contributes to the ability to use ToF-SIMS in a more quantitative manner for the analysis of amino acid and peptide surfaces.     

Influence of concentration and temperature on the dynamics of water in the hydrophobic hydration shell of tetramethylurea

We study the influence of the amphipilic compound tetramethylurea (TMU) on the dynamical properties of water, using dielectric relaxation spectroscopy in the regime between 0.2 GHz and 2 THz. This technique is capable of resolving different water species, their relative fractions, and their corresponding reorientation dynamics. We find that the reorientation dynamics of water molecules in the hydration shell of the hydrophobic groups of TMU is between 3 (at low concentrations) and 10 (at higher concentrations) times slower than the dynamics of bulk water. The data indicate that the effect of hydrophobic groups on water is strong but relatively short-ranged. With increasing temperature, the fraction of water contained in the hydrophobic hydration shell decreases, which implies that the overall effect of hydrophobic groups on water becomes smaller.