Sediment Assessment of the Pchelina Reservoir,Bulgaria

The temporal dynamics of anthropogenic impacts on the Pchelina Reservoir is assessed based on chemical element analysis of three sediment cores at a depth of about 100–130 cm below the surface water. The ¹³⁷Cs activity is measured to identify the layers corresponding to the 1986 Chernobyl accident. The obtained dating of sediment cores gives an average sedimentation rate of 0.44 cm/year in the Pchelina Reservoir. The elements’ depth profiles (Ti, Mn, Fe, Zn, Cr, Ni, Cu, Mo, Sn, Sb, Pb, Co, Cd, Ce, Tl, Bi, Gd, La, Th and U_nat) outline the Struma River as the main anthropogenic source for Pchelina Reservoir sediments. The principal component analysis reveals two groups of chemical elements connected with the anthropogenic impacts. The first group of chemical elements (Mn, Fe, Cr, Ni, Cu, Mo, Sn, Sb and Co) has increasing time trends in the Struma sediment core and no trend or decreasing ones at the Pchelina sampling core. The behavior of these elements is determined by the change of the profile of the industry in the Pernik town during the 1990s. The second group of elements (Zn, Pb, Cd, Bi and U_nat) has increasing time trends in Struma and Pchelina sediment cores. The increased concentrations of these elements during the whole investigated period have led to moderate enrichments for Pb and U_nat, and significant enrichments for Zn and Cd at the Pchelina sampling site. The moderately contaminated, according to the geoaccumulation indexes, Pchelina Reservoir surface sediment samples have low ecotoxicity.     

Trace determination of arsenic species by capillary electrophoresis with direct UV detection using sensitivity enhancement by counter- or co-electroosmotic flow stacking and a high-sensitivity cell

Stacking techniques used independently and also with a high-sensitivity cell (HSC) were employed to optimise sensitivity and detection limits in the direct photometric detection of the following eight arsenic species by capillary zone electrophoresis (CZE): arsenite, arsenate, monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), 4-hydroxy-3-nitrophenylarsonic acid (Roxarsone), p-aminophenylarsonic acid (p-ASA), 4-nitrophenylarsonic acid (4-NPAA), and phenylarsonic acid (PAA) (target analytes). The stacking mechanisms, optimised stacking and separation conditions, and concentration sensitivity enhancement factors were discussed and compared for (i) normal stacking mode (NSM, sometimes also referred to as field-amplified stacking) in an uncoated fused-silica capillary in the counter-electroosmotic flow (EOF) mode, (ii) large-volume sample stacking (LVSS) with polarity switching, and (iii) the less often applied stacking method of co-EOF NSM stacking with EOF reversal using a poly(diallydimethylammonium chloride) (PDDAC)-coated capillary. The optimal injection volumes were 7.4, 60 and 17.2% of the total capillary volume, for the above three methods, respectively. LVSS with polarity switching gave the lowest limit of detection (LOD). The use of the HSC further reduced the LOD of each target analytes by a factor of 5-8 times. By combining LVSS and HSC, LODs of the target analytes could be reduced by a factor of 218-311, to 5.61, 9.15, 11.1, and 17.1 microg/L for As(III), DMA, MMA, and As(V), respectively. The method was demonstrated to be applicable to the determination of the target analytes in tap water and lake water, with recoveries in the range of 89.4-103.3%.     

Capillary electrophoretic study of interactions of metal ions with crown ethers,a sulfated beta-cyclodextrin,and zwitterionic buffers present as additives in the background electrolyte

Stability constants of K, Na, Ca, and Ba with 18-crown-6, K, Na, Li with sulfated beta-cyclodextrin and K, Li, Ca, Mg, Sr, and Ba ions with ([2-hydroxy-1,1-bis(hydroxymethyl) ethyl]-amino)-1-propanesulfonic acid (TAPS) were determined by capillary electrophoresis and computed using a general least squares minimizing program CELET. The results for 18-crown-6 agreed well with those evaluated by graphical methods or reported in the literature. Previously unknown stability constants of sulfated beta-cyclodextrins and TAPS determined for alkali and alkaline earth metals show that sulfated beta-cyclodextrin interacts with monovalent metals allowing to manipulate their effective mobility. It interacts stronger with divalent metal cations. TAPS, as zwitterionic buffer widely used in various analytical, biochemical and other applications, forms complexes with alkali and alkaline earth cations, and although the stability constants are rather low, the equilibria should be taken into account when TAPS is used and metal cations are present in solution at the same time.     

Modelling,optimisation and control of selectivity in the separation of aromatic bases by electrokinetic chromatography using a neutral cyclodextrin as a pseudostationary phase

A simple mathematical model describing the separation of a series of aromatic bases by electrokinetic chromatography using beta-cyclodextrin (beta-CD) as a pseudostationary phase is described. The model takes into account changes in electrolyte pH and the different formation constants between the neutral and charged forms of the analytes with the CD. Constants in the model were obtained within the two-dimensional experimental space defined by pH and [beta-CD] with nonlinear regression using only five experimental points. These constants agreed with expected trends in analyte-CD interactions and predicted much higher formation constants for the neutral analyte-CD complex than for the charged analyte-CD complex. Correlation between predicted and observed mobilities using additional 20 points within the experimental space gave r(2) = 0.995. Optimisation of the pH and [beta-CD] was performed using both the normalised resolution product and minimum resolution product criteria and provided two optimum separations which exhibited different selectivities. Differences between predicted and observed migration times at these optima were less than 2.5 and 5% for the normalised resolution product and the minimum resolution criteria, respectively. In both cases the correct migration order was predicted. The model was also applied successfully to the optimisation of conditions for the separation of a specific mixture of analytes or for conditions under which particular analytes migrated in a desired order.     

Chemiluminescence determination of antibacterial drug trimethoprim by automated sequential injection technique with permanganate and hexametaphosphate as reagents

Antibacterial drug trimethoprim [2,4-diamino-5-(3,4,5-trimethoxybenzyl)-pyrimidine] (I) was determined in pharmaceutical formulations by using a lab-made PC-controlled SIA analyser linked to conventional HPLC fluorimetric detector equipped with a chemiluminescence module. The chemical principle is the oxidation of I by KMnO(4) in acid medium; the reaction is accompanied by the emission of chemiluminescence, which is enhanced in the presence of hexametaphosphate (HMP). The optimum sequence and the flow parameters and concentrations and volumes of reagents aspirated optimised by a computer-aided simplex method were, 100 mul of 5 mM HMP, 40 mul of a test solution of I, 2 mul of 0.5 M H(2)SO(4) and 20 mul of 1 mM KMnO(4); the luminescing zone was pushed into the detector at a flow rate of 49 mul s(-1). The calibration graph relating the intensity of luminescence to concentration of I was parabolic (r=0.9994) in the range 0.5-100 mug ml(-1) of I with rectilinear part (r=0.9999) in the range 20-100 mug ml(-1) of I; the limit of detection was 0.1 mug ml(-1) of I. The method was used for the assay of Triprim(R) tablets (with nominal content 100 or 200 mg of I) for the active substance as well as for content uniformity tests; the R.S.D. values did not exceed 1% (n=5). The SIA results did not show statistical difference from those obtained by pharmacopoeial acidimetric titration in non-aqueous medium; the excipients such as microcrystalline cellulose, maze starch, povidone, talc, magnesium stearate and gelatin did not interfere.     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

A modified HPLC method for the determination of aspartic acid racemization in collagen from human dentin and its comparison with GC

The D/L ratio of aspartic acid enantiomers in proteins of low turnover is generally accepted as a reliable procedure for age determination. In our study, twelve samples of eyetooth dentin were analyzed for age determination. The pure insoluble collagen isolated from eyetooth dentin was obtained by an EDTA demineralization process. Free amino acids obtained after collagen hydrolysis were converted into o-phthaldialdehyde-N-acetyl-L-cysteine (OPA-NAC) derivatives for HPLC analysis under modified conditions and into trifluoroacetic acid isopropyl esters for GC analysis, respectively. The modified HPLC procedure used phosphate buffer and acidified sample matrix prior to injection which resulted in suppression of peak tailing of both diastereomers, thus allowing achievement of both good selectivity and good resolution. To ensure the high accuracy of the developed method the other parameters, i.e. specificity, precision, linearity, LOD, and LOQ, were also determined. Nine collagen samples covering the age range of 18 to 84 years were used for the determination of coefficient of racemization (KR) and calculation of parameters for age estimation. The regression equations for the data set analyzed were as follows: KR= 0.0005 x age + 0.0262 (R2 = 0.9639) for HPLC, and KR= 0.0006 x age + 0.0319 (R2 = 0.9374) for GC, respectively.     

Fluorescence properties of some 2-(4-amino-substituted-3-nitrophenyl)-3-hydroxyquinolin-4(1H)-ones

2-(4-Amino-substituted-3-nitrophenyl)-3-hydroxyquinolin-4(1H)-ones have been studied to evaluate their fluorescence properties and possible use as molecular fluorescent probes. The amino group was substituted with various alkyl moieties possessing a suitable terminal functional group (such as hydroxy or amino group) that could serve to bind a 3-hydroxyquinolin-4(1H)-one (3HQ) fluorescence label to a biomolecule. Besides simple hydrocarbon chains, ligands containing ethylenoxy units as optimal spacers were also tested. The structure-fluorescence properties and theoretical applicability of the studied molecules are discussed.     

Syntheses and PE-Spectroscopic Investigations of 2,6- and 3,5-Bridged 1,4-Dimethylidenecyclohexanes

Three 1,4-dimethylidenecyclohexanes, bridged in the 2,6- and 3,5-positions by two ethano ( 4 ), one ethano and one propano ( 5 ), and two propano bridges ( 6 ) have been synthesized. The interaction of the two exocyclic methylidene groups has been investigated by He(I) photoelectron (PE) spectroscopy. It revealed a slightly larger energy difference (0.8 eV) for 4 and 5 as compared to the parent 1,4-dimethylidenecyclohexane ( 7 ) (0.7 eV). The interpretation of the PE spectra was based on the comparison with PE data of related systems and with the results of semiempirical calculations on 4–6 .     

Crystal habit modifications of imatinib mesylate under various precipitation conditions

Abstract  

Crystals of the α-form of imatinib mesylate with various habits (e.g., polyhedral-like and plate-like) were prepared from various organic solvents (e.g., butyl lactate, 4-methyl-2-pentanone, 2-methyl-2-butanol, 2-isopropoxyethanol, propyl ether) by several precipitation methods. The methods provide imatinib mesylate in a non-needle-shaped crystalline α-form. The crystal modification was identified by hot-stage microscopy, scanning electron microscopy, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and X-ray powder diffraction (XRPD). The analyses by DSC, IR, and XRPD indicate that imatinib mesylate crystals with various habits have the same crystal structure. The plate-like habit has been also observed in the system where the organic solvent acts as a precipitant.