Tautomerism of xanthine: The second-order MØller-Plesset study

Four 9H and four 7H tautomers of DNA base xanthine were studied by the ab initio LCAO-MO method at the MP2/6-311G^**//HF/6-31G^** and MP2/6-31G^**//HF/6-31G^** approximations. All calculated structures are minima at the HF/6-31G^** potential energy surface with the dioxo 7H tautomer (A1) being the global minimum. The second most stable tautomer, dioxo-9H (B1) is by 9 kcal/mol less stable. For the A1 B1 transition the calculated MP2 energy gap corresponds to the equilibrium constant of 2 × 10^–7. Therefore, only the major tautomeric form A1 is predicted to be detectable in the gas phase. The 7H and 9H groups of tautomers are discussed separately. Within both groups, the dioxo form (A1-7H, B1-9H) is the most stable one and is succeeded by the 2-dihydroxy (A2, B2) form. However, while the energy difference between A1 and A2 is 10 kcal/mol, the energy difference between B1 a B2 is only 2 kcal/mol. The effect of polar environment was estimated by the SCRF method, using a spherical cavity, at the HF/6-31G^** level. These calculations did not change the gas phase stability order of the tautomers. However, the energy difference between A1 and B1 decreased from 9 kcal/mol at the HF/6-31G^** level to 4 kcal/mol at the SCRF HF/6-31G^** level.     

Modification of nonionic adsorbent with eriochrome blue-black R for selective nickel(II) preconcentration in conventional and flow-injection atomic-absorption spectrometry

Chemical modification of nonionic sorbent Amberlite XAD-2 or anion exchanger Amberlyst A-26 with Eriochrome Blue-Black R (EBBR) produces a chelating resin of satisfactory chemical stability and resistance towards mineral acids. Retention of 10 metal ions has been examined for both resins. EBBR loaded XAD-2 was utilized for nickel(II) preconcentration in atomic-absorption spectrometry. In optimal conditions at a preconcentration time not exceeding 1 hr, nickel(II) can be determined at the 0.1 mug/l. level in flow measurements. Retention of metal ions on chelating resin is a convenient method of preconcentration and elimination of matrix interferences.     

Novel rhenium(III) complexes with 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine: X-ray structures and DFT calculations for [ReCl3(OPPh3)(dppt)] and [ReCl3(PPh3)(dppt)] complexes

The reaction of [ReOCl₃(PPh₃)₂] with 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine (dppt) has been examined and [ReCl₃(OPPh₃)(dppt)] has been obtained. The triphenylphosphine oxide can be easily replaced by PPh₃ in the reaction of [ReCl₃(OPPh₃)(dppt)] with an excess of triphenylphosphine. The [ReCl₃(OPPh₃)(dppt)] and [ReCl₃(PPh₃)(dppt)] complexes have been structurally and spectroscopically characterized. Their molecular orbital diagrams have been calculated with the density functional theory (DFT) method, and their electronic spectra have been discussed on the basis of time-dependent DFT calculations. The compound [ReCl₃(OPPh₃)(dppt)] has been studied additionally by magnetic measurement. The magnetic behavior is characteristic of mononuclear complexes with d⁴ low-spin octahedral Re(III) complexes (³T_1g ground state) and arise because of the large spin–orbit coupling (ζ = 2500 cm⁻¹), which gives diamagnetic ground state.     

Solvatochromic equilibria of cobalt(II) chloride in binary mixtures of dipolar aprotic solvents with water

The visible absorption spectra of CoCl₂ in binary mixtures of acetone, dmf, dma and dmso with H₂O show the existence of configuration equilibria between tetrahedral (T) and octahedral (O) species. Linear correlations between the values of log K (K = [O]/[T]) and the mole fraction of H₂O, _w, have been observed in all the systems under study; their slopes decrease linearly with an increase of the donor number, DN, of the organic component of the mixture. The formation of octahedral species is enthalpy favoured but entropy disfavoured. It was found that both H and S values change linearly with _w and the slopes of these relationships depend clearly on the DN values.     

Synthesis,crystal structure and magnetic properties of a novel manganese(II)-nitronyl nitroxide-azido(μ<Subscript>1,1</Subscript> and μ<Subscript>1,3</Subscript>) one-dimensional complex

A novel one-dimensional manganese(II) complex containing nitronyl nitroxide radical [Mn₂(IM2-py)₂(Ac)₂(μ_1,1-N₃)(μ_1,3-N₃) · EtOH] _n was synthesized and characterized structurally and magnetically. It crystallizes in the monoclinic space group p2₁/n. Each Mn(II) ion is six-coordinated in a distorted octahedral environment. The two N atoms of the nitronyl nitroxide radical and the two O atoms of acetate ligands are in the equatorial plane, whereas the two different azido bridging ligands are in trans axial position. Mn(II) ions are linked by nitrogen atom of μ_1,1-azido and oxygen atoms of two carboxy groups to form a Mn-Mn unit. Mn-Mn units are linked by azido ligands through μ_1,3 bridging style to form a one-dimensional chain. The compound is connected by the coordination bonds, π-π interactions and hydrogen bonds as a three-dimensional structure. Magnetic susceptibility data support that there are stronger antiferromagnetic interactions between the radical and Mn(II) ion, weak antiferromagnetic interactions between the Mn-R units, and very weak antiferromagnetic interactions between the R-Mn-Mn-R units.     

Electrochemical Behavior of Epinephrine at a Penicillamine Self-Assembled Gold Electrode,and its Analytical Application

The fabrication and electrochemical characteristics of a penicillamine (PCA) self-assembled monolayer modified gold electrode were investigated. The self-assembled electrode shows obvious electrocatalytic activity for the oxidation of epinephrine (EP). In phosphate buffer (pH 7.73), a sensitive oxidation peak was observed at 0.190V with the PCA modified Au electrode. The peak current is proportional to the concentration of EP in the range of 2.0×10^–56.0×10^–4molL^–1 and 5.0×10^–6 2.0×10^–4molL^–1 for cyclic voltammetry (CV) and differential pulse voltammetry (DPV) with the detection limits of 1.8×10^–7 and 1.3×10^–7molL^–1, respectively. The possible reaction mechanism is also discussed. The PCA self-assembled monolayer modified gold electrode is highly stable and can be applied to the determination of EP in practical injection samples. Application is simple, rapid and produces accurate results.     

The Role of Intramolecular Hydrogen Bonds vs. Other Weak Interactions on the Conformation of Hyponitrous Acid and Its Mono- and Dithio-Derivatives

High level ab initio and density functional theory calculations have been carried out to investigate the relative stability of the different conformers of hyponitrous acid and its mono- and dithio-derivatives. Geometries and vibrational frequencies were obtained at the B3LYP/6-311+G(d,p) level and final energies through B3LYP/6-311++G(3df,2pd) single point calculations. The reliability of this theoretical scheme has been assessed by comparing these DFT results with those obtained at the G3 level of theory, for some suitable cases. The cis conformers of hyponitrous acid and its mono- and dithio-derivatives are systematically more stable than the trans ones because in the cis conformation a dative interaction between the nitrogen-lone pairs and the σ_NX^* antibonding orbital is significantly favored. Quite interestingly, in general, the conformers presenting an intramolecular hydrogen bond (IHB) are not the global minima of the corresponding potential energy surfaces and only for hyponitrous acid the conformer with a OH ⋅s O IHB is slightly more stable than the cis conformer without IHB. The low stability of the tautomers with IHB is closely related with another weak intramolecular interaction which involves the lone-pairs of the chalcogen atoms and the π_NN^* antibondig orbital, and which is significantly perturbed when the IHB is formed.     

Adsorption of Bovine Serum Albumin onto Polystyrene Latex Particles Bearing Saccharidic Moieties

The adsorption of bovine serum albumin (BSA) onto polystyrene latexes bearing various amounts of sugar moieties has been investigated as a function of pH and ionic strength and the results were compared to those for bare polystyrene latexes having negative surface charges. The functionalized latexes were produced by seeded copolymerization of (0.3 μm) liposaccharidic monomer onto polystyrene particles obtained by soap-free emulsion polymerization of styrene using potassium persulfate as initiator. At first, the electrophoretic mobility behavior of the various latexes was examined as a function of pH: a significant decrease was observed in the case of saccharide-containing latex particles compared to the bare particles. The adsorption of BSA onto these latexes exhibited a reduced amount of adsorbed BSA for those latex particles bearing saccharide groups. This adsorbed amount depends on the yield of saccharidic monomer incorporated onto the surfaces of the latex particles.     

A new affinity-HPLC packing for protein separation: Cibacron blue attached uniform porous poly(HEMA-<Emphasis Type="Italic">co</Emphasis>-EDM) beads

In this study, a new affinity high-performance liquid chromatography (HPLC) stationary phase suitable for protein separation was synthesized. In the first stage of the synthesis, uniform porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(HEMA-co-EDM), beads 6.2 μm in size were obtained. Homogeneous distribution of hydroxyl groups in the bead interior was confirmed by confocal laser scanning microscopy. The plain poly(HEMA-co-EDM) particles gave very low non-specific protein adsorption with albumin. The selected dye ligand Cibacron blue F3G-A (CB F3G-A) was covalently linked onto the beads via hydroxyl groups. In the batch experiments, albumin adsorption up to 60 mg BSA/g particles was obtained with the CB F3G-A carrying poly(HEMA-co-EDM) beads. The affinity-HPLC of selected proteins (albumin and lysozyme) was investigated in a 25 mm×4.0-mm inner diameter column packed with CB F3G-A carrying beads and both proteins were successfully resolved. By a single injection, 200 μg of protein was loaded and quantitatively eluted from the column. The protein recovery increased with increasing flow rate and salt concentration of the elution buffer and decreased with the increasing protein feed concentration. During the albumin elution, theoretical plate numbers up to 30,000 plates/m were achieved by increasing the salt concentration.     

Preparation of light-stable micelles with azo dyes from a nonamphiphilic random block copolymer

Light-stable micelles with azo dyes were prepared by micelle formation of a nonamphiphilic diblock copolymer containing azobenzene and UV absorbent at ca. 1 mol% as the unit ratios. The nonamphiphilic block copolymer consists of two different kinds of random copolymer blocks: poly[4-(phenylazophenoxymethyl)styrene-co-vinylphenol] (P(AS-co-VPh)) and poly[4-(2-hydroxybenzophenoxymethyl)styrene-co-styrene] (P(HBS-co-St)). This random block copolymer, P(AS-co-VPh)-b-P(HBS-co-St) formed the micelles in the presence of 1,4-butanediamine (BDA) through hydrogen bond cross-linking between the VPh units via BDA. The micelles had the azobenzene moieties at the cores and the UV absorbents at the coronas. The micelles showed a small color difference in color fading experiments, in comparison with the unimers and with micelles having no UV absorbent at the coronas. It is significant that the diblock copolymer forms the micelles and has the UV absorbents at the coronas to suppress the color fading. Furthermore, the chain length of ,-diamines had no effect on the hydrodynamic radius of the micelles, but affected the aggregation number and the cmc.