Synthesis of a new class of uridine phosphorylase inhibitors

A new series of potent uridine phosphorylase inhibitors have been prepared from barbituric acid. Among them, 1-[(2-hydroxyethoxy)methyl]-5-)(m--benzyloxy)benzylbarbituric acid ( 37 , BBBA) is the most promising having a K_i value of 1.1 ± 0.2 nM with uridine phosphorylase from human liver. The new inhibitors are easily synthesized and are better inhibitors of human uridine phosphorylase than their uracil counterparts.     

The Problem of Capacity Addition in Multi-user Elastic Demand Communication Networks

In this paper we consider some properties on prices under flow control in a network that is to be shared by noncooperative users. Each user is faced with an optimization problem which is formulated as the minimization of its own criterion subject to constraint on the flows of the other users. The operating points of the network are the Nash equilibria of the underlying routing game. Our objective is to study the behavior of prices of all users when the network designer needs to allocate capacities to network links. For parallel links topologies, we show that degradation of the performances such as prices will not take place, as well as the users may find it beneficial to improve their requests     

Approximating Clarke’s subgradients of semismooth functions by divided differences

We show that the algorithm presented in an earlier paper by Studniarski (Numer. Math., 55:685–693, 1989) can be applied, after only a small modification, to approximate numerically Clarke’s subgradients of semismooth functions of two variables. Results of computational testing of this modified algorithm are also reported.      

Structural and lithium intercalation studies of Mn(0.5−x)CaxTi2(PO4)3 phases (0≤x≤0.50)

Materials from the Mn_(0.5−x)Ca_xTi₂(PO₄)₃ (0≤x≤0.50) solid solution were obtained by solid-state reaction in air at 1000 °C. Selected compositions were investigated by powder X-ray diffraction analysis, ³¹P nuclear magnetic resonance (NMR) spectroscopy and electrochemical lithium intercalation. The structure of all samples determined by Rietveld analysis is of the Nasicon type with the R space group. Mn²⁺/Ca²⁺ ions occupy only the M1 sites in the Ti₂(PO₄)₃ framework. The divalent cations are ordered in one of two M1 sites, except for the Mn_0.50Ti₂(PO₄)₃ phase, where a small departure from the ideal order is observed by XRD and ³¹P MAS NMR. The electrochemical behaviour of Mn_0.50Ti₂(PO₄)₃ and Mn_(0.5−x)Ca_xTi₂(PO₄)₃ phases was characterised in Li cells. Two Li ions can be inserted without altering the Ti₂(PO₄)₃ framework. In the 0≤y≤2 range, the OCV curves of Li//Li_yMn_0.50Ti₂(PO₄)₃ cells show two main potential plateaus at 2.90 and 2.50–2.30 V. Comparison between the OCV curves of Li//Li_(1+y)Ti₂(PO₄)₃ and Li//Li_yMn_0.50Ti₂(PO₄)₃ shows that the intercalation occurs first in the unoccupied M1 site of Mn_0.50Ti₂(PO₄)₃ at 2.90 V and then, for compositions y>0.50, at the M2 site (2.50–2.30 V voltage range). The effect of calcium substitution in Mn_0.50Ti₂(PO₄)₃ on the lithium intercalation is also discussed from a structural and kinetic viewpoint. In all systems, the lithium intercalation is associated with a redistribution of the divalent cation over all M1 sites. In the case of Mn_0.50Ti₂(PO₄)₃, the stability of Mn²⁺ either in an octahedral or tetrahedral environment facilitates cationic migration.     

Polarization inscription in ferroelectric (111) PZT and (100) SBT films

Ferroelectric thin films form an equilibrium domain structure compatible with their respective crystallographic symmetry. In tetragonal (111) PZT, 90° domains prevail; in (pseudo-tetragonal) (100) SBT both 90° and 180° domains are present. The size of 90° domains has been measured for e.g., PZT as slabs of 15 nm width. Domain size is a result of stress minimization in the film during the paraelectric (PE) → ferroelectric (FE) transition. A precise and regular domain pattern for (111) PZT and (100) SBT films has been investigated in detail by TMSFM. Single domains can be addressed mechanically with the tip of an AFM. Such single domain switching corresponds to a data storage density of 200 Gbit/inch². Applications of ferroelectric and high- paraelectric materials for e.g., non-volatile data storage replacing DRAM devices or as sensors in infrared cameras are increasingly becoming popular.     

Determination of the gamma self-attenuation correction factors using intensity ratios

Summary The possible correlation between the self-attenuation correction in gamma-spectrometric assay of uranyl nitrate samples and spectral line intensity ratios was investigated experimentally and simulated numerically using MCNP code. The characteristic gamma- and X-lines of uranium were measured using a low energy Ge gamma-spectrometer. The simulation results agreed with the experimental data and showed obvious correlation between the self-attenuation correction and the intensity ratios [(185.7 keV)/(143.8 keV), (98.44 keV)/(185.7 keV) and (185.7 keV)/(63.23 keV)]. This correlation greatly simplifies the determination of the self-attenuation correction and reduces the troublesome traditional procedures used to determine this coefficient.     

Ion-interaction chromatography of several metallocyanide complexes stabilized by adding cyanide in a neutral mobile phase.

Standard solutions (at 10(-5) M levels) of Cu(I)- and Fe(II)-cyanide complexes were stabilized for at least 5 h using 0.5 mM cyanide solution (around pH 9) as a medium. Complexes of Cu(I)- and Fe(III)-cyanide also could be stabilized without any dissociation by adding 1 mM cyanide to an acetonitrile-water (18:82, v/v) mobile phase (pH 7.0) containing 10 mM tetra-n-propylammonium salt (TPA). Under the optimal conditions, the six complexes of Cu(I)-, Ag(I)-, Ni(II)-, Fe(II)-, Fe(III)- and Au(I)-cyanides were resolved from their mixtures within about 45 min, with well-shaped chromatographic peaks.     

Reactivity of a Ti–45.9Al–8Nb alloy in air at 700–900°C

A Ti–45.9Al–8Nb (at%) alloy with a lamellar structure (γ+α₂) was oxidised in air at 700, 800, 850 and 900°C in isothermal and thermal cycling conditions. The reaction progress was followed by thermogravimetric measurements. In isothermal conditions the oxidation kinetics followed approximately a parabolic rate law and the rate constants ranged from about 10^–12 kg² m^–4 s^–1 at 700°C to 10^–10 kg² m^–4 s^–1 at 900°C. The oxide scales were built of Al₂O₃ and TiO₂, the former being the main component of the outermost layer. The oxidation behaviour of Ti–45.9Al–8Nb was referred to a commercial titanium alloy, WT4 (Ti–6Al–1Mn), and selected oxidation-resistant alloys.     

Convergent Algorithm Based on Progressive Regularization for Solving Pseudomonotone Variational Inequalities

In this paper, we extend the Moreau-Yosida regularization of monotone variational inequalities to the case of weakly monotone and pseudomonotone operators. With these properties, the regularized operator satisfies the pseudo-Dunn property with respect to any solution of the variational inequality problem. As a consequence, the regularized version of the auxiliary problem algorithm converges. In this case, when the operator involved in the variational inequality problem is Lipschitz continuous (a property stronger than weak monotonicity) and pseudomonotone, we prove the convergence of the progressive regularization introduced in Refs. 1, 2.     

Robust H∞ control for linear Markovian jump systems with unknown nonlinearities

This paper studies the problem of stochastic stability and disturbance attenuation for a class of linear continuous-time uncertain systems with Markovian jumping parameters. The uncertainties are assumed to be nonlinear and state, control and external disturbance dependent. A sufficient condition is provided to solve the above problem. An H_∞ controller is designed such that the resulting closed-loop system is stochastically stable and has a disturbance attenuation γ for all admissible uncertainties. It is shown that the control law is in terms of the solutions of a set of coupled Riccati inequalities. A numerical example is included to demonstrate the potential of the proposed technique.