1,2,4-triazolium-cation-based energetic salts

3,4,5-Triamino-1,2,4-triazole (guanazine, 1) can be readily methylated with methyl iodide yielding methylguanazinium iodide (2). Salts containing the novel methylguanazinium cation with energetic anions were synthesised by metathesis reactions with silver azide (3), silver nitrate (4), silver perchlorate (5), sodium 5,5'-azotetrazolate (6), silver 5-nitrotetrazolate (7) and silver dinitramide (8), yielding a new family of heterocycle-based salts, which were fully characterised by analytical (mass spectrometry and elemental analysis) and spectroscopic methods (IR, Raman and NMR). In addition, the molecular structures of all compounds were confirmed by X-ray analysis, revealing extensive hydrogen-bonding in the solid state and densities between 1.399 (3) and 1.669 g cm(-3) (5). The hydrogen-bonded ring motifs are discussed in the formalism of graph-set analysis for hydrogen-bond patterns and compared to each other. Preliminary sensitivity testing of the crystalline compounds indicate surprisingly low sensitivities to both friction and impact, the highest friction and shock sensitivity being found for the perchlorate (5, 220 N) and the dinitramide (8, 20 J) salts, respectively. In addition, DSC analysis was used to assess the thermal stabilities of the compounds: 3-6 melt above 200 degrees C with concomitant decomposition, whereas 7 and 8 have clearly defined melting points at 162 and 129 degrees C, respectively, and with decomposition occurring about 30 degrees C above the melting point. Lastly all compounds have positive calculated heats of formation between 336 (4) and 4070 kJ kg(-1) (6) and calculated detonation velocities in the range between 8330 (7) and 8922 m s(-1) (6) making them of interest as new highly energetic materials with low sensitivity.     

Highly selective micro-sequential injection lab-on-valve (μSI-LOV) method for the determination of ultra-trace concentrations of nickel in saline matrices using detection by electrothermal atomic absorption spectrometry

A highly selective procedure is proposed for the determination of ultra-trace level concentrations of nickel in saline aqueous matrices exploiting a micro-sequential injection Lab-On-Valve (μSI-LOV) sample pretreatment protocol comprising bead injection separation/pre-concentration and detection by electrothermal atomic absorption spectrometry (ETAAS). Based on the dimethylglyoxime (DMG) reaction used for nickel analysis, the sample, as contained in a pH 9.0 buffer, is, after on-line merging with the chelating reagent, transported to a reaction coil attached to one of the external ports of the LOV to assure sufficient reaction time for the formation of Ni(DMG)₂ chelate. The non-ionic coordination compound is then collected in a renewable micro-column packed with a reversed-phase copolymeric sorbent [namely, poly(divinylbenzene-co-N-vinylpyrrolidone)] containing a balanced ratio of hydrophilic and lipophilic monomers. Following elution by a 50-μL methanol plug in an air-segmented modality, the nickel is finally quantified by ETAAS. Under the optimized conditions and for a sample volume of 1.8 mL, a retention efficiency of 70 % and an enrichment factor of 25 were obtained. The proposed methodology showed a high tolerance to the commonly encountered alkaline earth matrix elements in environmental waters, that is, calcium and magnesium, and was successfully applied for the determination of nickel in an NIST standard reference material (NIST 1640-Trace elements in natural water), household tap water of high hardness and local seawater. Satisfying recoveries were achieved for all spiked environmental water samples with maximum deviations of 6 %. The experimental results for the standard reference material were not statistically different to the certified value at a significance level of 0.05.     

Energetic 2,2‐Dimethyltriazanium Salts: A New Family of Nitrogen‐Rich Hydrazine Derivatives

Amination of 1,1‐dimethylhydrazine with NH₂Cl or hydroxylamine‐O‐sulfonic acid yields 2,2‐dimethyltriazanium (DMTZ) chloride ( 3 ) and sulphate ( 4 ), respectively. The DMTZ cation was paired with the nitrogen‐rich anions 5‐aminotetrazolate ( 5 ), 5‐nitrotetrazolate ( 6 ), 5,5′‐azobistetrazolate ( 7 ), and azide ( 8 ), yielding a new family of energetic salts. The synthesis was carried out by metathesis reactions of salts 3 or 4 and a suitable silver or barium salt. To minimize the risks involved when using heavy metal salts, we used electrodialysis for the synthesis of azide 8 , which avoids the use of highly sensitive species. The DMTZ derivatives were characterized by IR and multinuclear NMR spectroscopy, elemental analysis, and X‐ray diffraction. Thermal stabilities were measured using DSC analysis and their sensitivities towards classical stimuli were determined using standard tests. Lastly, the relationship between hydrogen bonding in the solid state and sensitivity is discussed.     

Vibrational spectroscopy differentiates between multipotent and pluripotent stem cells

Over the last few years, there has been an increased interest in the study of stem cells in biomedicine for therapeutic use and as a source for healing diseased or injured organs/tissues. More recently, vibrational spectroscopy has been applied to study stem cell differentiation. In this study, we have used both synchrotron based FTIR and Raman microspectroscopies to assess possible differences between human pluripotent (embryonic) and multipotent (adult mesenchymal) stem cells, and how O(2) concentration in cell culture could affect the spectral signatures of these cells. Our work shows that infrared spectroscopy of embryonic (pluripotent) and adult mesenchymal (multipotent) stem cells have different spectral signatures based on the amount of lipids in their cytoplasm (confirmed with cytological staining). Furthermore, O(2) concentration in cell culture causes changes in both the FTIR and Raman spectra of embryonic stem cells. These results show that embryonic stem cells might be more sensitive to O(2) concentration when compared to mesenchymal stem cells. While vibrational spectroscopy could therefore be of potential use in identifying different populations of stem cells further work is required to better understand these differences.     

The salting-out effect and phase separation in aqueous solutions of tri-sodium citrate and 1-butyl-3-methylimidazolium bromide

The aim of this work is to obtain further evidence about the salting-out effect produced by the addition of tri-sodium citrate to aqueous solutions of water miscible ionic liquid 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]) by evaluating the effect of tri-sodium citrate on the thermodynamic properties of aqueous solutions of this ionic liquid. Experimental measurements of density and sound velocity at different temperatures ranging from (288.15 to 308.15) K, the refractive index at 308.15 K and the liquid–liquid phase diagram at different temperatures ranging from (288.15 to 338.15) K for aqueous solutions containing 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]) and tri-sodium citrate (Na₃Cit) are taken. The apparent molar volume of transfer of [C₄mim][Br] from water to aqueous solutions of Na₃Cit have positive values and it increases by increasing salt molality. Although at high IL molality, the apparent molar isentropic compressibility shows similar behaviour with that of the apparent molar volume. However at low concentrations of IL, the apparent molar isentropic compressibility of transfer of [C₄mim][Br] from water to aqueous solutions of Na₃Cit have negative values. The effects of temperature and the addition of Na₃Cit and [C₄mim][Br] on the liquid–liquid phase diagram of the investigated system have been studied. It was found that an increase in temperature caused the expansion of the one-phase region. The presence of Na₃Cit triggers a salting-out effect, leading to significant upward shifts of the liquid–liquid de-mixing temperatures of the system. The effect of temperature on the phase-forming ability in the system investigated has been studied based on a salting-out coefficient obtained from fitting the binodal values to a Setschenow-type equation for each temperature. Based on cloud point values, the energetics of the clouding process have been estimated and it was found that both of entropy and enthalpy are the driving forces for biphasic formation.     

Influence of oxidising agents in lead determination by hydride generation direct flame atomic absorption spectroscopy

Summary The influence of Cr₂O₇ ^2–, MnO₄ ^–, Ce⁴⁺, H₂O₂ and S₂O₈ ^2– as oxidising agents in lead determination as volatile covalent hydride using NaBH₄ is reported in this paper.The reaction conditions for every oxidising agents (pH, quantity and concentration of the oxidising agent, quantity and concentration of the NaBH₄ and reaction time) are optimized, determining sensitivity and detection limit by measuring the peak height.The recovery of lead from solution has been measured by flameless atomic absorption spectroscopy.A linear relationship the logarithm of absorbance values and the redox potential of the system is obtained with a correlation coefficient of 0.999. The results and their interpretation are given in this paper.

---

Der Einflu oxidierender Reagentien auf die Bleibestimmung mittels Flammenatomabsorptionsspektrometrie nach Hydridbildung

Zusammenfassung Es wird über den Einfluß der Oxidantien Cr₂O₇, MnO₄ ^–, Ce⁴⁺, H₂O₂ und S₂O₈ ^{2 –} auf die Bleibestimmung als kovalentes Hydrid berichtet. Für jede oxidierende Substanz werden die Reaktionsbedingungen optimiert (pH, Menge und Konzentration des Oxidans, Menge und Konzentration von NaBH₄ und Reaktionszeit), um Empfindlichkeit und Nachweisgrenze durch Peakhöhenauswertung zu bestimmen.Die Wiederfindungsrate wurde durch elektrothermale Atomabsorptionsspektrometrie von Blei in der Lösung bestimmt.Der Zusammenhang zwischen dem Logarithmus der Extinktion und dem Redoxpotential des Oxidans ergibt eine lineare Beziehung mit einem Korrelationskoeffizienten von 0.999. Die Ergebnisse und deren Interpretation werden in dieser Arbeit beschrieben.

---

---

Paper presented to Euroanalysis V. Cracow, August 1984.     

Combination of solid-phase extraction-hollow fiber for ultra-preconcentration of some triazole pesticides followed by gas chromatography-flame ionization detection

In this study, an extraction and preconcentration technique using solid-phase extraction (SPE) along with hollow fiber (HF) has been developed as an ultra-preconcentration technique for some triazole pesticides in aqueous samples. Triazole pesticides were employed as model compounds to assess the method and were monitored by gas chromatography-flame ionization detection (GC-FID). Initially, an aqueous solution of target analytes was passed through an RP-8 SPE cartridge and then the adsorbed analytes were eluted with μL amounts of toluene. The collected elute was slowly introduced into an HF that had one end blocked. This allowed precipitation inside the lumen and pores of the HF. Finally, the obtained HF was mounted on a home-made solid-phase microextraction syringe and entered into the GC injection port for thermal desorption-GC analysis. The effect of various experimental parameters including injection port temperature, desorption time, state of HF, washing solvent, elution solvent and its volume, sample volume, etc. were investigated for finding the optimum conditions. The calibration graphs were linear in the ranges of 2-1000 ng/mL (penconazole and hexaconazole), 5-1000 ng/mL (tebuconazole), 15-1000 ng/mL (triticonazole) and the detection limits (LODs) ranged from 0.6 to 4.5 ng/mL. The enhancement factors were in the range of 870-950. The relative standard deviations (RSD%) for five repeated experiments (C=250 ng/mL of each pesticide) varied from 4.5 to 8.7%. The relative recoveries obtained for analytes in grape juice samples, spiked with different levels of each pesticide, were in the range of 87-119%.     

Modified carrageenan. 5. Preparation,swelling behavior,salt‐ and pH‐sensitivity of partially hydrolyzed crosslinked carrageenan‐graft‐polymethacrylamide superabsorbent hydrogel

The polysaccharide, kappa‐carrageenan (κC) was chemically modified to achieve a novel superabsorbent hydrogel via graft copolymerization of methacrylamide (MAM) onto the substrate followed by alkaline hydrolysis. Ammonium persulfate (APS) and N,N′‐methylene bisacrylamide (MBA) were used as a free‐radical initiator and a crosslinker, respectively. The saponification reaction was carried out using sodium hydroxide aqueous solution. Either κC‐g‐PMAM or hydrolyzed κC‐g‐PMAM (PMAM: polymethacrylamide) was characterized by FT‐IR spectroscopy. The effect of grafting variables (i.e. concentration of MBA, MAM, and APS) and alkaline hydrolysis conditions (i.e. NaOH concentration, hydrolysis time and temperature) were systematically optimized to achieve a hydrogel with swelling capacity as high as possible. The swelling capacity of these hydrogels was also measured in various salt solutions. Results indicated that the swelling ratios decreased with an increase in the ionic strength of the salt solutions. This behavior can be attributed to charge screening effect for monovalent cations, as well as ionic crosslinking for multivalent cations. Absorbency of superabsorbing hydrogels was examined in buffer solutions with pH range 1–13. Also, the pH reversibility and on–off switching behavior, at pH values 3.0 and 8.0, makes the synthesized hydrogels good candidates for controlled delivery of bioactive agents. Finally, swelling kinetics in distilled water and various salt solutions was preliminary investigated. Results showed that the swelling in water was faster than in saline solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

Ni(II), Co(II), and Cu(II) complexes incorporating 2-pyrazinecarboxylic acid：Synthesis,characterization, electrochemical evaluation,and catalytic activity for the synthesis of 2H-indazolo[2,1-b]phthalazine-triones

Three complexes containing 2-pyrazinecarboxylate (pzca–), including [Ni(pzca)2(H2O)2], [Co(pzca)2(H2O)2], and [Cu(pzca)2(H2O)2], have been synthesized and characterized using physico-chemical and spectroscopic methods. Furthermore, the structure of each complex was determined by single-crystal X-ray diffraction. All three complexes have an octahedral geometry, where the metal ion chelated by two carboxylate oxygens, two nitrogen atoms belonging to pyrazinic acid molecules, and two oxygen atoms of two water molecules. The catalytic activities of these complex-es were also investigated in the green synthesis of 2H-indazolo[2,1-b]phthalazine-triones by the reaction of hydrazine hydrate with an arylaldehyde, phthalic anhydride, and dimedone in acetic acid.     

Bi-phasic nanostructures for functional applications

Biphasic solid state composites of the type metal/metal oxide or element/element oxide can be synthesized in one pot chemical reactions using so called molecular "single source precursors". Due to their singular genesis these composites show peculiar hetero-structures based on core-shell hierarchies such as superlattices and composite nanospheres or nanowires. They exhibit superior or new functional properties compared to their individual constituent compounds. In the current work, we review in particular the synthetical and mechanistical approach of bi-phasic (Al/Al(2)O(3)) nanostructures such as nanospheres, nanowires and nanoloops using a single source precursor. Other bi-phasic materials of the general formula M/MO(x) (for example M = Ge, Sn, Pb) are addressed for comparison. The impact of different synthetical conditions as well as of modification of surfaces by laser techniques and their technological relevance are presented briefly. Additionally, functional applications of the prepared surfaces are explained with some outstanding case studies. These case studies are primarily concerned with their use as biomaterials and their application in medicine as well as with their use as thin films for optics and functional surfaces.